Untitled Kyp1300 Alarm Keypad User Guide (+ PDF)

Green LED: Normal on when power is on
Blue LED: Flashes once for Arm/Stay or Disarm
Red LED: Flashes once for wrong programming, every 3 seconds
for low battery indication
Wake Up Key, Arm, Arm in Stay Mode, Disarm, SOS Key, Battery
Slot
Wired Cables Interface, Tamper Switch, Screw Hole, Rear
Cover

Product Usage Instructions

Step 1: Assemble your device and accessories

Unpack your device and accessories.
Pair the device with the Security Shuttle within 1-10 feet to
ensure a working connection.
Pull and remove the plastic strip to initiate battery
contact.

Step 2: Add a device

Open the app and tap on the menu button then select Device
Management.
Press the add button next to Sensor List.
Follow the app instructions to scan the QR code located on the
device. If the scan is incomplete, enter the serial number (SN) of
the device.

Step 3: Mount your device

Before mounting, ensure your device is within Security Shuttle’s
range.

Take your device to the desired room.
Press then SOS
for 3 seconds. If you receive a notification saying “Emergency,”
you are within range.

Installation

Open the keypad case and fix the rear cover at the suitable
mounting location.
Fasten the front cover on the rear cover.
Screw the bottom on.

Operation

To activate the keypad, enter the admin password # or user
password # before operating.

Arm: Press 1234 #
Arm in Stay: Press 1234 #
Disarm: Press 1234 #
Mute: Press #, then press within 1 second to
enter Siren Delay – No Siren – Exclude Emergency Events mode.
Unmute: Press #, then press within 1 second to
cancel Siren Delay mode.
SOS: Press SOS for 3 seconds to activate an
immediate Emergency Call alarm.

Settings

To enter the setting state, press then enter admin password # 9. Blue LED will
light up. Then insert your command.

Quick Arm On: Press 1 #
Quick Arm Off: Press 2 #
Touch Tone On: Press 2 #
Touch Tone Off: Press 4 #
Emergency Call with Password: Press 4 #
Emergency Call without Password: Press new password
#
Change Admin Password: Press new password
#
Change User Password: Press 6 digits new password
#
Arm Delay: Press 0-99s #

Troubleshooting Tips

If your devices are not listed in the app, follow the
instructions to add any missing devices.

View Fullscreen

ADD-ON DEVICE Quickstart Guide

Alarm Keypad
Model No. KYP1300

What’s inside:

1x Alarm Keypad

2x Double-Sided Tapes

Mounting Accessories

Broadband internet connection, iOS or Android phone and home router required.

English

Get to Know Your Device

6 7 10

8 11

1 . Green LED

Normal On :
Power on 13
2. Blue LED

Flashes Once :

Arm / Stay or Disarm

3. Red LED Flashes Once : Wrong programming
Flashes Once Every 3 Seconds : Low battery indication, please replace the batteries.

4. Wake Up Key 5. Arm 6. Arm in Stay Mode 7. Disarm 8. SOS Key 9. Battery Slot

10. Wired Cables Interface 11 . Tamper Switch
The tamper switch will be activated if case is opened 12. Screw Hole 13. Rear Cover 14. Wired Cables Interface

English

Step 1: Assemble your device and accessories
1 . Unpack your device and accessories. 2. Pair the device with the Security Shuttle within 1-10 feet to
make sure the connection is working well. 3. Pull and remove the plastic strip to initiate battery contact.
1-10 ft
Step 2: Add a device
1 . Open the app, tap on the menu button ” ” and select “Device Management”.
2. Press the add button ” + ” next to Sensor List. 3. Follow the app instructions to scan the QR code located on the
device. Note: If the scan is incomplete, you will be asked to enter the serial number (SN) of the device.

English

Step 3: Mount your device
Before you mount your device, see if it’s within Security Shuttle’s range.
1 . Take your device to the room you want to use it in. 2. Press ” ” then ” SOS ” for 3 seconds, if you receive an
notification saying ” Emergency “, you are within range.

Installation
1

Open the keypad case, fix the rear cover at the suitable mouting location.

2
Fasten the front cover on the rear cover.

English

3
Screw the bottom on.

Operation
Press ” ” to activate keypad then enter admin password # or user password # before operating.
+ admin password / user password + #
· Admin password is 123456 as default · User password is 1234 as default Note: If there is no operations within 5 seconds after pressing ” “, keypad will exit setup state automatically.

Function Arm
Arm in Stay Disarm

Press Button

Press

+ 1234 +

Press

+ 1234 +

Press

+ 1234 +

English

Function Mute

Press Button
Press button, then press within 1 second to enter Siren Delay – “No Siren – Exclude Emergency Events” mode.

Unmute

Press button, then press cancel Siren Delay mode.

within 1 second to

SOS

Press SOS for 3 seconds to activate an immidate

Emergency Call alarm.

Note: It is recommended to enable function of “Emergency Call with Password” to avoid false operation. See Settings.

Settings
Press ” ” then enter admin password # 9 to enter setting state. Blue LED will light up. Then insert your command.

admin password

+# +9

· Admin password is 123456 as default. · Keypad will be programmed successfully after one beep is
heard.
Note: No operation within 30 seconds, keypad will automatically exit setup state.

English

Function
Quick Arm On
Quick Arm Off
Touch Tone On

Press Button 1#

Mark
Once enabled, users can press ” + ” to arm the system without password.

Touch Tone Off

Once enabled, the green LED will flash when a button is pressed.

Emergency Call with Password
Emergency Call without Password
Change Admin Password
Change User Password

new password

Arm Delay

0-99s #

6 digits 4 digits (0-99s)

Troubleshooting Tips
Are your devices listed in your app?
If you’re having trouble installing your devices, see if they’re listed in your app: · Navigate to > Device Management to see if all your devices are
listed. · Tap + next to the device category and follow the on-screen
instructions to add any missing devices.
Are your devices communicating with Security Shuttle?
· If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s closer to Security Shuttle and try again.
· If they do connect, you’ll know the range of your device and where to install a range extender.
· Alternatively, you can move Security Shuttle closer to your device. · If your devices still don’t communicate with Security Shuttle,
even when they’re in the same room, navigate to > Device Management > + on the app to add your devices again.
Reset to Default Settings
Press the Tamper Switch 5 times in a row, then you will heard one long beep.
FCC STATEMENT 1 . This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

99200307MIG

V1.0