DGS-111 Mosquito Catching Lamp
Product Information
Product name: Photocatalysis mosquito trapping lamp
Voltage: 5V
Product power: 5W
Product Usage Instructions
Working Principle
This equipment is a photocatalysis inhalation mosquito killer.
LED lamp bulbs are used in the lamp tube. The generated light will
attract the mosquito to approach the light source. The air
generated by the fan will quickly inhale it into the mosquito box
of the equipment. The insects are then dried and dehydrated to
death. The mosquito killer itself is non-toxic, smokeless, and
odorless.
Issues Requiring Attention
Environment of use: For indoor use only (not suitable for
stables, barns, or similar locations).
Common Fault Guide
Cannot start the whole machine: This may be due to
incorrect plugging. Check if there is electricity at the power
supply.
The fan has an abnormal sound: There may be a foreign
body in contact with the fan. Clean the lamp and remove any foreign
body, mosquitoes, etc.
The light is on but the fan does not turn on or the fan is on
but the light is not: This indicates a product fault. Please
contact the company’s customer service. If you are unable to
contact customer service, ask the dealer where you purchased the
product for assistance.
Mosquito catching lamp DGS-111
USER MANUAL
Product description
Product name: Photocatalysis mosquito trapping lamp Voltage: 5V Product power: 5W
Method of use
1. Please use the same voltage as the description. 2. To turn on the unit simply plug the USB cable of the unit into a 5V power source (cell phone charger for example) . At this point, the fan and LED light should start working. To turn off the equipment, disconnect the power cable. 3. When cleaning the mosquito debris, turn off the power supply first. Pick up the mosquito lamp with one hand and place it on top of the trash can (to prevent mosquitoes from falling on the floor). Pull out the mosquito storage box with the other hand in reverse to remove the mosquitoes. 4. After cleaning the mosquitoes, the machine can be put back into the room for use.
Working Principle
This equipment is a photocatalysis inhalation mosquito killer. LED lamp bulbs are used in the lamp tube. The generated light will attract the mosquito to approach the light source. The air generated by the fan will quickly inhale it into the mosquito box of the equipment. The insects are then dried and dehydrated to death. The mosquito killer itself is non-toxic, smokeless and odorless.
Issues requiring attention
1. When using the mosquito killer, turn off the light or reduce the light in the mosquito killing area as much as possible to avoid interference from other light sources (such as fluorescent lamp, TV set, light from outside the window, etc.). Avoid strong wind (such as fan, air conditioner, etc.) blowing directly on the machine. The best effect is to use the machine in an enclosed space without people present. 2. When the product is working, it is strictly forbidden to look at the light source for a long time, to avoid eye irritation caused by the light source. 3. During use, the mosquito killer should be placed in a place where children cannot touch it. Do not insert fingers or metal objects to avoid accidents. 4. If the power cord or fan is damaged, to avoid danger, send it to a professional for maintenance or replacement. 5. When not in use for a long time, unplug the power cord and store it properly in a safe place.
Environment of use
For indoor use only (not suitable for stables, barns or similar locations).
Common fault guide
Cannot start the whole machine May be plugged in incorrectly Check there is electricity at the power supply.
The fan has an abnormal sound There may be a foreign body in contact with the fan. Clean the lamp and remove any foreign body, mosquitoes, etc…
The light is on but the fan does not turn on or the fan is on but the light is not. This is a product fault. Please contact the company’s customer service. If you are unable to contact customer service, ask the dealer where you purchased the product for assistance.
