Contemporary Lighting E20369 Half Moon LED Wall Sconce
Instruction Manual
E20369 Half Moon LED Wall Sconce
ITEM NUMBER: E20369
DESCRIPTION: Half Moon LED Wall Sconce
PLEASE CONSULT AN ELECTRICIAN BEFORE INSTALLATION
LAMPING: 1 X E26 Medium-9W ( Bulb included )
V input: 120V 60Hz
Made in China
Before Getting Started
- Read the instructions carefully prior to assembling the product.
- When you open the package with a sharp tool like a cutter knife, be careful not to damage the components inside.
- Carefully remove all packaging materials and retain them for future use.
- Keep all hardware parts and packaging out of reach of small children.
- Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
- Ensure that you have all the required contents for complete assembly.
- Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
- Do not over-tighten the screws and bolts as this may damage the threads.
- Do not let children play with this product.
Risk of suffocation! Keep any packaging materials away from children.
GENERAL Lighting Instructions
- Carefully read through the instruction sheet before assembly and using the product.
- Caution there is a risk of shock. Disconnect from the power source before assembling or cleaning.
- Switch off, unplug and allow the bulb to cool before replacing the bulb or cleaning.
- Only use the recommended bulb type and do not exceed the maximum wattage as it could cause a fire. Do not plug the product in if the cord is torn or frayed.
Cleaning & Maintenance
- On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
- For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
- Clean with a soft cloth and mild detergent. Do not use abrasive cleaner.
- Periodically (every 90 days) make sure that the screws are fully tightened.
- Prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause the color to fade.
Contents
Before getting, started, ensure the package contains the following components:
| A |  Fixture | Χ 1 |
| B |  EGLS20361-92-JH | Χ 1 |
| C |  Screw PM4 x L10 | Χ 2 |
| D |  Bracket | Χ 1 |
| E |  MACHINE SCREWS 8/32 x 1’L | Χ 3 |
| F |  Wiring Nuts | Χ 2 |
