Beautme Bm3c Wall-mounted Led Bathroom Mirror User Manual (+ PDF)

Horizontal: Screw holes located at the bottom left.
Vertical: Screw holes located at the bottom right.
Take off the sticker.
Put the tray on before installation and tighten with
screws.
Connect to power source directly by using the plug
installed.
Through the connector provided, here is how:
1. Remove the plug by pulling up the buttons of the
  connector.
2. Connect the wire from your home power source to one end of the
  connector.
3. Make sure all wires are settled firmly.

View Fullscreen

Operating Instruction

OFF

Anti-Fog switch (automatically turn off after 2 hours)

OFF

Turn on or off the LED lights

Touch to switch White Light / Natural Light / Warm Light

Long press to adjust light brightness

Notice
For warranty , please kindly contact us for return policy if any issues happen. (1) Please read the instructions carefully before using. (2) Make sure that your charging device is adequate for the mirror voltage rating before
using. (3)Turn off the power and avoid direct sunlight if not used or stored for a long time. Far
away from children’s access. (4) Please do not disassemble or remodel mirror, and keep it away from sharp things. (5) Please do not use corrosive liquids to clean the mirror. (6) Please do not violently throw, hit and rub mirror. (7) Do not approach or put the product into the fire in case of fire or explosion. (8) Please stop using it immediately if an abnormality occurs.

USER MANUAL

WALL-MOUNTED LED BATHROOM MIRROR

29.5mm / 1.2″

915mm / 36″

132mm / 5.2″

400mm / 15.7″

710mm / 28″

Product Information

Name Model Voltage Lighting Power Anti-fog Power Input Product Size Frame Color Color Temperature Material

Wall-Mounted LED Bathroom Mirror BM3C 12V 4A Max 48W Max 30W UL110V 915×710×29.5mm (36×28×1.2 inches) Silver White Light 6500K, Natural Light 4800K, Warm Light 3200K Aluminium + Glass

Product Installation

Accessories included

Tray *1

Tray screw and washer
*3

Foam pads *2

Hook *2

Expansion Hook screw

pipe *4

Step 1. Tray installation

1. This mirror supports two wall-mounted methods, Horizontal or Vertical 2. Fix the tray to the mirror according to your actual situation

Step 2. Foam pads installation
1. Paste the foam pad to 2. Horizontal paste position 3. Vertical paste position the back of the mirror
Step 3. Wall-Mounted Ways and

1. Use the level vial to choose a suitable location on the wall and mark it

2. Drill holes and insert the expansion tube into the hole

3. Fix the hook with 4. Hang up the

screws

mirror as above

demonstration

Step 4. Two Ways Of Connection

a. Horizontal Screw holes located at the bottom left

b. Vertical Screw holes located at the bottom right

c. take off the sticker d. Put the tray on before installation and tighten with screws

1. connect to power source directly by using the plug installed

2. Through the connector provided, here is how:
a. remove the plug by pull up the buttons of the connector
b. connect the wire from your home power source to one end of the connect
c. make sure all wires settled firmly