Lipo80 Interior LED Luminaires
Product Information
The product is a luminaire that requires authorized specialists
for installation. The luminaire has a light source that can only be
replaced by the manufacturer, its contractual service technician,
or a similarly qualified person. The manufacturer is not
responsible for the incorrect use and assembly of its products. The
luminaire must not be covered with insulating material.
Specifications
- Model Numbers: 05-200(500)*-**G**
- Length (L): 561mm to 4488mm depending on the
model number - Minimum Distance from Surface (s): 90mm
- Minimum Distance from Lipo80: 50mm
- Minimum Distance from Wall: 200mm
- Maximum Distance from Wall: 30mm
- Power Supply: On/Off with dimming feature
Product Usage Instructions
For proper usage of the luminaire, follow these
instructions:
Installation
The installation must be carried out by authorized specialists
only. Always switch off the power supply before carrying out any
maintenance.
Replacing the Light Source
The light source can only be replaced by the manufacturer, its
contractual service technician, or a similarly qualified
person.
Distance from Surface, Lipo80, and Wall
- The minimum distance from the surface (s) should be 90mm.
- The minimum distance from Lipo80 should be 50mm.
- The minimum distance from the wall should be 200mm.
- The maximum distance from the wall should be 30mm.
Power Supply
The luminaire is equipped with an On/Off power supply with a
dimming feature. To turn the luminaire on or off, use the On/Off
switch. To adjust the brightness, use the dimming feature.
Following these instructions will ensure the proper usage and
maintenance of the luminaire.
93
10 34.5
N
L
min.
ta 25° IP 20
79
Lipo80
Montázní návod Installation instruction Montageanleitung
10
90°
90°
100
100
22.5
L
39.5
3
3
05-500*-**G**
75
Ø 6 mm
a)
Ø 6 mm
05-200(500)*-10G* 05-200(500)*-15G* 05-200(500)*-20G* 05-200(500)*-25G* 05-200(500)*-30G* 05-200(500)*-35G* 05-200(500)*-40G* 05-200(500)*-60G* 05-200(500)*-80G*
L = 561mm L = 842mm L = 1122mm L = 1403mm L = 1683mm L = 1964mm L = 2244mm L = 3366mm L = 4488mm
b)
00-01200,F
c) d)
3cm !
!
e)
OK
OPEN
05-200*(500*)-**G*M(M3)
OPEN
OPEN
N
PE L
On/Off
hndý/brown/braun/
Dim
modrý/blue/blau/ zlutý/yellow/gelb/
bezbarvý/colourless/farblos/ bílý/white/weiß/
05-200*-**G**
!
360°
OK
!
!
! L
!
L
OK
OK
OK
NESAHAT NA LEDKY !
!
DO NOT TOUCH LED ! NICHT BERÜHREN LED !
H LED !
OPEN
OPEN
2
Lipo80
Montázní návod Installation instruction Montageanleitung
min. 50 mm
ta 25° IP 20
10
05-000*-10G* 05-000*-15G* 05-000*-20G* 05-000*-25G* 05-000*-30G* 05-000*-35G*
L = 561mm L = 842mm L = 1122mm L = 1403mm L = 1683mm L = 1964mm
min. 10 mm max. 30 mm
min. 200 mm
s
!
10.5
L
05-000*-40G* L = 2244mm
10.5 05-000*-60G* L = 3366mm
00-00500 – 20Gxx
2x
00-00501 – 40Gxx
05-000*-80G* L = 4488mm
142
Z
s = 90 mm
Z = L + 2 * 3 mm
00-00100
00-00101
Nepekrývat svítidlo izolacním materiálem !
Luminaire must not be covered with insulating material !
Die Leuchte nicht mit Isoliermaterial überdecken !
!
00-01200,F
OK
NESAHAT NA LEDKY ! DO NOT TOUCH LED ! NICHT BERÜHREN LED ! H LED !
!
00-00100
00-00101
!
Svtelný zdroj v tomto svítidle smí vymnit pouze výrobce nebo jeho smluvní servisní technik nebo podobn kvalifikovaná osoba!
The light source in this luminaire may be replaced only by the manufacturer or its contractual service technician or a similarly qualified person!
Die Lichtquelle dieser Leuchte darf nur vom Hersteller oder einem von ihm beauftragten Servicetechniker oder einer vergleichbar qualifizierten Person ersetzt werden.
,
Montáz smí provádt pouze pracovník s odbornou elektrotechnickou kvalifikací. Ped provádním jakékoliv údrzby vypnte pívod el. proudu.
The installation may only be carried by authorised specialist. Always switch-off the power supply before carrying out any maintenance.
Die Leuchtenmontage kann nur von autorisiertem Fachpersonal durchgeführt werden. Vor der beliebigen Wartungausführung die Einspeisung abschalten.
.
Výrobce nenese odpovdnost za nesprávné zacházení s produkty.
The manufacturer is not responsible for the incorrect use and assembly of its products.
1
Der Hersteller trägt keine Verantwortung für eine falsche Verwendung des Produktes. .
125489 v.01/2022
2
