936 Pink Baby Poodle
Pink Baby Poodle #936
User’s Guide
For Technical Support: Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST) 1-800-TEC-TOYS or 1-800-832-8697 [email protected]
50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax
914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com
Operation:
- Pink Baby Poodle requires 2 AA Batteries to operate.
- Alkaline batteries must be used (e.g. Duracell or Energizer
Brands). - Do not use rechargeable batteries because they supply a lower
voltage and the unit may not perform as well. - Never mix old and new batteries together or different brands or
types together.
compartment.
- Remove the small screw with a Phillips Head screwdriver.
- Install 2 AA batteries paying close attention to proper battery
polarity. - Replace the battery compartment cover and screw.
included) via the jack located at the end of Pink Baby Poodle’s
cord.
- Pink Baby Poodle is equipped with a 1/8 jack for use with
external capability switches with a 1/8 plug. - Make sure to have a tight connection. There should be no
gaps.
will spring to life!
- She will walk forward, raise her head, bark, and then
backup.
switch continues to be actuated.
- Once you release the external capability switch, there will be
a brief delay, and then Pink Baby Poodle will turn off.
Troubleshooting:
Problem: Pink Baby Poodle does not function
correctly.
Action #1: Replace the batteries paying close
attention to proper (+) & (-) battery polarity.
Action #2: Make sure that the connection
between the external capability switch and the jack is plugged in
all the way. There should be NO gaps.
Action #3: Try your switch with another
switch-operated toy/device in an effort to rule out your switch as
the source of the problems.
Care of Unit:
- Do not inhibit Pink Baby Poodle’s movement, as this may cause
irreversible damage. - Do not lift Pink Baby Poodle up by her head, tail, or legs, or
drop Pink Baby Poodle. - If you will not be using Pink Baby Poodle for an extended
amount of time, we recommend removing the batteries. - Do not submerge the unit in water, as it will damage the
electrical components. Pink Baby Poodle is surface washable
only.
Rev 5/12/2022
Pink Baby Poodle #936
USER’S GUIDE
For Technical Support: Call our Technical Service Department Monday through Friday, 9 a.m. to 5 p.m. (EST) 1-800-TEC-TOYS or 1-800-832-8697 [email protected]
50 Broadway Hawthorne, NY 10532 Tel. 914.747.3070 / Fax 914.747.3480 Toll Free 800.832.8697 www.enablingdevices.com
Woof, Woof! Take your baby poodle for a walk by activating your capability switch and it will move about forward and backwards raising its head and making cute barking sounds. Size: 5½”L x 6 ½ x “W x 3″H. Requires 2 AA Batteries. Requires 2 AA Batteries. Weight: ¾ lb.
Operation: 1. Pink Baby Poodle requires 2 AA Batteries to operate.
Alkaline batteries must be used (e.g. Duracell or Energizer Brands). Do not use rechargeable batteries because they supply a lower voltage and the unit may not perform as well. Never mix old and new batteries together or different brands or types together.
2. Turn Pink Baby Poodle upside down to reveal the battery compartment. Remove the small screw with a Phillips Head screwdriver. Install 2 AA batteries paying close attention to proper battery polarity. Replace the battery compartment cover and screw.
3. Connect Pink Baby Poodle to any external capability switch (not included) via the jack located at the end of Pink Baby Poodle’s cord. Pink Baby Poodle is equipped with a 1/8” jack for use with external capability switches with a 1/8″plug. Make sure to have a tight connection. There should be no gaps.
4. Actuate your external capability switch and Pink Baby Poodle will spring to life! She will walk forward; raise her head, bark and then backup.
5. Pink Baby Poodle will remain on while the external capability switch continues to be actuated. Once you release the external capability switch, there will be a brief delay, and then Pink Baby Poodle will turn off.
Troubleshooting: Problem: Pink Baby Poodle does not function correctly.
Action #1: Replace the batteries paying close attention to proper (+) & (-) battery polarity.
Action #2: Make sure that the connection between the external capability switch and the jack is plugged in all the way. There should be NO gaps.
Action #3: Try your switch with another switch operated toy/device in an effort to rule out your switch as the source of the problems.
Care of Unit: Do not inhibit Pink Baby Poodle’s movement, as this may
cause irreversible damage.
Do not lift Pink Baby Poodle up by her head, tail or legs, or drop Pink Baby Poodle.
If you will not be using Pink Baby Poodle for an extended amount of time, we recommend removing the batteries.
Do not submerge the unit in water, as it will damage the electrical components. Pink Baby Poodle is surface washable only.
Rev 5/12/2022
Products For People With Special Needs | Enabling Devices
