Sun Lounger Frame Box
Product Information: Sun Lounger
The Sun Lounger is a piece of furniture designed for outdoor
use. It consists of a teak wood frame and a cushion, both of which
are packaged separately in boxes. The frame has two short legs and
two wheel legs, which can be attached to the frame using 40mm hex
bolts. The cushion is tied to the frame using metal eyelets.
Product Usage Instructions
Assembly Guide
Before assembling, make sure to have all the necessary
components, including the frame, cushion, legs, bolts, and Allen
wrench. The assembly instructions are divided into different
sections:
1. Components
This section lists all the components that come with the Sun
Lounger, including the frame, cushion, legs, bolts, and Allen
wrench. The items are packaged separately in boxes.
2. Assembly Instructions
This section provides step-by-step instructions for assembling
the Sun Lounger. It includes details on how to connect the legs to
the frame, stand the frame upright, and tie down the cushion.
3. Assembly Tips
This section provides tips to make the assembly process easier
and safer. It recommends assembling on a soft surface, partly
tightening bolts before fully assembling modules, and lifting with
caution.
4. Product Care
This section provides information on how to care for the teak
wood frame. It recommends cleaning it annually or bi-annually with
Golden Teak Cleaner and avoiding prolonging mildew growth by
covering it when not in use.
Assembly Instructions
1. Connect legs to frame
Place the Frame on a soft surface facing down. Using the Allen
wrench provided, fasten the Short Legs and Wheel Legs to the Frame
with two 40mm Hex Bolts per leg. Wheel Legs should be installed on
the same side as the metal eyelets on the frame, as shown in the
picture.
2. Stand upright
Lift and stand Frame upright.
3. Tie down cushions
Place Sun Lounger Cushion on Frame, then secure cushion with
ties to metal eyelets.
4. Complete!
Your Sun Lounger is now ready to use. Relax and enjoy!
Contact
If you have any questions or feedback, please contact us at
[email protected] or visit our website at hineighbor.com.
Sun Lounger
Assembly Guide
02
Components
Assembly Instructions
Contact
Frame Boxes
Sun Lounger Frame (1)
Cushion Boxes
Sun Lounger Cushion (1)
03
Parts
Components
Assembly Instructions
Contact
2X Wheel Leg
Sun Lounger Frame Box
1X Frame
Sun Lounger Frame Box
Cushions
2X Short Leg
Sun Lounger Frame Box
Hardware
8X 40mm Hex Bolt
Sun Lounger Frame Box
Tools
1X Allen Wrench
Sun Lounger Frame Box
1X Sun Lounger Cushion
Sun Lounger Cushion Box
04
Components
Assembly Instructions
Contact
Assembly Tips
Use caution when lifting Two-person lift is recommended. The boxes and product are both large and heavy.
Lay everything out before you begin Getting familiar with all the components before assembly will make for a faster and easier assembly process.
Assemble on a soft surface We recommend assembling your furniture on a soft surface such as a rug or a towel. The wood frame can scratch against harsh textures like brick or concrete.
Loose first, then tight Partly tighten the hex bolts while assembling. After the modules are fully assembled, tighten the bolts firmly. Keep in mind humidity levels can slightly affect how the pieces fit together.
Product Care
Caring for teak Unfinished teak will gradually change color from honey gold to a silver-gray patina. We encourage allowing the teak to turn color naturally and cleaning it annually or bi-annually. As for cleaning, we recommend Golden Teak Cleaner, which is specifically designed to kill mold and mildew spores inside teak.
Avoid prolonging mildew growth. If left in the shade for extended periods, this can be common. If you live in a particularly humid or rainy climate, keep a closer eye on mildew growth and clean as needed.
Caring for Sunbrella Brush off dirt before it becomes embedded in the fabric and wipe up spills as soon as they happen. Rinse thoroughly and air dry. Avoid scrubbing, stiff bristle brushes, or any other abrasive cleaning method. Protect the area around your furniture when using bleach or other chemical solvents that may discolor non-Sunbrella fabrics. If fabric is wrinkled, use an iron on the synthetic setting. As iron temperatures may vary, test a small area first before ironing the entire piece. Do not use a steamer or an iron set to the steam setting.
Fabric stain removal · Blot (don’t rub) liquid spills with a clean, dry
cloth. For oil-based spills, apply an absorbent such as corn starch then remove with a straight edge. · Spray on a mild cleaning solution of soap (such as Woolite® or Dawn®) and water and lightly agitate with a sponge or gentle brush. · Rinse the fabric thoroughly to remove all soap residue. · Air dry. · As needed, unzip and machine-wash covers.
Covering your furniture when not in use will greatly prolong the lifespan of the wood.
05
Components
Assembly Instructions
Contact
8X 40mm Hex Bolt
1
Connect legs to frame
Place the Frame on a soft surface facing down. Using the Allen wrench provide, fasten the Short Legs, and Wheel Legs to the Frame with two 40mm Hex Bolts per leg.
Wheel Legs should be installed on the same side as the metal eyelets on the frame, as shown.
06
Components
Assembly Instructions
Contact
2 Stand upright Lift and stand Frame upright.
07
Components
Assembly Instructions
Contact
3
Tie down cushions
Place Sun Lounger Cushion on Frame, then secure cushion with ties to metal eyelets.
08
Components
Assembly Instructions
Contact
4
Complete!
Relax! Your Sun Lounger is ready to enjoy.
09
Components
Assembly Instructions
Contact
Contact
Have a question, comment, feedback? We love hearing from customers.
[email protected] hineighbor.com
Neighbor Outdoor Furniture | Your living room, outdoors.™
