2AEAN-WMETX Compact Digital Wireless Microphone System
Product Information – RX Wireless ME and TX Wireless ME
The RX Wireless ME and TX Wireless ME are wireless transmitters
and receivers that allow you to transmit audio wirelessly from a
microphone to a recording device or mixer. These devices operate on
a frequency range of 2.402 – 2.480 GHz and have a maximum output
power of < 10dBm. The transmitter and receiver have unique IDs
and IC numbers for identification.
Important Safety Information
North America: This transmitter must not be co-located operated
in conjunction with any other antenna or transmitter. This device
complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference
received, including interference that may cause undesired
operation. This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
EU Compliance Statement: Changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This device contains
licence-exempt transmitter(s)/ receiver(s) that comply with
Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two
conditions: (1) This device may not cause interference. (2) This
device must accept any interference, including interference that
may cause undesired operation of the device.
Product Usage Instructions
1. Charge both the transmitter and receiver fully before
use.
2. Turn on the receiver and transmitter by pressing and holding
the power button until the LED light turns on.
3. Pair the transmitter with the receiver by pressing the “Pair”
button on both devices. The LED light should blink rapidly to
indicate pairing mode.
4. Connect the receiver to your recording device or mixer using
the appropriate cable (not included).
5. Turn on your recording device or mixer and ensure that the
input source is set to the receiver.
6. Turn on your microphone and ensure that it is paired with the
transmitter.
7. Adjust the levels on your recording device or mixer as
necessary.
8. Record your audio wirelessly!
RX WIRELESS ME
Wireless ME Quick-start Guide
TX WIRELESS ME
RX WIRELESS ME
TX WIRELESS ME
RX
WIRELESS ME
TX WIRELESS ME
The Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S and other countries
IMPORTANT SAFETY INFORMATION
1. Read and understand the instructions and safety guide completely before using the product. 2. Ensure both the instruction manual and safety guide are accessible to all users, including when passing the product on to third parties. 3. Only use this product with authorised RØDE accessories. 4. Do not open the product housing. This will void the warranty. 5. Refer all service and repairs to RØDE-approved service personnel. Service or repair is required for product that have been damaged, exposed to liquid, rain or moisture, or do not operate normally. 6. Use the product only in the ways described in the instructions. 7. Do not use the product if it was damaged during transportation. 8. Keep the product away from liquids and electrically conductive objects that are not necessary for operation. 9. Do not use any solvents or corrosive cleaning agents to clean the product. 10. Do not adjust the controls of the product in an environment that requires your attention (operating machinery, driving etc.). 11. This product contains battery that is only replaceable by a skilled person.
NORTH AMERICA
This transmitter must not be co-located operated in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is not guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected 4. Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
EU Compliance Statement
Hereby, RØDE Microphones declares that the radio equipment type Wireless ME is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.rode.com/wireless-me
Frequency Range: 2.402 – 2.480 GHz
Maximum Output Power: < 10dBm
For details of EU representative go to http://en.rode.com/distributors
TAIWAN
()
EURO
USA
CANADA AUSTRALIA/ NEW ZEALAND
UKCA
Transmitter ID: 2AEAN-WMETX Receiver ID: 2AEAN-WMERX Transmitter IC: 20091-WMETX Receiver IC: 20091-WMERX
ID: R-R-R72-WMETX Company Name: RØDE Microphones
Model: Wireless ME – Transmitter Country of Origin: Australia
ID: R-R-R72-WMERX Company Name: RØDE Microphones
Model: Wireless ME – Receiver Country of Origin: Australia
TAIWAN
Transmitter ID: Receiver ID:
JAPAN
Transmitter: Wireless ME – Transmitter Receiver: Wireless ME – Receiver
INDIA POWER RATING
MEXICO
Note of Disposal WEEE Directive (2012/19/EU)
The crossed-out bin symbol on a product and/or packing indicates that this product should not be discarded with general domestic waste, but must be collected separately at the end of its service life.Please observe the legal regulations on electrical waste segreation and disposal applicable in your country.
RØDE Microphones, 107 Carnarvon St, Silverwater NSW 2128, Australia Authorised UK Representative: RØDE UK, Unit A, 23-25 Sunbeam Rd, London NW10 6JP, United Kingdom Authorised EU Representative: RØDE EU, Neukirchner Str. 18, 65510 Hünstetten, Germany
LOVE YOUR WIRELESS ME?
SHARE WITH US
#rodemic
@rodemic @rodemic
rode.com
@rodemics @rode
SCAN FOR MORE INFO
Where To Buy | RØDE Microphones
RØDE Microphones | Premium Microphones & Audio Equipment
Wireless ME | Compact Wireless Microphone System | RØDE
