VALENCIA Single-Key Double-Key Switch
Product Information
The single-key / double-key switch is a product designed for
installation in walls. It consists of a clamping frame, contact
terminal clamps, a mechanism, and a key. The switch is used to
control electrical circuits by turning the key.
Product Usage Instructions
- To remove the key, use a flat screwdriver tip to hook and pull
it out. - To detach the clamping frame, hook both sides of it by turns
using a flat screwdriver tip. - Connect the wires to the contact terminal clamps and tighten
the screws to secure them. - Install the mechanism into the hollow in the wall and firmly
tighten the locking screws. - To assemble the product, follow the inverse order and firmly
snap the clamping frame to the unit housing. - Finally, install the key. If the unit has an indication, ensure
that the lens is located above the indicator light.
For further information or assistance, please refer to the
complete user manual available at https://tm.by.
/ «»
Installation directions for single-key / double-key switch
series «VALENCIA»
1
,
.
Remove the key by hooking with a flat screwdriver tip.
2
,
.
Detach the clamping frame by hooking its both sides by turns with a flat screwdriver tip.
https://tm.by –
3
, . Connect the wires to the contact terminal clamps, tighten the screws.
4
, , .
Install the mechanism into the hollow in the wall, tighten firmly the locking screws.
5
,
.
Assemble the product in inverse order, firmly snap the clamping frame to the unit housing.
6
.
,
.
Install the key. If the unit have an indication, make sure that the lens is located above the indicator light.
https://tm.by –
