Briggs Stratton W158 1.5 Gal Combo Can Instructions

BRIGGS STRATTON W158 1.5 Gal Combo Can

INSTRUCTIONS

ALWAYS VENT CAN BEFORE EACH USE

1. To vent, place the can on a flat surface with the spout facing away from you. Unscrew black base cap to remove the spout from the can.
2. Reinstall spout and remove green dust cap. BE SURE THE BLACK BASE CAP IS TIGHTENED FIRMLY.

TWIST

Turn green collar 1/4” to the right until it locks in place.

ANCHOR

Insert spout into fuel tank. Rest the anchor hook on the lip of the fuel container opening.

PUSH

Push downward to begin the flow of fuel. To stop the flow of fuel, lift spout from tank.

THIS CONTAINER COMPLIES WITH CARB EMISSIONS FUEL CONTAINERS (13 CCR 2467 et seq.) www.tpgplastics.com
Consumer Service: (877) 522-6039 [email protected] Manufactured under license by TPG Plastics LLC Briggs & Stratton and Smart-Fill are registered trademarks of Briggs & Stratton Corporation. Assembled in USA, with Imported and USA parts.

References

• Plastics Design and Manufacturing | TPG Plastics