43144792 4 IN 1 Canopy Trike
Product Information: 4 IN 1 Canopy Trike
The 4 IN 1 Canopy Trike is a multi-functional tricycle designed
for children. It can be used in four different modes, including
vertical (fixed), push up to fold handlebar, horizontal (folded),
and rotate seat modes. The trike comes with a front fender, rear
wheels basket, handlebar, pedal, seat, canopy, push bar, and bottle
cage. The canopy can be adjusted by pulling out both buckles, and
the push bar can be disassembled by pressing the bottom button. The
trike is made in China and comes with assembly instructions.
Product Usage Instructions:
- Install the front fender by inserting the front fork to the
main frame with the silver button backward. - Install the front wheel.
- Insert the rear wheels under the rear frame and tighten the
screw. - Pull the red ring down to fold and unfold the pedal.
- Install the rear basket.
- Use the hex wrench to assemble the seat with the screw and
washer. - Install the canopy by inserting the buckle and adjust its angle
by pulling out both buckles. - Install the push bar and assemble the bottle cage. Press the
bottom button to disassemble the push bar.
Maintenance:
- Inspect all fasteners prior to each use.
- Do not ride the trike in any extreme weather conditions.
- Always check your trike for loose screws, aging parts, broken
materials, and stitching. Replace and repair when needed. - Keep the trike clean, and it is strictly forbidden to place
sharp objects or blades on the trike to avoid injury to
children. - Use neutral detergent when washing the textile with the water
of 10-40, to avoid the fabric damaged. - Clean the trike with a dry towel.
- Assemble or disassemble this trike should follow this
instruction sheet strictly to avoid damage.
4 IN 1 CANOPY TRIKE
ASSEMBLY INSTRUCTIONS
Keycode:43144792
Screw, washer, hex wrench
1.Install the front fender and Insert the front fork to the main frame, silver button is backward
2.Install the front
3.Insert the rear wheels
basket and handlebar then tighten the screw
under the rear frame
4.Pull the red ring down to fold and unfold the pedal
5.Install the rear basket
6.Use the hex wrench to assemble the seat with the screw and washer
7.Install the canopy by inserting the buckle, adjust the angle of canopy by pulling out both buckles
8.Install the push bar, then assemble the bottle cage, press the bottom button to disassembly the push bar
4 IN 1 MODE
FUNCTION INTRODUCTION
Vertical: Fixed
Push up to
Horizontal: Folded fold handlebar
Folded
Adjust the push bar
Rotate seat
WARNING 1. This trike is only suitable for children aged 12 months 5 years old. 2. An adult must read these instructions carefully before use, otherwise it might compromise the child’s safety. 3. Please retain this instruction sheet permanently for future reference. 4. This trike should not be used near fire, heat, or water. 5. Assembly should be done by an adult. 6. Only loading one child at a time. 7. It’s prohibited to use the spare parts not provided by the manufacture. 8. Children are not allowed to climb out of the guardrail or stand on the seat. 9. Disposed the plastic bag to avoid suffocation after open the carton. 10. Adult supervision is required when using this trike. 11. Not to be used on the sloped driveways, inclines and public highways, uneven surfaces ground. 12. Maximum weight limit is 25kg.
MAINTENANCE 1. Inspect all fasteners prior to each use. 2. Do not ride the trike in any extreme weather conditions. 3. Always check your trike for loose screws, ageing parts, broken materials and stitching, replace and
repair when needed. 4.Keep the trike clean, and it is strictly forbidden to place sharp objects or blades on the trike to
avoid injury to children. 5. Use neutral detergent when washing the textile with the water of 10-40, to avoid the fabric damaged. 6. Clean the trike with dry towel. 7. Assemble or unassemble this trike should follow this instruction sheet strictly to avoid damage.
Made in China
