Backyard 2101555 Beaumont 14 Ft. X 12 Ft. Light Brown All Cedar Wooden Pergola Instruction Manual (+ PDF)

It is critically important that you start with square and level
footings, concrete pad or deck to attach your structure. Post
mounts are provided with your structure which allows you to
permanently install your structure to a pre-existing or new wood or
concrete surface. See Anchor Instructions for further details and
recommendations. You must ensure there is ample structural support
under the deck before permanently attaching.

Dimensions:

Length: 14’2 5/8″ (4.3m)
Width: 12’1/8″ (3.7m)
Height: 11’0″ (3.4m)

OWNER’S MANUAL – ANCHORING LAYOUT

See Anchor Instructions for further details and
recommendations.

OWNER’S MANUAL – PARTS IDENTIFICATION

Wood Components (Not to Scale):

D01 JOIST END – W4L15500 (4) 1 3/8×5 1/4×35 1/2
(36x134x902)
D02 JOIST END – W4L15501 (4) 1 3/8×5 1/4×35 1/2
(36x134x902)
D03 JOIST END – W4L15502 (2) 1 3/8×5 1/4×15 (36x134x382)
D04 JOIST END – W4L15503 (2) 1 3/8×5 1/4×15 (36x134x382)
D05 JOIST END – W4L15504 (2) 1 3/8×5 1/4×56 3/8
(36x134x1431)
D06 JOIST END – W4L15505 (2) 1 3/8×5 1/4×56 3/8
(36x134x1431)
D07 JOIST – W4L15506 (4) 1 3/8×5 1/4×83 1/8 (36x134x2112)
D08 JOIST – W4L15518 (2) 1 3/8×5 1/4×65 1/2 (36x134x1664)
D09 JOIST – W4L15519 (2) 1 3/8×5 1/4×74 1/2 (36x134x1893)
D10 JOIST – W4L15520 (2) 1 3/8×5 1/4×74 1/2 (36x134x1893)
D11 CORBEL – W4L15510 (8) 1 3/8×5 1/4×32 1/2 (36x134x826)
D12 CORBEL – W4L15513 (3) 1 3/8×5 1/4×28 1/4 (36x134x719)
D13 CORBEL – W2A03243 (1) 1 3/8×5 1/4×28 1/4 (36x134x719)
P10 PURLIN END – W4L15521 (14) 1 3/8×1 3/8×68 3/4
(36x36x1746)
P11 PURLIN END – W4L15522 (14) 1 3/8×1 3/8×89 1/2
(36x36x2274)
D14 SLOTTED JOIST – W4L15515 (8) 1 3/8×5 1/4×55 3/4
(36x134x1416)
D15 SLOTTED JOIST – W4L15517 (8) 1 3/8×5 1/4×89 1/2
(36x134x2274)
P01 POST – W2A03241 (2) 6x6x89 1/2 (152x152x2274)
P02 POST – W2A03242 (2) 6x6x89 1/2 (152x152x2274)

Hardware Components:

H100459 BOLT WH BLK (74) 5/16×1 1/4
H100195 BOLT WH BLK (50) 5/16×2 3/4
H101058 BOLT WH BLK (34) 5/16×8 3/4
H100204 LAG SCREW WH BLK (18) 5/16×5 1/2
H100471 LAG SCREW WH BLK (34) 5/16×1 1/2
H100397 BOLT WH BLK (15) 1/4×1 1/4
H100792 LAG SCREW WH BLK (13) 1/4×3
H100198 WASHER LOCK (173) EXT BLK 8×19
H100405 WASHER LOCK (28) EXT BLK 6×15
H100379 T-NUT BLK (155) 5/16×5/8
H100398 T-NUT BLK (15) 1/4×7/16
H100764 (1) SCREW SETTER
H100201 SCREW PFH BLK (102) 8×2 1/2
H100200 SCREW PFH BLK (17) 8×1 1/2
H100202 SCREW PWH BLK (2) 8×5/8
H100630 WASHER FLAT BLK

Product Usage Instructions:

Ensure that the footings, concrete pad or deck are square and
level before attaching the structure.
Post mounts are provided with the structure, which allows you
to install it permanently to a pre-existing or new wood or concrete
surface. See Anchor Instructions for further details and
recommendations.
Ensure there is ample structural support under the deck before
permanently attaching the structure.
Refer to the Owner’s Manual for parts identification and
hardware components.
Follow the Basic Setup Dimensions & Assembly Notes in the
Owner’s Manual for proper assembly of the structure.

View Fullscreen

Manufactured by: Backyard Discovery 3305 Airport Drive, Pittsburg, KS 66762 800-856-4445
Basepoint Business Centre: Rivermead Drive,Westlea, Swindon SN5 7EX Phone: 0800-118-2476 J.P. Coenstraat 7, The Bridge, The Hague, 2595 WP, Netherlands Phone: 08005678990
BEAUMONT 14X12 PERGOLA
MODEL: # 2101555

ONLY AVAILABLE IN NORTH AMERICA

Please visit www.backyarddiscovery.com
For the most up to date assembly manual, to register your product, or to order replacement parts Para obtener instrucciones en español, visite www.backyarddiscovery.com

EASY STEP-BY-STEP
3D INTERACTIVE INSTRUCTIONS
DOWNLOAD THE FREE APP

INSTALLATION SERVICES AVAILABLE!*
See inside for details
ONLY AVAILABLE IN UNITED STATES

Made in China INS-2101555-A-BEAUMONT 14X12 PERGOLA ENG 10-11-21

OWNER’S MANUAL – BASIC SETUP DIMENSIONS & ASSEMBLY NOTES
It is critically important that you start with square and level footings, concrete pad or deck to attach your structure
· Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly · Remember to double check for underground utilities and overhead electrical lines
Post mounts are provided with your structure which allows you to permanently install your structure to a pre-existing or new wood or concrete surface. See Anchor Instructions for further details and recommendations.
· The hardware to attach the post mounts to the structure is included. · The hardware to mount the structure permanently to a concrete surface is included. · The hardware to mount the structure permanently to a wood deck is NOT included and will need to be purchased
separately. You must ensure there is ample structural support under the deck before permanently attaching.

12′ 1/8″ 3.7m

14’2 5/8″ 4.3m
14′ 1/8″ 4.3m
11’0″ 3.4m 12’0″ 3.7m
2

7′ 7/8″ 2.2m 6’7 5/8″ 2.0m

9’0″ 2.7m
10’0″ 3.0m

7’11 1/8″ 2.4m
7′ 7/8″ 2.2m

OWNER’S MANUAL – ANCHORING LAYOUT
3

OWNER’S MANUAL – PARTS IDENTIFICATION
Wood Components (Not to Scale)

D01 JOIST END – W4L15500 (4) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D02 JOIST END – W4L15501 (4) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D03 JOIST END – W4L15502 (2) 1 3/8″x5 1/4″x15″ (36x134x382)

D04 JOIST END – W4L15503 (2) 1 3/8″x5 1/4″x15″ (36x134x382)

D05 JOIST END – W4L15504 (2) 1 3/8″x5 1/4″x56 3/8″ (36x134x1431)
D06 JOIST END – W4L15505 (2) 1 3/8″x5 1/4″x56 3/8″ (36x134x1431)
D07 JOIST – W4L15506 (4) 1 3/8″x5 1/4″x83 1/8″ (36x134x2112)
D08 JOIST – W4L15518 (2) 1 3/8″x5 1/4″x65 1/2″ (36x134x1664)
D09 JOIST – W4L15519 (2) 1 3/8″x5 1/4″x74 1/2″ (36x134x1893)
D10 JOIST – W4L15520 (2) 1 3/8″x5 1/4″x74 1/2″ (36x134x1893)

OWNER’S MANUAL – PARTS IDENTIFICATION
Wood Components (Not to Scale)
D11 CORBEL – W4L15510 (8) 1 3/8″x5 1/4″x32 1/2″ (36x134x826)
D12 CORBEL – W4L15513 (3) 1 3/8″x5 1/4″x28 1/4″ (36x134x719)
D13 CORBEL – W2A03243 (1) 1 3/8″x5 1/4″x28 1/4″ (36x134x719) P10 PURLIN END – W4L15521 (14) 1 3/8″x1 3/8″x68 3/4″ (36x36x1746) P11 PURLIN END – W4L15522 (14) 1 3/8″x1 3/8″x89 1/2″ (36x36x2274)
D14 SLOTTED JOIST – W4L15515 (8) 1 3/8″x5 1/4″x55 3/4″ (36x134x1416)
D15 SLOTTED JOIST – W4L15517 (8) 1 3/8″x5 1/4″x89 1/2″ (36x134x2274) P01 POST – W2A03241 (2) 6″x6″x89 1/2″ (152x152x2274) P02 POST – W2A03242 (2) 6″x6″x89 1/2″ (152x152x2274)
5

OWNER’S MANUAL – PARTS IDENTIFICATION
Hardware Components

H100459 BOLT WH BLK (74) 5/16×1 1/4
H100195 BOLT WH BLK (50) 5/16×2 3/4
H101058 BOLT WH BLK (34) 5/16×8 3/4
H100204 LAG SCREW WH BLK (18) 5/16×5 1/2
H100471 LAG SCREW WH BLK (34) 5/16×1 1/2
H100397 BOLT WH BLK (15) 1/4×1 1/4
H100792 LAG SCREW WH BLK (13) 1/4×3

H100198 WASHER LOCK (173) EXT BLK 8×19
H100405 WASHER LOCK (28) EXT BLK 6×15

H100379 T-NUT BLK (155) 5/16×5/8
H100398 T-NUT BLK (15) 1/4×7/16

H100764 (1)

SCREW SETTER

H100201 SCREW PFH BLK (102) 8×2 1/2
H100200 SCREW PFH BLK (17) 8×1 1/2

H100202 SCREW PWH BLK

(2)

8×5/8

H100630 WASHER FLAT BLK

(18)

8×19

H100120 SCREW CONCRETE ANCHOR (18) 1/4×2

H100114 TORX WRENCH

(1)

T-30

H100147 TORX BIT

(1)

T-30

A100042 TORX BIT

(1)

T-40

A100041 TORX WRENCH

(1)

T-40

H101100 MAGNETIC DRIVER
(1) 6

OWNER’S MANUAL – PARTS IDENTIFICATION
Accessory Components (Not to Scale)

A100241
(1)

BYD ID TAG (SMALL) WITHOUT AGES

A4M(x080)977 POST ANCHORING PLATE

A4M(x080)978 POST PLATE

A6P(x040)308 6×6 POST FOOT

9205413
(1)

ELECTRICAL ENCLOSURE

PRE-ASSEMBLY STEP 1 – SORTING PARTS
It is critical for ease of assembly that you take the time to sort and organize the wood and hardware. WOOD PARTS: · Organize wood parts by the three-digit, alpha-numeric number stamped on each board (ex. P01). · If there are multiple boards with the same stamped number, stack those pieces together. · Stamps can be found on the flat surface of the boards or on the end of the boards. · Allow yourself plenty of room – the wood pieces can take up a significant amount of space.
NOTE: CARTONS ARE NOT ORGANIZED BY BOARD NUMBER.
HARDWARE PARTS: · We recommend that you have a separate table to organize the hardware. · Hardware bags are printed with a seven-digit, alpha-numeric part number. · You can organize your hardware by part number or group by hardware type (i.e. bolts, nuts, etc.). · During assembly you only need to reference the last four digits of the number.
H100194 BOLT WH (x2) 5/16 x 2-1/2
8

PRE-ASSEMBLY STEP 2 – TOOLS REQUIRED

Drill Attachments: Phillips Head

Open End Wrenches 1/2″ &
9/16″

Cordless Drill or Electric Drill

1/8″, 3/16″, 3/8″ & 7/16″ Drill Bits
Phillips Screw Driver

3/8″ Drive Ratchet, 1/2″ & 7/16″ STD Sockets 1/2″ & 7/16″
Deep Sockets

Claw Hammer Square

Rubber Mallet – Optional

Tape Measure

Level 24″

PRE-ASSEMBLY STEP 3 – CHOOSE YOUR ASSEMBLY METHOD
There are several types of assembly instructions available to you. 1. Printed Assembly Manual included with your set 2. BILT APP – 3D interactive instructions 3. Combination of the Printed Manual and BILT APP (Note: Step numbers can differ between the two
methods)
10

STEP 4 – PERGOLA ASSEMBLY

P01 POST – W2A03241 (2) 6″x6″x89 1/2″ (152x152x2274)
P02 POST – W2A03242 (2) 6″x6″x89 1/2″ (152x152x2274)
COMPLETE THIS STEP TWICE.

A6P(x040)308 6×6 POST FOOT

H100200 SCREW PFH BLK (16) 8×1 1/2

STEP 5 – PERGOLA ASSEMBLY

D01 JOIST END – W4L15500 (1) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D02 JOIST END – W4L15501 (1) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D07 (1)

JOIST – W4L15506
1 3/8″x5 1/4″x83 1/8″ (36x134x2112)

D12 CORBEL – W4L15513 (1) 1 3/8″x5 1/4″x28 1/4″ (36x134x719)

D13 CORBEL – W2A03243 (1) 1 3/8″x5 1/4″x28 1/4″ (36x134x719)

H100195 BOLT WH BLK (8) 5/16×2 3/4

H100198
(8)

WASHER LOCK EXT BLK 8×19

H100379
(8)

T-NUT BLK 5/16×5/8

STEP 6 – PERGOLA ASSEMBLY

D01 JOIST END – W4L15500 (1) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D02 JOIST END – W4L15501 (1) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D07 JOIST – W4L15506 (1) 1 3/8″x5 1/4″x83 1/8″ (36x134x2112)

D12 CORBEL – W4L15513 (2) 1 3/8″x5 1/4″x28 1/4″ (36x134x719)

H100195 BOLT WH BLK (8) 5/16×2 3/4

H100198
(8)

WASHER LOCK EXT BLK 8×19

H100379
(8)

T-NUT BLK 5/16×5/8

STEP 7 – PERGOLA ASSEMBLY

D01 JOIST END – W4L15500 (2) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D02 JOIST END – W4L15501 (2) 1 3/8″x5 1/4″x35 1/2″ (36x134x902)

D07 JOIST – W4L15506 (2) 1 3/8″x5 1/4″x83 1/8″ (36x134x2112)

COMPLETE THIS STEP TWICE.

H100459 BOLT WH BLK (16) 5/16×1 1/4

H100198
(16)

WASHER LOCK EXT BLK 8×19

H100379
(16)

T-NUT BLK 5/16×5/8

STEP 8 – PERGOLA ASSEMBLY
P01 POST – W2A03241 (2) 6″x6″x89 1/2″ (152x152x2274)
P02 POST – W2A03242 (2) 6″x6″x89 1/2″ (152x152x2274)
(2) OUTER JOIST ASSEMBLY – FROM PREVIOUS STEPS
(2) INNER JOIST ASSEMBLY – FROM PREVIOUS STEPS
COMPLETE THIS STEP TWICE.

H101058 BOLT WH BLK (16) 5/16×8 3/4

H100792 LAG SCREW WH BLK H100405 WASHER LOCK

(4) 1/4×3

(4) EXT BLK 6×15

H100198 WASHER LOCK (16) EXT BLK 8×19

H100379 T-NUT BLK (16) 5/16×5/8

STEP 9 – PERGOLA ASSEMBLY
D09 JOIST – W4L15519 (2) 1 3/8″x5 1/4″x74 1/2″ (36x134x1893)
D10 JOIST – W4L15520 (2) 1 3/8″x5 1/4″x74 1/2″ (36x134x1893)
D11 CORBEL – W4L15510 (4) 1 3/8″x5 1/4″x32 1/2″ (36x134x826)
COMPLETE THIS STEP TWICE.

H100195 BOLT WH BLK (16) 5/16×2 3/4

H100459 BOLT WH BLK (8) 5/16×1 1/4

H100198 WASHER LOCK (24) EXT BLK 8×19

H100379 T-NUT BLK (24) 5/16×5/8

STEP 10 – PERGOLA ASSEMBLY

D05 JOIST END – W4L15504 (2) 1 3/8″x5 1/4″x56 1/4″ (36x134x1431)

D06 JOIST END – W4L15505 (2) 1 3/8″x5 1/4″x56 1/4″ (36x134x1431)

D08 JOIST – W4L15518 (2) 1 3/8″x5 1/4″x65 3/4″ (36x134x1664)

D11 CORBEL – W4L15510 (4) 1 3/8″x5 1/4″x32 1/2″ (36x134x826)
COMPLETE THIS STEP TWICE.

H100195 BOLT WH BLK (16) 5/16×2 3/4

H100459 BOLT WH BLK (16) 5/16×1 1/4

H100198 WASHER LOCK (32) EXT BLK 8×19

H100379 T-NUT BLK (32) 5/16×5/8

STEP 11 – PERGOLA ASSEMBLY
(2) OUTER JOIST ASSEMBLY – FROM STEP 9 (2) INNER JOIST ASSEMBLY – FROM STEP 10
D03 JOIST END – W4L15502 D04 JOIST END – W4L15503 (2) 1 3/8″x5 1/4″x15″ (36x134x382) (2) 1 3/8″x5 1/4″x15″ (36x134x382)

H101058 BOLT WH BLK (16) 5/16×8 3/4

H100792 LAG SCREW WH BLK H100405 WASHER LOCK

(8) 1/4×3

(8) EXT BLK 6×15

H100198 WASHER LOCK (16) EXT BLK 8×19

H100379 T-NUT BLK (16) 5/16×5/8

STEP 12 – PERGOLA ASSEMBLY
D14 SLOTTED JOIST – W4L15515 (8) 1 3/8″x5 1/4″x55 3/4″ (36x134x1416)
D15 SLOTTED JOIST – W4L15517 (8) 1 3/8″x5 1/4″x89 1/2″ (36x134x2274)
COMPLETE THIS STEP EIGHT TIMES.

H100459 BOLT WH BLK (32) 5/16×1 1/4

H100198
(32)

WASHER LOCK EXT BLK 8×19

H100379
(32)

T-NUT BLK 5/16×5/8

STEP 13 – PERGOLA ASSEMBLY
(8) SLOTTED JOIST ASSEMBLY – FROM PREVIOUS STEPS

H100204 LAG SCREW WH BLK (16) 5/16×5 1/2
H100198 WASHER LOCK (16) EXT BLK 8×19

STEP 14 – PERGOLA ASSEMBLY
P10 PURLIN END – W4L15521 (14) 1 3/8″x1 3/8″x68 3/4″ (36x36x1746)
P11 PURLIN END – W4L15522 (14) 1 3/8″x1 3/8″x89 1/2″ (36x36x2274)
COMPLETE THIS STEP FOURTEEN TIMES.

H100397 BOLT WH BLK (14) 1/4×1 1/4

H100405
(14)

WASHER LOCK EXT BLK 6×15

H100398
(14)

T-NUT BLK 1/4×7/16

STEP 15 – PERGOLA ASSEMBLY
(14) PURLIN ASSEMBLY – FROM PREVIOUS STEPS

H100201 SCREW PFH BLK

(98)

8×2 1/2

STEP 16 – PERGOLA ASSEMBLY

A4M(x080)977 POST ANCHORING PLATE
REPEAT THIS STEP FOR EACH POST.

A4M(x080)978 POST PLATE

H100471 LAG SCREW WH BLK (32) 5/16×1 1/2

STEP 17 – PERGOLA ASSEMBLY

A100241
(1)

BYD ID TAG (SMALL) WITHOUT AGES

H100202 SCREW PWH BLK (2) 8×5/8

STEP 18 – PERGOLA ASSEMBLY

H100120 SCREW CONCRETE ANCHOR

(16)

1/4×2

H100630 WASHER FLAT BLK

(16)

8×19

REPEAT THIS STEP FOR EACH POST FOOT.

ELECTRICAL ENCLOSURE

9205413
(x1)

ELECTRICAL ENCLOSURE

FOR ELECTRICAL ENCLOSURE INSTALLATION REFER TO ASSEMBLY INSTRUCTIONS THAT COME PACKAGED WITH THE ELECTRICAL ENCLOSURE KIT. INSTALL ON ANY POST THAT IS DESIRED. FOLLOW DIRECTIONS FOR PROPER INSTALLATION.

PowerPortTM
Model # 9205413 Wood Post Mounting Instructions

MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive Pittsburg, KS 66762 800-856-4445

9205413
(x1)

ELECTRICAL ENCLOSURE

H100966 SCREW RAISED HEAD

(x4)

8×1 1/2

2 3/8 in [60 mm]

2 3/8 in [60mm] 966 (x4)
SCREW – 1 1/2″
413 (x1)
ELECTRICAL ENCLOSURE
POST

20 1/8 in [512mm]

PRE-DRILL 1/8 IN – (3mm) PILOT HOLES USING THE DIMENSIONS PROVIDED.

20 1/8 in [512 mm]

ENSURE THAT CORD END IS NOT WITH-IN 6″- (152mm) OF THE GROUND WHEN MOUNTING.
Made in China | INS-9205413-A-POWERPORT-ENG 2-3-2022

PowerPort
Model # 9205413 Metal Post Mounting Instructions

MANUFACTURED BY: Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 800-856-4445

A4M01292
(x2)

MOUNTING BRACKET

9205413
(x1)

ELECTRICAL ENCLOSURE

H100746 SCREW TAPPING

(x4)

10×1 1/4

FCC MARKING:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC INSTRUCTIONS:
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.