43262014 Plaster Painting Kit
Instruction Manual
43262014 Plaster Painting Kit
- Take out a bowl and a mixing spoon, and prepare a cup of clear water. Cut open the pack of plaster powder and place the powder and water in the bowl. Mix together until combined.
- Place the mold tray into water, then remove and shake off any excess water. Place tray on a flat surface. Pour the mixed plaster into the moulds (do not overfill), and gently shake the mold tray to eliminate the air in the mould. Once the plaster has become solid, take a scraper and gently scrape the surface of the plasters.
- Wait about 1 hour for the plaster to be completely set. Lay a soft cloth on the table, gently beat the surface, and carefully remove the plasters from the mould.
- Once the plasters are completely dry, you can decorate them with paint. You may refer to the examples on the packaging or create your own design.
Green = yellow + blue Pink = red + white Orange = yellow + red Sky blue = white + blue Purple = blue + red Lemon yellow = yellow + little blue Cyan = blue + white + little yellow Brown = yellow + red + little black 
- Cut (scissors not included) the magnetic strip into several sections, and stick on the back of the plasters.
User care instructions: Avoid leaving the magnets on metallic surfaces for long periods of time as they may result in dirt build-up and rust formation.
Ensure the metallic surfaces are always kept clean and free from humidity, take special care below water & ice dispensers.
Never drag the magnets on the metallic surfaces to avoid damaging the finish.
