Audio System As 165 Fl High Quality Flat-line Loudspeaker User Manual

Audio System As 165 Fl High Quality Flat-line Loudspeaker User Manual

audio-logo

AUDIO SYSTEM AS 165 FL High Quality Flat-Line Loudspeaker

AUDIO-SYSTEM-AS 165-FL-High-Quality-Flat-Line-fig- (2)

Congratulations on purchasing a high-quality

AUDIO SYSTEM product incl. GERMAN SOUND. Important: Completely read this operating instruction before installation and use of the device.

Attention: Pay attention to advices and instructions of the car manufacturer. Check the polarity when connecting the speakers. Important: You will need your purchase receipt as proof of purchase for any and all warranty repairs and for insurance purposes. Keep your receipt, owner´s manual and packing materials in a safe location for possible future use.

Attention: Use of sound components can impair your ability to hear necessary traffic sounds and may constitute a hazard while driving your automobile. AUDIO SYSTEM GERMANY accepts no liability for hearing loss, bodily injury or property damage as a result of use or misuse of our products.

We recommend installing the equipment by an authorized service center or dealer. A professional fitting and connection is the requirement for further warranty and perfect sound

 
Warning: First disconnect negative pole of your car battery. Check-polarity, changing polarity may cause serious damage to your car electric. Best speaker positions are the original build in positions. Easy installation and original look are the reasons.

Please note that the speakers are installed flat and stable. The quality of the installation decides very much the sound, therefore, attention should be paid to insulation and care during installation. Please note that the speakers are protected from heat, sunlight, mechanical influences, moisture and wetness by accessories from AUDIO SYSTEM.

Attention: Install all cables as straight as possible without squashing or laying them over sharp edges. Otherwise this can cause short circuit or damages to your whole installation.

Attention: Be careful removing original plastic parts of your car. The fitting parts could be damaged and have to be replaced.

Important: The right polarity of all speakers is extremely important for the sound of your car audio system. We recommend changing polarity of the tweeter finding out the best possible sound.

The best is to listen and/or to measure it.

AUDIO-SYSTEM-AS 165-FL-High-Quality-Flat-Line-fig- (3)

Music130Watt 

 

Power

RMS90Watt
 dB89.1dBSPL
 Fb65-5000HzFrequency Range
 Re2.6WDC Resistance
 Zn3.0WNominal Impedance
 Fs72HZResonance Frequency
 D28mmVoice Coil Diameter
 +/-2,5mm X-Max Linear Excursion                                                                 
 Qms6.01QmsMechanical Q Factor
 Qes1.00QesElectrical Q Factor
 Qts0.85QtsTotal Q Factor
 Mms11.5GrammMoving Mass
 Vas7.65LiterEquivalent Air Volume
 Bl4.00TmForce Factor
 Sd130cm²Effective Membrane Surface

Frequency Response and ImpedanceAUDIO-SYSTEM-AS-165-FL-High-Quality-Flat-Line-Loudspeaker-FIG2

audio system germany
www.audio-system.de

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals