Studio Side Rack 10U
Product Information
The Thon Studio Side Rack 10U is a studio rack designed for
organizing and storing audio equipment. It is made of durable
materials and comes with various components for easy assembly.
Safety Instructions
Ensure the safety of children by keeping plastic bags,
packaging, and small parts out of their reach to prevent choking
hazards. When assembling the rack, be cautious of sharp edges on
tools, screws, and components to avoid injury to the hands.
Scope of Delivery
Before assembling the rack, ensure that all the components
listed in the package are present.
Installation
To install the Thon Studio Side Rack 10U, follow these
steps:
- Place all components on a suitable mounting surface, using soft
padding to prevent surface damage. - Refer to the provided figure for an overview of the individual
components. - Insert the connector housings, connecting bolts, and wooden
pegs into the corresponding holes in the components. - Ensure that the connector housings are positioned correctly and
that the connecting bolts are fully inserted into the holes. - Tighten the connector housings to secure the connection between
the components. - Repeat this process for each component, including the left side
panel, right side panel, base panel, cover panel, front panel, and
base. - Check all connections to ensure a tight fit.
Once the assembly is complete, your Thon Studio Side Rack 10U is
ready for use. Enjoy organizing your audio equipment in this
functional and sturdy studio rack.
Assembly Instructions
Thon Studio Side Rack 10U
Studio Rack
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de
21.07.2022, ID: 547450, 547455, 547457, 547460, 547461
Table of contents
Table of contents
1 Safety instructions………………………………………………………………………………………………………………………………………………………………………………………. 5 2 Scope of delivery…………………………………………………………………………………………………………………………………………………………………………………………. 6 3 Installation…………………………………………………………………………………………………………………………………………………………………………………………………….. 7 4 Technical specifications…………………………………………………………………………………………………………………………………………………………………………… 14 5 Protecting the environment…………………………………………………………………………………………………………………………………………………………………… 15
3 Thon Studio Side Rack 10U
Studio Rack
4 Thon Studio Side Rack 10U Studio Rack
1 Safety instructions
Safety instructions
DANGER! Danger for children Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke! Never let children play unattended with the product.
CAUTION! Risk of injury to the hands When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components.
5 Thon Studio Side Rack 10U
Studio Rack
Scope of delivery
2 Scope of delivery
Before you assemble your rack, make sure the contents of package is complete according to the following list.
n 2 × side panel, melamine-coated 19 mm furniture board n 1 × floor panel, melamine-coated 19 mm furniture board n 1 × cover panel, melamine-coated 19 mm furniture board n 1 × base, melamine-coated 19 mm furniture board n 1 × front panel, melamine-coated 19 mm furniture board n 2 × rack rails, 10 U, stepless, equipped with nuts and rubber piping n 12 × woodscrew for rack rail n 16 × connector housing n 16 × connector bolts n 8 × wooden dowel n 4 × braking furniture caster n 16 × raised countersunk screw 4,8×16 n 1 × assembly instruction n 1 × installation template for rack rail
6 Thon Studio Side Rack 10U Studio Rack
3 Installation
Installation
Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces.
Overview
The following figure shows an overview of the individual components.
ö
#
$
A
B
C
D
E
%
&
‘
F
G
1
Left side panel
2
Right side panel
A
Connector bolt
B
Connector housing
7 Thon Studio Side Rack 10U
Studio Rack
Installation
3
Base panel
4
Cover panel
5
Front panel
6
Base
C
Wooden dowel
D
Woodscrew for rack rail
E
Raised countersunk screw 4,8×16
F
Rack rail 10 U
G
Furniture caster
8 Thon Studio Side Rack 10U Studio Rack
Installation
Preparing the components
Insert the connector housings, the connecting bolts and the wooden pegs into the holes provided in the components, as shown in the figure below.
Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow posi- tion of the connector housings points towards the hole.
After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associated component are tightened.
ö#
$
9 Thon Studio Side Rack 10U
Studio Rack
Installation %
1
Left side panel
2
Right side panel
3
Base panel
4
Cover panel
5
Front panel
10 Thon Studio Side Rack 10U Studio Rack
& ‘
6
Base
A
Connector bolt
B
Connector housing
C
Wooden dowel
Installation
Assembling the components Place the base panel, the base and the front panel onto the connecting bolts of the left side panel. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts.
‘
$
&
ö
1
Left side panel
3
Base panel
5
Front panel
6
Base
11 Thon Studio Side Rack 10U
Studio Rack
Installation
Place the cover panel onto the connecting bolts of the left side panel. Tighten the connector housings clockwise to lock the connec- tion with the inserted connecting bolts. Place the right side panel on the pre-assembled unit consisting of the left side panel, base plate, base, front panel and cover plate. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts. Check all connections for tight fit.
#
%
2
Right side panel
12 Thon Studio Side Rack 10U Studio Rack
4
Cover panel
Installation
Set the fully assembled unit onto the rack rail front. Screw the four casters into the holes provided in the base panel , each with four raised countersunk screw.
Set up the rack. Screw the rack rails to the inside of the rack, parallel to the front edge, using six wood screws each. We recommend a distance of approx. 1.5 cm from the front edge. A mounting template is included for easy installation.
E
G
D
F F
D
Woodscrew for rack rail
E
Raised countersunk screw 4,8×16
F
Rack rail 10 U
G
Furniture caster
13 Thon Studio Side Rack 10U
Studio Rack
Technical specifications
4 Technical specifications
Thon Studio Side Rack 10U WH, white Thon Studio Side Rack 10U BK, graphite Thon Studio Side Rack 10U oak Thon Studio Side Rack 10U beech Thon Studio Side Rack 10U maple Rack units Installation depth Inclination Dimensions (W × H × D) Weight
Item number 547450 Item number 547455 Item number 547457 Item number 547460 Item number 547461 10 min. 276 mm 45° 540 mm × 632 mm × 570 mm approx. 12.6 kg
14 Thon Studio Side Rack 10U Studio Rack
5 Protecting the environment
Disposal of the packaging material
Protecting the environment
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of.
Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
15 Thon Studio Side Rack 10U
Studio Rack
Notes
16 Thon Studio Side Rack 10U Studio Rack
Notes
17 Thon Studio Side Rack 10U
Studio Rack
Notes
18 Thon Studio Side Rack 10U Studio Rack
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
Welcome – Thomann United States
