HM61R V2.0 WW Headlamp
Product Information
| Product Name | FENIX HM61R V2.0 WW HEADLAMP |
|---|---|
| Maximum Output | 950 lumens |
| Maximum Runtime | 300 hours |
| Light Modes | Turbo, High, Eco, Med, Low, Red Flash |
| Battery Type | Fenix ARB-L18 Series (18650 Li-ion) or CR123A |
| Battery Level Indication | Green light (100% – 85%), Green light flashes (85% – 50%), Red light (50% – 25%), Red light flashes (25% – 1%) |
Product Usage Instructions
Switching Light Modes:
Press and hold the switch for 0.5 seconds to enter white light
mode.
Double click the switch to enter red light mode.
White Light Mode:
| Output | Lumens |
|---|---|
| Turbo | 950 |
| High | 600 |
| Med | 150 |
| Low | 50 |
| Eco | 5 |
Red Light Mode:
| Output | Lumens |
|---|---|
| Med | 5 |
| Low | 5 |
Battery Replacement:
Unscrew the cap to insert the battery with the anode side (+)
towards the inside, then screw the cap back on.
Charging:
- Connect the USB port of the charging cable to the power
source. - Hold the magnetic end of the charging cable close to the
charging port of the headlamp.
Battery Level Warning:
When the voltage level drops below the preset level, the
headlamp will downshift to a lower brightness level until Low
output is reached. In Low output mode, the lamp will blink 3 times
every 10 minutes to remind you to recharge or replace the
battery.
61.149.221.075- HM61R V2.0 WW /105G//24196*225mm/A4
HM61R V2.0 WW
|
950 LUMENS MAXIMUM OUTPUT
300 HOURS MAXIMUM RUNTIME
Turbo
High
Eco
Med
Low
Switch
Press and hold the switch for 0.5 seconds
to enter white light mode
Red Flash
Low
Med
Double click the switch
to enter red light mode
Output:Lumens
1000 500 100 50 10
0
1
2
5
10
Battery replacement Magnetic charging
White Light Turbo High Med Low Eco
Red Light Med Low
Runtime:Hours
50
100
300
LIGHTING FOR EXTREMES
“Follow” us for more information about Fenix.
FENIXLIGHT LIMITED
Tel: +86-755-29631163/83/93 Fax: +86-755-29631181
E-mail: [email protected] Web: www.fenixlight.com
Address: 2F/3F, West of Building A, Xinghong Technology Park, 111 Shuiku Road, Fenghuanggang Community, Xixiang Street, Bao’an District, Shenzhen City, Guangdong Province, China
61.149.221.075-A4-20230327
! WARNING
Do place this headlamp out of the reach of children! Do NOT shine the headlamp directly into the eyes of anyone! Do NOT shine flammable objects at close range, to avoid burning objects or causing danger due to high temperature! Do NOT use the headlamp in inappropriate ways such as biting in the mouth, to avoid personal injury or life threats when the headlamp or internal battery fails! This headlamp will accumulate a lot of heat while working, resulting in a high temperature of the headlamp shell. Pay attention to safe use to avoid scalding. Turn off and lock the headlamp or remove the battery from the headlamp to prevent accidental activation when the headlamp is placed in a closed and flammable environment such as pockets and backpacks! The LED of this headlamp is not replaceable; so the whole headlamp should be replaced when the LED reaches the end of its life.
(ENGLISH)FENIX HM61R V2.0 WW HEADLAMP
950 lumens maximum output and 117 meters maximum beam distance. CREE XM-L2 warm white light and 2835 red LEDs, with a lifespan of 50,000 hours. Included a 3400mAh battery and is compatible with 2 x CR123A cold-resistant batteries. Simple operation with a large side switch. The detachable lamp can be used as a flashlight or a chest light. Magnetic charging, battery level indication and charging indication. Digitally regulated circuit for maintaining a stable output. Intelligent memory circuit recalls the previously used brightness level. Made of durable A6061-T6 aluminum. Premium type HAIII hard-anodized anti-abrasive finish. Size: 3.98” x 1.81” x 1.42” / 101 x 46 x 36 mm. Weight: 5.36 oz / 152 grams (including battery and headband).
OPERATING INSTRUCTION
On/off On: With the lamp switched off, press and hold the side switch for 0.5 seconds to enter white light mode; double click the side switch to enter red light mode. Off: With the lamp switched on, press and hold the side switch for 0.5 seconds to turn off the lamp. Output Selection In white light mode, single click the side switch to cycle through EcoLowMed HighTurbo. In red light mode, single click the side switch to cycle through Red LowRed Med Red Flash. Mode Switching With the lamp switched on, press and hold the side switch for 1.2 seconds to select white or red mode. Lock/Unlock Lock: when the lamp is switched off, press and hold the switch for 3 seconds, the lamp will blink red 4 times to indicate locked status. Unlock: when the lamp is locked, press and hold the switch for 3 seconds, the lamp will be activated with 4 one-second red blinks and activated on Red Low. In locked status, clicking or pressing the switches will activate 4 one-second red blinks to indicate locked status. Intelligent Memory Circuit The headlamp memorizes the last selected output in white light mode. When turned on again the previously used output will be recalled. Each time the Red Light mode is
TECHNICAL PARAMETERS
ANSI/PLATO FL1
TURBO
HIGH
WHITE LIGHT MED
LOW
ECO
LOW
RED LIGHT
MED
STROBE
OUTPUT
950 lumens 600 lumens 150 lumens 50 lumens 5 lumens
1 lumen
5 lumens
5 lumens
RUNTIME
2 Hours*
3 hours
11 hours
32 hours 300 hours 400 hours 80 hours 160 hours
DISTANCE
117 meters 89 meters 44 meters 26 meters 8 meters
/
/
/
INTENSITY
3433 candela 1975 candela 484 candela 163 candela 16 candela
/
/
/
IMPACT RESISTANCE
2 meters
SUBMERSIBLE
IP68
Note: According to the ANSI/PLATO FL1 standard, the above spe+cifications are from the results produced by Fenix through its laboratory testing using one Fenix ARB-L18-3400 battery under the temperature of 21±3°C and humidity of 50% – 80%. The true performance of this product may vary according to different working environments and the actual battery used.
*The Turbo output is measured in a total of runtime including output at reduced levels due to temperature or protection mechanism in the design.
entered with Red Low * The lamp is reentered with White High mode if it is previously switched off on Turbo mode.
BATTERY SPECIFICATIONS
Type
Dimensions
Nominal Voltage
Usability
Fenix ARB-L18 Series
Non-rechargeable Battery (Lithium)
18650 3.6V / 3.7V Recommended
CR123A
3V
Usable
Warning: Do not mix batteries of different brands, sizes, capacities or types. Doing so may cause damage to the headlamp or the batteries being used. *18650 Li-ion batteries are powerful cells designed for commercial applications and must be treated with caution and handled with care. Only use quality batteries with circuit protection will reduce the potential for combustion or explosion; but cell damage or short circuiting are potential risks the user assumes.
charging cable will attach to the charging port automatically and charging will begin. 2.The indicator will display red while charging and will turn green when fully charged. 3.When charging, the Eco, Low, Med of white light mode, and all red light modes can be used, but charging time will be prolonged 4.The normal charging time of the Fenix ARB-L18-3400 battery is 4 hours from depletion to full charging. Note: 1.The headlamp has a charging protection function. It will automatically end charging and indicating when the detected temperature is higher than 65°C. 2.Recharge a stored headlamp every four months to maintain optimal battery performance.
BATTERY LEVEL INDICATION
With the lamp switched off, single click the switch to check the battery status, the indicator will last for 3 seconds. Green light on: saturated 100% – 85% Green light flashes: sufficient 85% – 50% Red light on: poor 50% – 25% Red light flashes: critical 25% – 1% Note: This only works with Fenix ARB-L18 Series battery.
BATTERY REPLACEMENT
Unscrew the cap to insert the battery with the anode side (+) towards the inside, then screw the cap back on.
CHARGING
1.Connect the USB port of the charging cable to the power source, then hold the magnetic end of the charging cable close to the charging port of the headlamp. The
LOW-VOLTAGE WARNING
When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Low output is reached. When this happens in Low output mode, the lamp blinks 3 times every 10 minutes to remind you to timely recharge or replace the battery. Note: This only works with Fenix ARB-L18 Series battery.
INTELLIGENT OVERHEAT PROTECTION
The lamp will accumulate a lot of heat when used on High or Turbo modes for extended periods. When the lamp reaches a temperature of 65°C or above, the lamp will automatically step down a few lumens to reduce the temperature. When the temperature drops below 65°C, it will then allow the user the reselection of High or Turbo modes.
HEADBAND ASSEMBLY
The headband is factory assembled by default. Adjust the headband by sliding the buckle to the required length. Assemble the top headband to better fix the headlamp. First fix the headband mount to the headband, then fix one side of the top headband to the headlamp holder, and the other end to the top headband mount.
OTHER USES
Flashlight: Detach the lamp from the holder, it can be used as a flashlight. Chest light/Work light: With the detachable body clip, it can be used as a chest/work light.
USAGE AND MAINTENANCE
Disassembling the sealed head can cause damage to the lamp and will void the warranty. Fenix recommends using an excellent quality Fenix 18650 battery. If the lamp will not be used for an extended period, remove the battery, or the lamp could be damaged by electrolyte leakage. Lock the lamp or take out the battery to prevent accidental activation during storage or transportation. Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare Periodic cleaning of the battery contacts improves the lamp’s performance as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:
A: The battery needs replacing. Solution: Replace the battery (Ensure the battery is inserted according to the
manufacturer’s specifications). B: The contact point or contact of the battery or headlamp is dirty. Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don’t work, please contact the distributor.
INCLUDED
Fenix HM61R V2.0 WW headlamp, Fenix ARB-L18-3400 battery, Magnetic charging Spare O-ring, User manual, Warranty card
!
()Fenix HM61R V2.0 WW
950117 CREE XM-L22835LED50000 13400mAh2CR123A A6061-T6 HAIII 101 × 45 × 36 152
/ 0.5 0.5
1.2
34 34
ANSI/PLATO FL1
950 ( 9.5 ) 600( 6 ) 150( 1.5 ) 50( 0.5 ) 5( 0.1 ) 1( 0.02 ) 5( 0.1 ) 5( 0.1 )
2*
3
11
32
300
400
80
160
117
89
44
26
8
/
/
/
3433 1975 484 163 16
/
/
/
2
IP68
1Fenix ARB-L18-340021±350%-80%Fenix *
4
0.5 *
Fenix ARB-L18 Series
18650 3.6V / 3.7V
Non-rechargeable Battery
(Lithium)
CR123A
3V
*
*18650
1.USB-A 2. 3. 4.4 565 6
3 85% 85%-50% 50%-25% 25% *Fenix ARB-L18
10 3 *Fenix ARB-L18
65 65
0.5/ 3 /
Fenix HM61R V2.0 WW , Fenix ARB-L18-3400 , , ,
! !
! – ! , ! , ! , . , . , , – . ; .
(RUSSIAN) FENIX HM61R V2.0 WW
950 , 117 . CREE XM-L2 50 000 . 3 4 0 0 * 2 x C R 1 2 3 A . . . , . . . A6061-T6. – HAIII. : 101 x 46x 36 3.98” x 1.81” x 1.42” : 152 5.36 ( ).
: 0.5 , 2 . : 0.5 . EcoLowMedHighTurbo. Low Med . 1.2 . () : 3 , 4 , . : 3 , 4 1 . 4 , . . .
ANSI/PLATO FL1
TURBO
HIGH
MED
LOW
ECO
LOW
MED
950 2 * 117
3433
600 3 89
1975
150 11 44
484
50
5
32
300
26
8
163
16
2
IP68
1 400
/ /
5 80
/ /
5 160
/ /
: ANSI/PLATO FL1 , Fenix – Fenix ARB-L18-3400 21±3°C 50% – 80%.
* Turbo , , – .
* Turbo , High .
Fenix ARB-L18 Series 18650
3.6V / 3.7V
Li-Ion
( ) CR123A
3V
: , , . . *- 18650 – , , . , ; , .
. .
1. USB- . , . 2. . 3. Eco, Low, Med , . 4. Fenix ARB-L18-3400 4 . : 5. , 65°C. 6. 4 .
, 3 . : 100% – 85% : 85% – 50% : 50% – 25% : 25% – 1% . – Fenix ARB-L18.
, Low. Low , 3 10,
. . – Fenix ARB-L18.
High Turbo , . 60° C , . 60° C, High Turbo .
. , . . , .
: , . : .
. Fenix 18650 Fenix. , , – . , . . . , , : : . : (, ). B: . : , . , .
Fenix HM61R V2.0 WW , Fenix ARB-L18-3400 , , , ,
