Iviga Faucet Bathroom Towel Bar Toilet Paper Holder Kit Instruction Manual

Faucet Bathroom Towel Bar Toilet Paper Holder Kit

Product Information

ProductTechnical Specifications
Towel BarLength: 24 inches (609 mm)
Extension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Recommended Mounting Surface: Stud or concrete
Usage: Not intended for use as a grab bar or support bar
Cleaning: Use a soft damp cloth, do not use commercial or abrasive
cleaners
Single Robe HookExtension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Usage: Not intended for use as a grab bar or support bar
Towel RingExtension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Usage: Not intended for use as a grab bar or support bar
Tissue HolderLength: 6 inches (152 mm)
Extension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Usage: Not intended for use as a grab bar or support bar

Product Usage Instructions

How To Install Towel Bar

  1. Slide the extension of the towel bar kit onto the bracket.
  2. Orient the screw hole of the extension downwards.
  3. Tighten the screw with the hex wrench to secure the towel bar
    kit.

How To Install Single Robe Hook

  1. Slide the single robe hook onto the bracket.
  2. Orient the screw hole of the hook downwards.
  3. Tighten the screw with the hex wrench to secure the single robe
    hook.

How To Install Towel Ring

  1. Slide the towel ring onto the bracket.
  2. Orient the screw hole of the towel ring downwards.
  3. Tighten the screw with the hex wrench to secure the towel
    ring.

How To Install Tissue Holder

  1. Slide the toilet tissue holder onto the bracket.
  2. Orient the screw hole of the holder downwards.
  3. Tighten the screw with the hex wrench to secure the toilet
    tissue holder.

Technical Specification

NOTE:
These products should be located and mounted to a wall. While it is possible to mount them to any surface, a stud or concrete mounted product will yield the best results.
DANGER:(Risk of personal injury)
These products are not designed or intended for use as a grab bar or support bar. Do not install any of these products in any area where they are likely tColebaenuinsegdIninsatrduvcetirotenns:rly as a grab bar or support bar. To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.
How To Install Towel Bar
26″(660)
24″(609)

0.8″(21)

2.7″(68)

Ø1.8″(45)

24″ Towel Bar

14″(355) 12″(305)

11″(279) 9″(229)

2.7″(68)

2.7″(68)

Ø1.8″(45)
12″ Towel Bar

Ø1.8″(45)
9″ Towel Bar

Slide the extension of the towel bar kit onto the bracket . Orient the screw hole of the extension downwards. Tighten the screw with the hex wrench to secure the towel bar kit .

How To Install Singe Robe Hook

2.1″(54.5) Ø1.8″(45) 0.8″(21)

2.7″(68)

unit:inch(mm)
Slide the singe robe hook onto thebracket . Orient the screw hole of thehook downwards. Tighten the screw with the hex wrench to secure the singerobe hook. How To Install Towel Ring
2.7″(68)

Ø1.8″(45) 0.8″(21)

Ø6.9″(175)

unit:inch(mm)

Slide the towel ring onto the bracket . Orient the screw hole of the towel ring downwards. Tighten the screw with the hex wrench to secure the towel ring .
How To Install Tissue Holder
2.7″(68)

2.4″(60) Ø1.8″(45) 0.8″(21)

6″(152)
Slide the toilet tissue holder onto the bracket . Orient the screw hole of the holder downwards . Tighten the screw with the hex wrench to secure the toilet tissue holder.

unit:inch(mm)

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals