RAFI ŁÓŻECZKO-003 Rafi Cot Bed
Product Information
The Rafi Cot bed is a versatile and functional piece of
furniture designed for infants and toddlers. It can be used as a
cot for newborns and then transformed into a toddler bed when your
child is ready. The cot bed is made by CuddleCo, a trusted brand
known for its high-quality baby products.
The cot bed comes with all the necessary parts and fittings for
assembly. It is important to follow the assembly instructions
provided in the user manual to ensure proper and safe
installation.
Safety Warnings
Before assembling the cot bed, please read and understand the
safety warnings provided in the user manual. These warnings are
crucial for ensuring the safety of your child while using the
product.
Parts List
- 2x side panels
- 4x corner posts
- 7x slats
- 8x screws (30mm)
- 6x screws (45mm)
- 5x screws (70mm)
- 3x screws (50mm)
- 2x keys (KEY-1)
- 2x keys (KEY-2)
Fittings List
- 4x A fittings
- 4x B fittings
- 12x C fittings
- 4x D fittings
- 8x E fittings
- 8x F fittings
- 2x G fittings
- 2x H fittings
Please note that power tools are not recommended for assembly.
The tools required for assembly are not supplied with the cot
bed.
Product Usage Instructions
- Ensure you have all the necessary parts and fittings listed in
the user manual. - Refer to the assembly steps provided in the user manual.
- Start with Step 1/2, following the diagram and using the
specified screws and fittings. - Proceed to Step 3, repeating the process with the indicated
parts. - Continue with Steps 4, 5, and 6/7, carefully assembling each
component as shown. - Move on to Step 8, following the instructions and using the
specified fittings. - Complete the assembly by following Steps 9/10, 11/12, 13/14,
and 15 in order. - Once the cot bed is fully assembled, ensure all screws are
tightened securely. - Test the stability of the cot bed by gently shaking it. If any
parts feel loose, recheck the assembly and tighten as
necessary. - Ensure that all safety warnings provided in the user manual are
followed during use.
If you have any questions or require further assistance
regarding the product or assembly, please contact CuddleCo Customer
Services at [email protected] or visit their website
at www.cuddleco.co.uk for more information.
1
Rafi Cot bed
Assembly Instructions
IMPORTANT, PLEASE RETAIN FOR FUTURE REFERENCE. PLEASE READ CAREFULLY.
www.cuddleco.co.uk
( 003 ) 17-11-2022
2 Safety Warnings
IMPORTANT! RETAIN FOR FUTURE REFERENCE. READ CAREFULLY
· Your child’s safety is your responsibility · Furniture can be dangerous if incorrectly installed, assembly should be carried out by a
competent person · Follow the instructions in detail to ensure the safety features of the cot are not compromised · Take care when handling or moving furniture. Careless handling can cause damage · Keep children away during assembly as pack contains small parts which may present a choking
hazard · Remove all parts from packaging and check against the parts list · Do not discard any packaging until you are sure you have all parts and the fittings pack · Assembly of the furniture will be easier with 2 people WARNING: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot WARNING: Do not place this child’s bed near heat sources, windows and other furniture WARNING: Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer WARNING: Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords WARNING: Do not use more than one mattress in the cot bed · The lowest bed base position is the safest. To prevent falls the mattress base of this cot should
be adjusted to the lowest position before the child can sit up · The thickness of the mattress shall be such that the internal height (surface of the mattress to the
upper edge of the cot frame) is at least 500 mm in the lowest position of the cot base and at least 200mm in the highest position of the cot base. There is a mark on the inside of the cot which shows the maximum thickness of the mattress to be used with the cot · The cot bed is designed to be used with a mattress measuring 1400mm long by 700mm wide and 100mm tall · The minimum size of the mattress to be used with the cot is 1370mm long by 670mm wide. There shall be no gap more than 30 mm between the mattress and the sides end ends in any position of the mattress. · To prevent injury from falls; when the child is able to climb out of the cot, the cot shall no longer be used by the child. · When converted into a toddler bed the product can be used from 18 months to 4 years · Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed should not be placed too close to other furniture or windows, blind cords, curtain pulls or other strings or cords, and should be placed either tight to any wall or have a gap of 300 mm between the wall and the side of the bed · All assembly fittings should always be tightened properly and fittings should be checked regularly and retightened as necessary · The bed is designed to be dismantled for transportation and storage · Your furniture may be cleaned by wiping down with a damp cloth and dried with a soft, clean cloth. Do not use abrasives, bleach, alcohol or ammonia based household polishes. · The Cot bed is made to conform to safety regulations: BS EN 716-1&2: 2017 and BS 8509: 2008+A1: 2011 CuddleCo Ltd, M16 9HQ, UK CuddleCo Baby Products Europe Ltd, 22 Northumberland Road, Ballsbridge, Dublin 4, Ireland
For questions and advice regarding this product please contact CuddleCo Customer services at: [email protected] or go to www.cuddleco.co.uk
www.cuddleco.co.uk
3 Parts List
1 2X 4
7
8 6
5
3
2 7
6 5
www.cuddleco.co.uk
4 Fittings List
8x30mm
7x70mm
10x50mm
A x 4
6x45mm
B x 4
C x 12
D x 4
E x 8
F x 8
G x 2
H x 2
KEY-1
KEY-2
Power tools not recommended Tools Required: Not supplied
www.cuddleco.co.uk
5 Cot bed Assembly Step-1/2
8x30mm
10x50mm
EE
EE
7
C x 8
E x 8
C
CC
C
6
x8 E
C x8
7x70mm
KEY-1
D x 4
6 5
CC CC
5
EE EE
x2
D
x2
D7
D
www.cuddleco.co.uk
6 Cot bed Assembly Step-3 x4
1
1
www.cuddleco.co.uk
7
8x30mm
Cot bed Assembly Step-4
6x45mm
x2
C x 2
KEY-1
F x 4
C
1
FB
3
B
x4
F
F
F
2
F
www.cuddleco.co.uk
8 Cot bed Assembly Step-5
8x30mm
6x45mm
C x 2
KEY-1
F x 4
3
x4
F
4
x2
1
C
2
www.cuddleco.co.uk
9 Cot bed Assembly Step-6/7
1
2
3
B x 4
B B
3
x4
B
B
2
KEY-1
A x 4
x4 A
A A
B
1
2
A
A
www.cuddleco.co.uk
10 Cot bed Assembly Step-8
KEY-1
x4
1
2 3
www.cuddleco.co.uk
11 Cot bed Assembly Step-9/10
KEY-1
4
3
x8
1
www.cuddleco.co.uk
12 Cot bed Assembly Step-11/12
8x30mm
H x2
C x 2
G x 2
H x 2
CH
x2 C
G 4
x2 G
8
H
3
C
G
8
www.cuddleco.co.uk
13 Cot bed Assembly Step-13/14
6x45mm
KEY-1 KEY-2
F x 2
3
F
x2
6x45mm
KEY-1 KEY-2
F x 2
4
x2
F
www.cuddleco.co.uk
14 Cot bed Assembly Step-15
KEY-1
A x 4
B x 4
x4 3 A
2
2
1B
www.cuddleco.co.uk
15
www.cuddleco.co.uk
CuddleCo
