Vertical File Cabinet
Product Information: Vertical File Cabinet
The vertical file cabinet is a storage unit designed for
organizing and storing important documents and files. The cabinet
has four drawers, with each drawer featuring a label holder and
slide suspension for easy access. The cabinet is made of durable
steel and has a sleek design that complements any workspace.
Safety & Warnings
Before assembling and using the vertical file cabinet, please
read the instruction manual carefully and strictly follow the
assembly instructions. Check whether all parts are intact and
confirm the model of various parts before assembly. Mismatched
parts may cause damage to the product. Assemble on the box to avoid
damaging the product and room floor.
Part List
- Component 1: (x1)
- Component 2: (x1)
- Component 3: (x1)
- Component 4: (x4)
- Component 5: (x4)
- Component 6: (x1)
- Component 7: (x2)
- Component 8: (x2)
- Component 9: (x2)
- Component 10: (x2)
- Component 11: (x2)
- Component 12: (x2)
- Component 13: (x2)
- Component A: (x4)
- Component B: (x8) M4 x 6
- Component C: (x4)
- Component D: (x12)
- Component E: (x2)
- Component F: (x4)
Installation Instructions
- Attach Component 4 to Component 2 as shown in the picture.
- Attach Component 5 to Component 3 as shown.
- Attach Component 7 to Component 3.
- Upright the assembled part of step 3. Then attach Component 2
and Component 6 to the assembled part of step 3 as shown. - Insert two Component E into the corresponding position as
shown. - Attach Component 1 to the top of the vertical file
cabinet. - Attach four Component C to the bottom of the cabinet with
Component D. - Fold the two sides of Component 8 as shown in the picture.
- Attach Component A to Component 9 with Component B.
- Attach Component 9 to the assembled part of Component 8. Flex
the corresponding position as shown. - Attach Component 10 to the assembled part of step 10 as
shown. - Fold the two sides of Component 11 as shown in the
picture. - Attach Component A to Component 12 with Component B.
- Attach Component 12 to Component 11. Flex the corresponding
position as shown. - Attach Component 13 to the assembled part of step 14.
- Put the four drawers inside the cabinet frame and put Component
F in the corresponding position as shown.
Cleaning & Care
Only clean the vertical file cabinet using a damp cloth and mild
detergent. Do not use bleach or abrasive cleaners. Regularly check
all fastenings to ensure that they are properly tightened. This
product should not be discarded with household waste. Take it to
your local authority waste disposal center.
VERTICAL FILE CABINET
1
SAFETY & WARNINGS
Warning Check you have all the components and tools listed on pages 3-5. Remove all fittings from the plastic bags and separate them into their groups. During assembly children should be kept away from the product due to possible risk of injury. Make sure you have enough space to layout the parts before starting. Do not stand or put weight on the product, this could cause damage. Assemble the item as close to its final position (in the same room) as possible. Assemble on a soft level surface to avoid damaging the unit or your floor. We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers. Parts of the assembly will be easier with 2 people. Do not use this item if any components are missing or damaged. Dispose of all packaging carefully and responsibly. Assembly to be carried out by a competent adult only.
Assembly Tips Please read the instruction manual carefully to understand the matters needing attention in the process of installation and maintenance. Strictly follow the assembly instructions. Carefully check whether the parts in the box are intact. Assemble on the box so as not to damage the product and room floor. The use of mismatched parts may cause damage to the product. Please confirm the model of various parts before assembly. 2
PART LIST
3
COMPONENTS
1: (x1)
2: (x1)
3: (x1)
4: (x4)
5: (x4)
6: (x1)
7: (x2)
8: (x2)
9: (x2)
10: (x2)
11: (x2)
4
12: (x2)
13: (x2)
A: (x4)
B: (x8) M4 x 6
C: (x4)
D: (x12)
E: (x2)
F: (x4)
5
INSTALLATION
Step 1 Attach 4 to 2 as shown in the picture.
Step 2 Attach 5 to 3 as shown.
6
Step 3 Attach 7 to 3.
Step 4 Upright the assembled part of step 3. Then attach 2 and 6 to the assembled part of step 3 as shown.
7
Step 5 Insert two E into the corresponding position as shown.
Step 6 Attach 1 to the top of the vertical file cabinet.
8
Step 7 Attach four C to the bottom of the cabinet with D.
Step 8 Fold the two sides of the 8 as shown in the picture.
9
Step 9 Attach A to 9 with B.
Step 10 Attach 9 to the assembled part of 8. Flex the corresponding position as shown.
10
Step 11 Attach 10 to the assembled part of step 10 as shown.
Step 12 Fold the two sides of the 11 as shown in the picture.
11
Step 13 Attach A to 12 with B.
Step 14 Attach 12 to 11. Flex the corresponding position as shown.
12
Step 15 Attach 13 to the assembled part of step 14.
Step 16 Put the four drawers inside the cabinet frame and put the F in the corresponding position as shown.
13
CLEANING & CARE
Only clean using a damp cloth and mild detergent, do not use bleach or abrasive cleaners.
Regularly check all fastenings to ensure that they properly tightened. This product should not be discarded with household waste. Take to your
local authority waste disposal centre.
14
