375 Side Covers
Product Information
The product is a set of side covers for a motorcycle,
specifically designed for model 375. The package includes the
following parts:
- Side Cover Left Side – 1 piece
- Side Cover Right Side – 1 piece
- Rubber Accent Left Side – 1 piece
- Rubber Accent Right Side – 1 piece
- Adhesive Promoter (Primer) – 2 bottles
The side covers are made of high-quality materials and are
designed to enhance the appearance of the motorcycle while
providing protection to certain components.
Product Usage Instructions
- Park your motorcycle on a level surface and turn off the
engine. - Clean the mounting surface where the side covers will be
installed using hot water and soap. Make sure to remove all dirt
and debris.WARNING: Ignoring these instructions may result
in potential serious injury, death, or material damage. - Apply the adhesion promoter to the left and right side mounting
locations as per the instructions on its container. - Remove the red adhesive backing from the side covers and
carefully install them on the mounting surface. Press the covers
firmly onto the surface for 60 seconds to ensure proper adhesion.
Note that the adhesive will cure within 24 hours. - If desired, attach the rubber accents to each cover for
additional style.
Limited Warranty:
The product is warranted to be free of defects in material and
workmanship for a period of 1 (one) year from the date of purchase.
To claim warranty service, the customer must provide proof of
purchase. Please note that Twinart shall not be liable for any
consequential and incidental damages. The product must be installed
properly and operated under normal conditions.
For more information, please visit www.twinartasia.com.
I N S T A L L A T I O N
SIDE COVERS – 375
Parts included: SIDE COVER LEFT SIDE ————————— 1 SIDE COVER RIGHT SIDE ————————-1 RUBBER ACCENT LEFT SIDE ————–1 RUBBER ACCENT RIGHT SIDE ———–1 ADHESIVE PROMOTER(PRIMER) —– 2
1. Park on a level surface and shut off the motorcycle.
2. Clean the mounting surface with hot water and soap to remove all dirt and debris.
WARNING:
Ignoring the instruction may result in potential serious injury, death or material damage.
3. ATTENTION: Thoroughly clean the mounting surface with denatured alcohol to remove all wax, oil, and residue. *NOTE: Do not install if the temperature is below 50° F. The adhesive will not cure properly.
4. Apply the adhesion promoter according to the instruction on its container onto left and right side mounting locations.
5. Remove the red adhesive backing and install the covers. Press the covers firmly onto the surface for 60 seconds. The adhesive cures within 24 hours.
6. Attach rubber accents to each covers if prefer.
Limited Warranty:
Products are warranted to be free of defects in material and workmanship for 1 (one) year from date of purchase by the consumer.
Customer must show proof of purchase for warranty.
Twinart shall not be liable for any consequential and incidental damages.
The products must be installed properly and operated under normal conditions.
TWINARTASIA.COM
트윈아트 TWINART DISTRIBUTION
