FLEXIHIRE TP-L4G Laser Tools
Safe Operating Procedure
General Safety Instructions
- Complete pre-start checklist
- Read Manufacturers Operation Manual (www.flexihire.com.au)
- Report any faults or damage to Flexihire 1300FLEXIHIRE
- Do not wear loose clothing or jewellery
- Do not operate equipment near pedestrians or people
- Do not operate without the appropriate PPE as detailed
- Do not operate equipment under the influence of drugs or alcohol
General Electricity Safety
- Ensure all electrical equipment has a current test tag within 3 months
- Do not operate equipment in or around water or damp environments
- it is recommended to use a safety switch to power this equipment
- Ensure the power lead is well stowed and do not present trip hazards
- isolate the power by removing the plug prior to performing any work on the equipment including prior to changing leads or tools or bits
Operating Safety Instructions
| Operators should familiarise themselves with the equipment | Only qualified personnel to perform maintenance and repairs |
| Never operate faulty equipment | Check that the power cord does not create a trip hazard |
| Always turn off tools and disconnect from the power prior to making any tool/blade changes or lead connections | Do not block airflow to machine as it can cause overheating |
| Do not operate under the influence of drugs or alcohol | Do not use power tools in or near water |
| Lasers are Dangerous •Never stare into laser beam •Never point laser at another person •Do not point laser at skin | Ensure the charger has nothing covering it or blocking air flow as it can overheat and burn |
| Place signage in the area where you are working with lasers | |
| Never allow children in the area |
Laser Tools
Risk Assessment
- Assess the immediate work area for any hazards
- Control or eliminate all the risks associated with the hazards
- Hazards to check for that may require risk control-
- Overhead power lines
- Digging
- Working at height
- Falling objects
- Confined space
- Traffic & moving machinery
- Stored energy – air, hydraulic, electricity, pressure
- High Voltage
- Any stored energy
FLEXIHIRE TP-L4G Laser Tools
















