Bestway 58516e Flowclear 800 Gallon Sand Filter Pump Owner's Manual (+ PDF)

Home » Blog » Bestway 58516e Flowclear 800 Gallon Sand Filter Pump Owner's Manual

Contents hide

1 58516E Flowclear 800 Gallon Sand Filter Pump

2 Product Information

3 Product Usage Instructions

3.1 Documents / Resources

3.1.1 References

58516E Flowclear 800 Gallon Sand Filter Pump

Product Information

Product Name: 58516E Sand Filter

Manufacturer: Bestway

Website: bestwayusa.com

Product Usage Instructions

Ensure that the pool is installed at least 6 feet (1.8 m) away
from any electrical outlet and portable appliances are placed at
least 5 feet (1.5 m) away from the pool.
Do not bury the cord to minimize damage from lawn mowers, hedge
trimmers, or other equipment.
Inspect the cord regularly and replace it immediately if
damaged.
Connect the sand filter only to a grounding type receptacle
protected by a Class A ground fault circuit interrupter
(GFCI).
To test the GFCI, push the test button. The GFCI should
interrupt power. Push the reset button to restore power. If the
GFCI fails to operate correctly, do not use the pump and contact a
qualified service representative.
This pump is designed for use with storable pools only. Do not
use it with permanently-installed pools.
Follow the installation instructions provided to mount the unit
securely to the base.

Note: For more detailed information, refer to
the owner’s manual provided or visit the manufacturer’s website for
FAQ, manuals, videos, or spare parts support.

View Fullscreen

58516E
OWNER’S MANUAL
bestwayusa.com/support Visit the Bestway YouTube channel

Visit www

.bestwayusa.com/suppo
WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS? MISSING PARTS?
For FAQ, Manuals, Videos Or Spare Parts, Please Visit bestwayusa.com/support

rt for help

OWNER’S MANUAL
58516E Sand Filter
Visit the Bestway YouTube channel

SAFETY INSTRUCTIONS
WARNING IMPORTANT SAFETY INSTRUCTIONS
When installing and using this electrical equipment, basic safety precautions should always be followed, including the following:
READ AND FOLLOW ALL INSTRUCTIONS WARNING – TO REDUCE THE RISK OF INJURY – do not permit children to
use this product unless they are closely supervised at all times.
WARNING – RISK OF ELECTRIC SHOCK – Connect only to a grounding type
receptacle. This product is provided with a ground-fault circuit-interrupter. If replacement of the plug is needed, use only identical replacement parts.
WARNING – The unit is provided with a ground-fault circuit-interrupter (GFCI).
To test the GFCI,push the test button. The GFCI should interrupt power. Push the reset button. Power should be restored. If the GFCI fails to operate in this manner, the GFCI is defective. If the GFCI interrupts power to the pump without the test button being pushed, a ground current is flowing, indicating the possibility of an electric shock. Do not use this pump. Disconnect the pump and have the problem corrected by a qualified service representative before using.
CAUTION – To reduce the risk of electric shock the pool must be installed no
closer than 6 feet (1.8 m) from any electrical outlet. Do not place portable appliances closer than 5 feet (1.5 m) from the pool. DO NOT BURY CORD – Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment.
WARNING – To reduce the risk of electric shock, replace damaged cord immediately. WARNING – To reduce the risk of electric shock, do not use extension cord to
connect unit to electric supply; provide a properly located outlet.
CAUTION: This pump is for use with storable pools only. Do not use with
permanently-installed pools. A storable pool is constructed so that it is capable of being readily disassembled for storage and reassembled to its original integrity. A permanently-installed pool is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage. Please examine and verify all sand filter
2

components are present before use. Notify Bestway at the customer service address listed on this manual for any damaged or missing parts at the time of purchase. · THERMALLY PROTECTED MOTOR. CSA ENCLOSURE 3 · FOR USE WITH SWIMMING POOLS ONLY.
CAUTION: TO ENSURE CONTINUED PROTECTION AGAINST SHOCK
HAZARD,USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING.
WARNING: RISK OF ELECTRIC SHOCK. CONNECT ONLY TO A GROUNDING
TYPE RECEPTACLE.
CAUTION: THIS PUMP IS FOR USE WITH STORABLE POOLS ONLY – DO
NOT USE WITH PERMANENTLY-INSTALLED POOLS.
CAUTION: CONNECT ONLY TO GROUNDING TYPE RECEPTACLE
PROTECTED BY A CLASS A GROUND FAULT CIRCUIT INTERRUPTER.
CAUTION: FOR CONTINUED PROTECTION AGAINST POSSIBLE ELECTRIC
SHOCK THIS UNIT IS TO BE MOUNTED TO THE BASE IN ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
WARNING – RISK OF ELECTROCUTION
1) Connect Only To Properly Grounded Outlet. Do Not Remove Ground Pin. 2) Inspect Cord Before Using Do Not Use If Cord Is Damaged. 3) Keep Ground-Fault Circuit-Interrupter Dry And Off The Ground. 4) Do Not Touch Plug With Wet Hands. 5) Double Insulated When Servicing Use Only Identical Replacement Parts. 6) Read Instruction Manual Before Using. DO NOT REMOVE THIS TAG
SAVE THESE INSTRUCTIONS.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING: Any changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. – Consult the dealer or an experienced radio/ TV technician for help.
3

POOL SUCTION FITTING INSTRUCTIONS
When installing and using this equipment, basic safety precautions shall always be followed, including the following:
IMPORTANT SAFETY INSTRUCTIONS READ, FOLLOW, AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS.

– Any modification that increases the flow rate of the circulation system shall require

re-evaluation of the cover/grate and sump to ensure that the flow rating of the Suction

Outlet Fitting Assembly (SOFA) is not exceeded.

– Missing, broken, or cracked cover/grates, sumps, mud-frames, or any other SOFA

component shall be replaced before bathers are allowed to use the pool.

– Loose cover/grates shall be reattached before bathers are allowed to use the pool.

1. Replace suction fittings every 2 years.

2. The use of adhesives or other attachment methods that prevent access to suction piping

or SOFA components requiring periodic servicing is prohibited.

3. Refer to the following diagram for each SOFA component part instructions:

4. – Any field modification made to a SOFA not authorized by the manufacturer’s installation

instructions shall void the SOFA certification.

– No modification shall be made to a SOFA structure or flow path unless the new

configuration has been certified as new SOFA.

– Cover/grates and all other SOFA components shall

be replaced at or before the end of their service life

and that service life begins the month and year in

which a SOFA component is installed with or

F4030-01

without water.

5. Winterizing instructions. Dry the suction fittings completely, and store the product in a dry room at a F4030-03

storage temperature of 15 ~ 40 .

F4030-02

6. Use the screwdriver (not included) to disassemble

the suction fitting to clean or service.

– Cover/grate, including fasteners, shall be observed

for damage or tampering each operational day.

– Missing, broken, or cracked cover/grates shall be replaced before bathers are allowed

to use the pool.

– Loose cover/grates and associated components shall be reattached before bathers are

allowed to use the pool.

– SOFA components and fastener receptacles shall be clean and free of debris or

obstructions during installation of cover/grate and fasteners.

– Remember to hand-check cover/grate for snugness to the sump/ frame after

installation.

7. Before using the product, please check the integrity of the head of the suction fitting. If the product is broken, cracked, or the color has significantly faded, please do not use it.
8. – All SOFAs shall be installed in accordance with the manufacturer’s installation instructions. – No modification shall be made to a SOFA structure or flow path unless the new configuration has been certified to the original SOFA. – These SOFA-configuration specific flow ratings NOT be exceeded at any time the pool is open to bathers. – Cover/grates, when installed, shall not protrude more than 2 in. (51 mm) from the finished surface of the pool in which the SOFA is installed.
9.
Installation Information label (copy) Manufacturers name: GOLEADER INDUSTRIES (JINHUA) CO., LTD. Cover part number: F4030 Service life of the cover: 2 Years Cover flow rating: 28 GPM Installer needs to fill in the balance of the information and permanently post it as near as feasible to the pump control. Keep a copy of this information with the other important pool related documents. Configuration and installed orientation:_________ Location:_______ Installed Date:_________
Please research and download General Certificate of Conformity through www.bestwayusa.com
SAVE THESE INSTRUCTIONS
GFCI WARNING WARNING: Risk of electric shock. The GFCI must be tested before each use. WARNING: Do not use the pump if this test fails. For assistance, please visit
the support section on our website, www.bestwayusa.com.
5

SPECIFICATIONS
270mm 311mm

620mm

Filter Diameter Effective Filter Area: Max. Operating Pressure: Working sand filter pressure: Max. Water Temperature: Sand: Sand Size: Sand Capacity:

270 mm 0.059 m2 (0.635 ft2) 0.42 Bar (6 PSI) <0.25 Bar (3.5 PSI) 35°C Not included #20 silica sand, 0.45-0.85 mm Approximately 8.5 kg

PARTS REFERENCE OVERVIEW
Before assembling the sand filter, take a few minutes to become familiar with all the sand filter parts.

A
x3

x1 x1

7 8 9

16 10

NO.

6 11

x11

17 -1

17 -2

17 -1

17 -2

ASSEMBLY (You will need a screwdriver.)

1. Carefully remove all components from the package and check to ensure nothing is damaged. If equipment is damaged, immediately notify the retailer from where the equipment was purchased.
2. The sand filter should be placed on solid, level ground, preferably a concrete slab. Position the sand filter so the Ports and Control Valve are accessible for operation, servicing and winterizing.
3. The sand filter must be vertically fixed on ground or a certain pedestal made of wood or concrete before use to prevent the sand filter from accidental falling. Fully assembled sand filter will exceed 18 kg. The mounting holes should be 8 mm in diameter and spaced 285 mm apart. Use two bolts and nuts with a maximum of 8 mm in diameter to fasten the sand filter to the pedestal.

Bestway
8mm

LOAD POOL-GRADE FILTER SAND/FLOWCLEARTM POLYSPHERE.

NOTE: Use only special pool-grade filter sand, free of all limestone or clay: #20 Silica sand 0.45-0.85 mm, approximately one 8.5 kg bag should suffice. If you do

285mm

not use the recommended size filter sand, filtering performance will be reduced

and the sand filter may damaged, thereby voiding warranty.

NOTE: To avoid damaging the Skimmer when adding sand, pour some water into the Bottom Tank to submerse the

Skimmer on the Collector Hub.

NOTE: Sand/FlowclearTM Polysphere not included.

NOTE: Use 28 g (0.06 lbs) FlowclearTM Polysphere to replace 1 kg (2.20 lbs) sand.

3
MAX MIN

4
#20 0.45-0.85 mm

MAX

MIN

7
c

CONNECT TO THE POOL
V1.1

B B
B

A
A
B

V1.2

B B
B

A
A
B
B

AA BB

B AA

LOWERING OR DRAINING POOL WATER

STOP

Before switching on, please read the manual carefully.

GFCI TEST
1

2
RESET
TEST

3
RESET TEST

4
RESET
TEST

OPERATION

CONTROL VALVE OVERVIEW

WARNING: To prevent equipment damage and possible

injury, always switch off sand filter before changing the

Control Valve function. Changing valve positions while the

pump is running can damage the Control Valve, which may

cause personal injury or property damage.

How to Use the Control Valve:

Press down on the Control Valve handle and rotate to

desired function.

CONTROL VALVE FUNCTIONS

The Control valve is used to select 6 different filter functions:

Filter, Rinse, Circulate, Backwash, Closed and Drain.

Filter: This function is used to filter pool water and should be positioned here 99% of the time. Water is pumped through the sand filter, where it is cleaned and returned to the pool.
C A

Closed: This function stops water flowing between the sand filter and the pool.
C A

C C
B B
9

Backwash: This function is used to clean the sand bed; water is pumped down through the Collector Hub, upwards through the sand bed, and deposited out of Port D.
C A
D
C B
Drain: This function drains water from the pool; another filter by pass setting, water is pumped and deposited out of Port D, instead of returning it to the pool.
C A
D

Rinse: This function for initial startup, cleaning, and sand bed leveling after Backwash; water is pumped downwards through the sand bed, up through the Collector Hub and deposited out of the valve Port D.
C A
D
C B
Circulate: This function circulates pool water by passing the sand filter; use this function if the filter is broken to collect debris in the Debris Screens.
C A
D

NOTE: · Be sure all provisions for wastewater disposal meet applicable local, state
or national codes. Do not discharge water where it will cause flooding or damage. · When the Control Valve is set to the Backwash, Rinse, or Drain position, water will discharge from Port D on the Control Valve. · Do not switch on or operate the sand filter with the Control Valve set to the Closed function or it will seriously damage the sand filter. · Do not set the Control Valve between two functions, or it will lead to leaking. · To avoid water leakage, insert the Port D Cap onto the Control Valve Port D before operating the sand filter.

D
C D

AIR RELEASE Press down the control valve handle and wait untill the water flow from Port D to release the air. NOTE: It is important to repeat this operation every time you start the pump after winterizing, maintenance and backwashing the sand bed.

1.4

FIRST TIME USE INSTRUCTIONS

Backwash and Rinsing must be performed to prepare the pump for its first use and to wash the sand.

CAUTION: DO NOT DRY RUN THE SAND FILTER

1. Press down on the Control Valve handle and rotate to the Backwash function.

2. Plug in and run the sand filter for 3-5 minutes, or until the water runs clear.

3. Switch off the sand filter and set the Control Valve to the Rinse function.

4. Switch on the sand filter and run the sand filter for 1 min. This circulates

water backwards through the sand filter and drains water out Port D.

Backwash

Rinsing

5. Switch off the sand filter. Set the Control Valve to the Closed function.

6. Top up pool water if required.

IMPORTANT: This procedure removes water from the pool, which you’ll need to replace. Switch off the sand filter

immediately if water levels near the pool’s Inlet and Outlet valves.

1. Now the sand filter is ready for use. Set the Control Valve to the Filter function. NOTE: To prevent the risk of electrical shock dry any excess water from yourself and the sand filter. 2. Switch on the sand filter to run it. NOTE: The sand filter has now started its filtering cycle. Check that water is returning to the pool and take note of the filter pressure on Pressure Gauge. Generally, the recommended sand filter pressure is less than 0.25 Bar (3.5 PSI) when it is running.

1.2

SAND FILTER MAINTENANCE
CAUTION: You must ensure the sand filter is switched off and unplugged before any maintenance begins or severe risk of injury or death exists. As dirt builds up in the sand filter, the pressure reading on Pressure Gauge will increase. When the Pressure Gauge is 0.25 Bar (3.5 PSI) or higher, or water flow to the pool is too low, it is time to clean the sand. To clean the sand bed, follow all instructions outlined previously in: Backwash and Rinsing.
NOTE: Pressure gauge is for maintenance purpose only, and the pressure gauge value is just for reference, it should not be used as a precision instrument. NOTE: We recommend you clean the sand bed once a month or less regularly depending on how often the pool is used. Do not clean the sand too frequently.

0.2

0.4

0.8 1
0.6

5 20

psi bar

1.6

CLEANING THE STRAINER
1. Switch off the sand filter and set the Control Valve to the Closed function. 2. Replace the Debris Screens with Stopper Plugs to prevent water from escaping. 3. Remove the Strainer Cover by unscrewing it. 4. Take out the Strainer, remove any debris. 5. Put the Strainer back into position. Ensure the hole in the strainer is aligned. 6. Ensure the Seal Ring is in place. Secure the Strainer Cover back. 7. Remove the Stopper Plugs and insert the Debris Screens. NOTE: The Strainer must be emptied and cleaned periodically. A dirty or blocked strainer will reduce the performance of the sand filter.

LOWERING OR DRAINING POOL WATER
1. Switch off the sand filter and set Control Valve to the Drain function. 2. Detach the Hose from the pool’s Port A and sand filter Port A and attach to Port D. NOTE: Remember to replace the Debris Screen with Stopper Plug to prevent water from escaping. 3. Switch on the sand filter and press the “RESET” button to run the filter and remove the pool water. WARNING: DO NOT DRY RUN THE SAND FILTER.

STORAGE
In areas that have freezing winter temperatures, pool equipment must be winterized to protect against damage. Allowing water to freeze will damage the sand filter and void warranty. 1. Backwash the sand filter. 2. Drain the pool according to the pool owner’s manual. 3. Disconnect the two Hoses from the pool and the sand filter. 4. Completely pour the sand out of the tank and dry all components. 5. Store the sand filter in a dry location out of child’s reach.

TROUBLESHOOTING

Problems

Probable Causes

Sand Filter does not operate
Sand is flowing to the pool

– GFCI broken
– Sand is too small – Move the control valve from the
backwash to the filter function without stop the sand filter – The level of the sand is too high – The skimmer was broken

No water flow

– Stopper plugs were not removed – Air was not released – The control valve is set to Closed – The strainer is blocked – Sand filter broken

Excessive filter pressure
Control Valve leaks from the port D
Connectors leaks
GFCI LED flash

– Dirty filter – Calcified sand bed – Insufficient backwashing – The pressure gauge was broken
– Control Valve was set between two functions
– The gasket was broken
– O-ring on the hose connection was broken
– Loose Hoses
– Plug may be loose in the socket; the internal metal part of the plug doesn’t guarantee a secure connection

Solutions
– For assistance, please visit the support section on our website, www.bestwayusa.com.
– Recommend 0.45 mm to 0.85 mm #20 silica sand – Stop the sand filter every time set the control valve – Check if the level of the sand is between the
marked “MAX” and ” MIN” on the hub – Replace the skimmer
– Remove the stopper plugs and insert the debris screens
– Release the air – Set to filter function – Clean the strainer – Call for service
– Backwash – Inspect sand and change if necessary – Backwash until effluent runs clear – Replace the pressure gauge
– Set to one function – Replace the gasket
– Replace the o-ring – Tighten them
– Replace the socket – Replace the pump

For support please visit us at:
bestwayusa.com/support
©2022 Bestway Inflatables & Material Corp. All rights reserved Trademarks used in some countries under license from Bestway Inflatables & Material Corp., Shanghai, China Exported by Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong Distributed in North America by Bestway (USA) Inc., 3435 S. McQueen Road, Chandler, AZ 85286, United States of America Tel: +86 21 69135588
www.bestwayusa.com
303021292426