P-VBAP-01 V-Mount Battery Adapter Plate Mount

V-Mount Battery Adapter Plate Mount (P-VBAP-01)

Assembly Manual

What’s In The Box

• L-Type Allen key (3mm)
• L-Type Allen key (3mm)

All rights reserved. No part of this document may be reproduced,
stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photo-copying, recording, or
otherwise, except as may be expressly permitted by the applicable
copyright statutes or in writing by the Publisher.

Battery Adapter Plate Setup

The V-Mount Battery Adapter Plate Mount (P-VBAP-01) is designed
to allow you to attach a V-Mount battery to your camera rig. To set
up the adapter plate, follow these steps:

1. Use the L-Type Allen key (3mm) to attach the adapter plate to
   your camera rig. Make sure it is securely fastened.
2. Attach the V-Mount battery to the adapter plate. Make sure it
   is securely attached.
3. Connect the V-Mount battery to your camera using the
   appropriate cable.

Note: Make sure to use a V-Mount battery that is compatible with
your camera.

YOUR PROAIM AIRWAVE ULTRA VIBRATION ISOLATOR ARM ALL DRESSED UP
AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

1
V-Mount Battery Adapter Plate Mount
(P-VBAP-01)
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
L-Type Allen key (3mm)
L-Type Allen key (3mm)
All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable
copyright statutes or in writing by the Publisher.

2
Battery Adapter Plate Setup
· Now loose the lever lock to open clamp of battery plate .
· Mount the battery plate on the airwave and tighten the clamp to secure .
· Attach one end of D-Type Cable to batter plate.
· Attach other end of D­type cable to mounting plate .
· Now attach battery on the battery plate by sliding.
· Turn switch on which is on the side of battery plate .

3
YOUR PROAIM AIRWAVE ULTRA VIBRATION ISOLATOR ARM ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.