Beurer Rh 112 Lifepad Resuscitation Aid User Guide

beurer RH 112 LifePad Resuscitation Aid

HOW TO USE

1. Check for consciousness and breathing.
2. Make an emergency call.
3. Expose the upper body.
4. Place the LifePad.
5. Pull out the battery strip.
6. Place your hands on the patient.
7. Beep = push.
8. Perform the compressions
   LEDs indicate when sufficient pressure is applied (all LEDs light up one after the other from orange to green).
9. Release the chest again
   The LED feedback system helps here.
   If you are trained to do so, you can give 2 rescue breaths after 30 compressions.
10. Repeat steps 8 and 9 in rhythm with the acoustic signal to ensure a frequency of 100 compressions/min.
    The device does not have an ECG function. Perform cardiac massage until there are clear signs of life again or until the emergency doctor takes over.

Beurer GmbH 
Söflinger Str. 218 89077 Ulm (Germany)
www.beurer.com
www.beurer-gesundheitsratgeber.com
www.beurer-healthguide.com.

References

• Beurer Gesundheitsratgeber
• Beurer Health Guide
• Beurer GmbH