Bespoke Altar Frontal
Product Information: Bespoke Guide – Altar frontal
Thank you for your interest in commissioning a bespoke altar
frontal for your church. This document provides detailed
information on the ordering process, which consists of 6 main
steps:
- Style
- Orphreys
- Fabrics
- Trims
- Embroidery
- Tell us about your Altar
To place an order or inquire further, you can visit our website
at www.wattsandco.com or
contact us at (+1) 888-482-0772 or (+44) 20 7222 7169.
Step 1: Choose your style
The first step in designing your new altar frontal is to choose
the style. We offer the following options:
- Separate Frontal
- Separate Superfrontal
- Combined Frontal & Superfrontal
Please note that our superfrontals have a standard height of 7
including fringe unless otherwise indicated.
Step 2: Choose your orphreys
In this step, you have the option to choose whether you would
like orphreys in a contrasting fabric, outlined in braid, on your
frontal, superfrontal, or both. The number of orphreys can be
selected from 2, 4, or 6, evenly spaced across the frontal.
If you require assistance with orphrey placement, we can provide
recommendations based on the size of your altar. For altars up to
6ft, we suggest 2 orphreys (maximum 4). For altars between 6ft to
7’10, we recommend 4 orphreys (maximum 6). For larger altars, 6
orphreys are suitable. Special variations on orphrey placement can
be accommodated in the design.
If you are commissioning a Combined Frontal and Superfrontal,
you may also choose to counterchange the fabrics on the
superfrontal.
Step 3: Choose your fabrics
In this step, you can select the fabrics for your frontal,
including contrasting orphreys if applicable. We offer over 200
exclusive fabrics, which can be viewed on our website. Our
experienced design team is available to guide you through possible
combinations and assist with decision making. Sample fabrics can be
provided upon request.
Available fabric options include:
- Stag Cloth of Gold
- Sarum Red Gothic
- Comper Purple
- Comper Cathedral
- Blue Bellini
- Green Bellini
- Cream Gothic
Step 4: Choose your trimmings
In this step, you can select the trimmings for your altar
frontal. We offer a wide range of braids and fringes that
complement the chosen fabrics. Frontals and
superfroTnrtaaillsBarraeidtsriamnmd Ferdinwgietsh any of our 2
fringes as standard.
Available trimming options include:
- Sarum Red
- Red
- Comper Purple
- Old Gold
- Blue Bellini
- White Braid
- Blue Fringe
- 20mm Blenheim Braids
- 40mm Blenheim Braids
If you have any further questions or require assistance with any
step of the ordering process, please feel free to contact us at the
provided contact details.
Bespoke Guide: Altar frontal
Thank you for your interest in commissioning a bespoke altar frontal for your church.
This document details the ordering process in 6 main steps: 1 – Style 2 – Orphreys 3 – Fabrics 4 – Trims 5 – Embroidery 6 – Tell us about your Altar
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 1: Chose your style
The first step in designing your new altar frontal is to choose the style.
Separate Frontal
Separate Superfrontal
Combined Frontal & Superfrontal
Please note that our superfrontals have a standard height of 7″ including fringe, unless otherwise indicated.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 1: Chose your style
Latin Style Frontal
Latin Style Frontals are trimmed with a traditional arrangement of outline orphreys
in metallic gold braid,
Altar Pall, also known as a Laudian Frontal
Altar Palls drape over an altar, and are trimmed with 3″ `Bullion’ fringe. These can be made to cover the top
of your altar, along with either 3 or 4 sides.
You can choose either rounded or square corners, with the option for open or closed seams.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 2: Chose your orphreys
The next step in designing your frontal is to choose whether you would like orphreys in a contrasting fabric, and outlined in braid, on your frontal, superfrontal, or both.
You have the option of 2, 4, or 6 orphreys to be spaced evenly across the frontal.
We are happy to make orphrey recommendations based on the size of your altar, but we would generally suggest the following:
For altars up to 6ft – 2 orphreys (4 max) For altars between 6ft to 7’10” – 4 orphreys (6 max)
For larger altars – 6 orphreys If you would like a special variation on the orphrey placement, we would be happy to include this in the design.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 2: Chose your orphreys
If you are commissioning a Combined Frontal and Superfrontal, you may also wish to counterchange the fabrics on the superfrontal
– as in the examples here.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 3: Chose your fabrics
The next step is to choose the fabrics for your frontal – including your contrasting orphreys where applicable. We are pleased to offer over 200 exclusive fabrics, which you can view on our website here. Our experienced design team is on hand to guide you through the possible combinations, and to help with decision making if needed.
Stag Cloth of Gold
Sarum Red Gothic
Comper Purple Comper Cathedral
Blue Bellini
Green Bellini
Cream Gothic
Please feel free to get in contact if you would like to receive samples of fabrics you are interested in.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 4: Chose your trimmings
Sarum Red*
Red
SCaorummpeRreRd*ose*
RePdurple
Comp
We offer a large range of braids and fringes to complement the fabrics of your altar frontal. Frontals and SuperfroTnrtaaillsBarraeidtsriamnmd Ferdinwgietsh any of our 2″ fringes, as standard.
Blenheim
ChesterWe use ½” braid around the edge of contrasting orphreys.
r
Old Gold
Old Gold
BBllaucek
BeGllionlidBlue*
White BraidBB/lClaurceeka/mSiFlvrienrge
BeGllrineieBnlue*
Bla
20mm
20mm
20mm
Ble40nmhmeimBraids
Old Gold
40mm
Chester 10mm
Old Gold
TTTrrraaaiiilllBBBrrraaaiiidddsssaaannndddFFFrrriiinnngggeeesss
* Exclusive colours
20mm
BuSilrvfeor rd
Blenhe2i0mmm
Old Gold
Chester
20mm
Old GSoladrum Red*
BBBBRlllaleaaacdccckkkk
ComGpGGGeooorollldlRdddose* TrailWWWWbhhhrhitiiiatteteeeiBdBBBr:rrPraaa1aiudiiiddd//r//C2/CCpCr”rrlreeeeeaaaammmmFFFFFrrrrriiniiinnnngggggeeeee: 2″
GGGGrrrre
r ld
40mm 15mm 24mm
TBrrOCiaglhdihtlGGeooBslldtdrear ids15amnm2400mmdmm4F0mrmingOOeldldsGGooldld
24mm
OlBd uGrofldord
20m1m0mm 15mm 24mm40mm
20mm 10mm
37m2m0mm
15mm 40mm
24mm
ord
37mm
15mm
Bright Gold Bla3c7km2m0mm
OSldilvGerold
15mm 10mm 15mm
24mm 24mm
37mm
Old GoSldarum 3R7memd*
Old Gold
15mm
BuOrflod rGdoGld o3l7dmm
Bright GOolldd Gold
15mm
Old Gold
15mm 24mm
24mm
37mm
Re3d7mm
White Braid/Cream Fringe
Old Gold Blue
Old Gold
15mm
24mm
Comper37Rmmose*
BSSSSaeaaarlrrrluGuiuunmmmmrieBReRRRlneueeededdd***** PBBBBullrluluuupeeeele
BlaRRcRRkeeee/ddSddilver
CCCCoooommmmppppeeeerrrrRRRRoooosssseeee****
PPPPuuuurrr
* Exclusive colours BBBBeeeelllllliliininnniiiiBBBBllluluuueeee****Trail braid: 1/2BBBB”llallaaacccckkkkF///S/SrSSiiiliilvlnlvvvegeeererrr: 2″
24mm 37mm
24mm
37mm
Blue
Bellini Blue*
Black/Silver
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
* Exclusive colours Trail braid: 1/2″ Fringe: 2″
****EEEExxxxccccllluluuussssiiivi TTTTrrrraaaaiiililllbbbbrrrraaaaiiididdd::::1111////2222″”””
Step 5: Embroidery option
An additional step is to consider any embroidery that you may like. Our talented team of hand-embroiderers can cater to any design you desire, and our design team can offer suggestions on what might be most suitable for your church. We specialise in traditional hand embroidery techniques, such as goldwork, silk shading, appliqué,
as well as the highest forms of artist-led machine embroidery. Embroideries can be positioned on a frontal in a number of ways:
Across a superfrontal In the centre of a frontal Within or around the orphreys
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Step 6: Tell us about your altar
The final step in commissioning a new altar frontal is measuring your altar.
We need accurate measurements of the height, depth (or `mensa’), and width of the altar. We usually use inches as our main unit of measurement, but cm is also fine to use. Please refer to the diagram as a guideline.
Depth/Mesa
Length
Height
When measuring your altar, ensure that the tape measure is taut, and flat against the surface of your altar (where possible). We recommend that you have someone to assist you, so that measurements can be as accurate
as possible.
Please contact us if you have any questions regarding your measurements.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
How would the frontal be attached?
We also need to know how you plan to attach your frontal, so that this can be considered in the design. This will depend on the type of altar in your church.
If you are unsure how to attach a frontal to your altar, we can make recommendations. Just contact us with images of your altar, so that our technical team can assess the best way
to attach your new altar frontal.
Freestanding Altars
Our standard altar frontals are held in place with a counterweight rod. The frontal is attached to linen, which is then draped over the top and back of the altar.
A hem is sewn into the linen to fit a rod, which balances the weight of the frontal.
Linen
Back Counter weight rod
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
How would the frontal be attached?
Altars against a wall
If your altar is positioned against a wall, then there are typically two ways to attach your frontal: with a counterweight on the mensa, or with hooks.
Counterweight on Mensa
Here, the frontal is attached to linen, which drapes over the top of the altar. A hem is sewn to accommodate a counterweight rod, which can then sit in a groove (or divot) on the mensa.
For this method, please provide additional measurements of the width of the groove on your altar, and the distance between the wall and top of the groove. If possible, please measure the depth of the groove as well.
Linen
Rod here
Against the wall Rod on/in mesa
Mesa
Groove
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
How would the frontal be attached?
Hooks An altar frontal may be attached using hooks – either at the front of the altar, or at the back of the mensa.
Here, we would include a hem for a suspension rod, to hang the frontal from the hooks. If you attach your frontal with hooks, we need to know how these hooks are spaced across
your altar noting the distance between each hook, and how many hooks are used.
If your type of altar is not listed here, do not worry as we will always do our best to accommodate any attachment method.
Please note that we are unable to make any changes to your altar directly; if work needs to be done (such as the attachment of hooks or screws), then you would need to plan for this yourself.
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
If you have any questions, please contact us, we’ll be happy to help.
Rosie Thompson, Head of Sales & Bespoke
[email protected]
Joshua Minor, Bespoke Co-ordinator
[email protected] Phone
+44 20 7222 7169
www.wattsandco.com (+1) 888-482-0772 (+44) 20 7222 7169
Clergy Vestments | Traditional Catholic Vestments | Watts & Co.
