Anker 547 USB-C Hub
(7-in-2, for Macbook)
USER MANUAL
At a Glance
| Item | Description |
| 1.USB-C connector | Plug into the MacBook’s dual USB-C port |
| 2.Multi-function port (USB-C port) | • Connect to a USB-C charger to provide pass-through charging for your MacBook • Connect to a USB-C device to transfer data at speeds up to 40 Gbps • Connect to one monitor directly (two monitors via an HDMI adapter) to stream video at resolutions up to 5K©60 Hz |
| 3.HDMI port | Connect to a device with an HDMI port to stream video at resolutions up to 4K©60 Hz |
| 4.USB-A data port | Connect to a USB-A device to support data transfer at speeds up to 5 Gbps |
| 5.USB-C data port | Connect to a USB-C device to support data transfer at speeds up to 5 Gbps |
| 6.SD / microSD Card Slot | •UHS-I, 104 MB/s •The SD 3.0 card slot lets you insert an SD 3.0 card to copy files to and from your device. |
Specifications
| Data Speed | 40 Gbps / 5Gbps |
| Supported Systems | macOS 12 or later |
Important Safety Instructions
• Avoid dropping.
• Do not disassemble.
• Do not expose to liquids.
• For the safest and fastest charge, use original or certified cables.
• This product is suitable for moderate climates only.
• The maximum ambient temperature when using this product must not exceed 95°F / 35°C.
• Open flame sources, such as candles, must not be placed near this product.
• Only use a dry cloth or brush to clean this product.
Trademarks
HIGH-DEFINITION MULTIMEDIA INTERFACE
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party contract for EU matters: Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and ElectronEquipment Regulations 2012 & Electromagnetic Compatibility Regulations 2016
The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.
The following importer is the responsible party contract for UK matters:
Anker Technology (UK) Ltd
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party contract for FCC matters:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Customer Service
Lifetime Technical Support
[email protected]
[email protected] (For Middle East and Africa Only)
(US/CA) +1 (800)988 7973
(UK) +44 (0) 1604 936200
PAP 22
Raccolta Carta
For FAQs and more information, please visit:
anker.com/support
 |  |  |
| @anker_offcial @anker_jp | @Anker Deutschland @Anker Japan @Anker | @Anker Offcial @Anker_JP |
Product Number: A8354 51005003724
V01
download - Anker US
Anker | Live Charged. - Anker US
