Disney 23sv24034 Led Jack Skellington Instruction Manual

23SV24034 LED Jack Skellington

Video assembly instructions available online
EASY ASSEMBLY AND OPERATION INSTRUCTIONS 23SV24034 LED Jack Skellington
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

USA/ États-Unis 1009198762 Canada 1001786203
ASSEMBLY REQUIRES AT LEAST 2 ADULTS. PLEASE FOLLOW THE STEP BY STEP GUIDE AND ENJOY LED JACK SKELLINGTON! IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT SVI CUSTOMER SERVICE FROM 8:30AM TO 5:30PM PST AT 1-855-428-3921, EMAIL [email protected], OR CALL HOME DEPOT CUSTOMER SERVICE FROM MON-FRI 8:00AM TO 7:00PM AND SAT 9:00 AM TO 6:00 PM EST AT 1-877-527-0313.

IMPORTANT TIPS:

· Ensure that the item’s adapter is plugged in at the Function Control Box and in

· Ensure that the volume is not all the way down.

the wall.

· Be sure nothing is blocking the sensor.

· ·

ET·IfnERnsnsOuuorrUteetBfhtuahLtnatcEhtetStiiotheHnemi’OnssgawOdaiTptpctIrehoNr pisoGepnr:lultyghgee(defixnu:antLcthtEeioDFnusnccdtoioonnntC’rotonltlriobglohBxotxiuasnpdo)in,n

the desired tehenwsaullr.e that

setting. cables

are

· If the item still does not work, contact SVI Customer Service from 8:30am to 5:30pm PST at 1-855-428-3921, email [email protected], or call

c··oEInfnnnsouetrcefuttnhecadttiotnhtoiengstwphirteocphireorclnyot(herexr:efuMsnocputiotohnnddcooeinnstngr’otlcmbaooxvbeisl,eeoynaetsshdesodnhe’tsoilriwgehdntsueiptnt,inbtgoh.dyedionessnt’rtumcotvieo),nensshureeethta.t cables are connected to their correspHonodmingecaDblee pasosthoCwunsintothme iensrtrSucetirovnischeeeft.rom Mon-Fri 8:00am to 7:00pm and Sat 9:00

· B· eBessuurreenonthointghiisnbglociskinbglomcovkeimnegntmorocavuegmht einnmtoovinrgcpaarutsg.ht in moving parts. · E·· nEBnessusuurrreeetnhtoahtthatihntegtfihlsoeobrlofoclroksionugrrfatohceerstsheanutsrotfhra.eciteemtshitastonthiseflaitteanmd lesvietls. on is flat and level.

am To 6:00 pm EST at 1-877-527-0313.

· Ensure that the volume is not all the way down.

· If the item still does not work, contact SVI customer service from 8:30am to 5:30pm pst at 1-855-428-3921, email [email protected], or call HOME DEPOT customer service at 1-877-527-0313.

PARTS LIST
A. Right Base Half x 1 B. Left Base Half x 1 C. Shoes x 2 D. Lower Left Pole x 1 E. Lower Right Pole x 1 F. Left Pole x 1 G. Right Pole x 1 H. Costume x 1 I. Hip Frame x 1 J. Hip Hoop x 1 K. Chest Frame x 1 L. Arms x 2 M. Bow Tie x 1 N. Left Hand x 1 O. Right Hand x 1 P. Head x 1 Q. Scary Eye Set x 1 R. Tether Cable x 1 S. Base Extensions x 4 T. Stakes x 4 U. Adapter * x 1 * Power Adapter Spec Input: 120VAC 50/60Hz Output: 5.9V 2.0A

A

B

K

I

C

D

E

F

G H

J

L

M

N

O

P

Q

T

U

R

S

NOTE: Throughout the instructions, Right and Left are from the character’s point of view.
LEFT
Locking Pin
B
Click
Means It’s Locked

BACK FRONT

A

RIGHT

1.1

A C

©Disney

E

D

B A

C B 1.2
1.3

NOTE: Connect the cable

from the top of the (D)

Lower Left Pole to the

corresponding cable

G

available from the (F) Left

Pole.

NOTE: When connect-

ing cables, ensure that

F

the arrow indicators on

each cable end are

lined up with and

pointing at each other. There is also a

groove and a rod like protrusion by

these arrows that fit into each other.

Then firmly press the cables together.

Rotate the cable cap clockwise onto

the threading of the corresponding

E

D

cable until firmly in place.

2. 1
NOTE: Have someone hold the back of the (A) Base steady while others assemble LED Jack Skellington. The (A, B) Base should be held steady until it is set upright in Step 8.1.

Outer Box
2.2

1/5

NOTE: Connect the cable available from the bottom of the left pant leg of the (H)
D
Costume to the corresponding cable available from the function control box at the bottom of the (D) Lower Left Pole.

H I

D

A B

NOTE: Make sure that the (H)

Costume is facing

the correct way

with the tails of the tailcoat aimed

towards the back and the white

undershirt towards the front.
3. 1

1

2

3

K

NOTE: Connect the cable available from the top of the (F) Left Pole to the corresponding cable available at the bottom of the (K) Chest Frame.

NOTE: Slide the (L) Arms up each

sleeve of the (H) Costume before

K

attaching to the (K) Chest Frame.

G F

K J

Locking Pin
Click
Means It’s Locked

3.2

3.3

I 4.1
L 4.2

NOTE: Slide the (L) Arms

1

NOTE: Connect the cable available from the top of the (K)

K

up each sleeve of the (H)

Costume before attaching

Chest Frame to the corresponding cable available from the (M)

M

Bow Tie. Rotate the cable cap clockwise onto the threading of

to the (K) Chest Frame.

the corresponding cable until firmly in place.

Locking Pin

2

K

H

Click
M
L

Means It’s Locked

3

K
H M

5.1

CAUTION: Cable may have

sharp ends, use caution when

assembling. If cable cannot

reach, the upper body of LED

K

Jack Skellington needs to be

H

lifted up from the box but still in

R

a laying position. This should

enable the cable to reach.

H

6.1
NOTE: The (N, O) Hands can be oriented either palm up or palm down according to personal preference.
L

©Disney

N H

5.2

N

6.2
2/5

H

L H

O

O

7.1
NOTE: The eye set on the (P) Head can be removed and replaced with the (Q) Scary Eye Set. Adjust to personal preference.

P

Q Q
7.2

K

K

P

P

NOTE: Connect the cable

available from the top of the

(K) Chest Frame to the

corresponding cable available

from the bottom of the (P)

Head.

8.1

8.2

©Disney

H
9.1
NOTE: It is strongly recommended that 2 adults assist with lifting up LED Jack Skellington.
9.2

S S

S

A

B

S 10.1

T T
A

T T
B

10.2
3/5

LED JACK SKELLINGTON IS NOW FULLY ASSEMBLED. PLUG IN AND TURN ON TO LET THE FUN BEGIN!

If your application requires additional stability, add weights on top of the base (for example sand bags ­ not included).

IR SENSOR Be sure nothing is blocking the sensor.

©Disney

©Disney ©Disney

11.1

ADAPTER

U

OPERATION INSTRUCTIONS:

The LED Jack Skellington is powered by an adapter. Plug in the power adapter into a standard power outlet. To turn on LED Jack Skellington, press the button on the Function Control Box. Press the button again to switch to the Timer setting. Press the button a third time time to switch to the Sensor Setting. Press the button a fourth time to turn the item Off.

The item is activated by pressing the button on the Function Control Box and has the following settings:

LIGHTS ONLY /ÉCLAIRAGE UNIQUEMENT

This switch mode will activate the lights of the item. This switch mode does not have any animation or sound.

TIMER /MINUTEUR

Timer begins daily cycles of LIGHTS ONLY for 6hrs, then ALL functions off for 18hrs. LED Jack Skellington does not speak or move on Timer setting.

SENSOR /DÉTECTEUR

This switch mode will activate lights, sound, and animation when the Infra-red (IR) sensor is activated and will operate for 1 audio-cycle with each activation. The Infra-red (IR) sensor has a range of up to 2 m/6.5 ft. and will activate when someone comes within an 80-degree angle from left-to-right, as well as from above and below. LED Jack Skellington speaks and moves only when the control box is set to “SENSOR” and the sensor is activated. Between activations, LED Jack Skellington’s LEDs will remain on.

OFF · TRY ME /ARRÊT · ESSAIE-MOI

This setting will deactivate the lights, sound, and animation of the item. This mode also allows the item to be activated if triggered by using a Step Here Try Me Activation Pad (Not Included). The item will operate for one audio cycle with each Try Me activation.

Raise or lower the volume using the volume control turn dial, turn all the way down to turn the volume off .

THE LED JACK SKELLINGTON IS COMPATIBLE WITH EXTERNAL TIMERS AND PRESERVES ITS SETTING WHEN THE POWER IS TURNED OFF/ON.

NOTE: Make sure the waterproof cap is covering the Try Me receiver at all times when not in use.

4/5

WARNING:
· Lay product down before a storm or strong winds. · Don’t climb or pull on product. · Don’t add to or modify product. · Assemble and place the product on level surfaces only. · Don’t push or tilt product.
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children. 1. Please use the adapter supplied by manufacturer. 2. Please assemble item according to instructions. Connect all wires according to matching color. 3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep flammables away from the adapter, as it heats up during operation. Please view all instructions carefully before assembling. Save this instruction sheet for future reference.
CARE AND STORAGE INSTRUCTIONS
When not in use, store this product in its original packing. Keep away from heat and moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna, Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or experienced radio/TV technician for help. CAN ICES-003(B)/NMB-003(B)

USE WEIGHTS ON THE BASE

1-877-527-0313
CONTACT US IF LEDS DON’T WORK

©Disney

© Seasonal Visions International Berkeley, CA 94710
Tel: 1-855-428-3921 All Rights Reserved MADE IN CHINA

© Seasonal Visions International

San Diego, CA 92101

Tel: 1-855-428-3921

All Rights Reserved MADE IN CHINA

5/5