EFM Wireless Charge Pad User Manual
Product Overview

PACK CONTENTS
- lx EFMe.)15W Wireless Charge Pad
- lx Warranty Details/Instruction Manual
- lx 1M Type C Cable
TECHNICAL SPECIFICATIONS
| Parameter | Value |
| Input | 5V 2A/ 9V 2A/ 12V/1.75A |
| Output | 15W/10W/7.5W/5W |
| Dimensions | 100mmx2Omm |
| Weight | 94gm |
CAUTION:
- Please read the instruction manual before using this product.
- Do not modify, repair or dismantle the wireless charge pad. Doing so may result in fire, electric shocks or a complete breakdown of the product all of which are not covered under warranty.
- Do not use any or volatile liquids to clean the product surface.
- Do not use the product in a hazardous location.
- The product should be kept in a dry and ventilated environment, do not store in an area of high humidity and/or high temperature.
USING THE WIRELESS CHARGE PAD

- Connect the supplied Type-C cable to the designated port on your EFM® 15W Wireless Charge Pad.
- Plug the USB-A connector into a USB power source.
- Ensure that the charge pad is positioned correctly with the rubber device platform facing upwards. (Device platform has both Qi and Ultra Fast Charge icons)
- ‘Place your Qi-Supported mobile device on the charging area.
- Check that the charge pad’s LED status indicator lights up on placement of your device.
Please Note: The proper placement of your mobile device onto the charge pad will depend entirely upon the location of the wireless charging coil within your mobile device.
MOBILE DEVICES WITH CASES
Wireless charging is designed to work on cases up to 3mm in depth. EFM cannot guarantee that your device will charge if you have attached a case thicker than 3mm on to your mobile device. Please ensure that you remove any cases or covers before placing your mobile device on the wireless charge pad as they may reduce the charging efficiency.
LED STATUS INDICATOR
| Colour | Status |
| Blue | Standard Charging |
| Purple | Fast Charge mode |
| Red | Device not aligned correctly on charger.” Foreign object obstructing wireless signal. |
| LED Off | No mobile device on charge pad |
Do not use unsupported devices on the wireless charge pad, only devices that support the Qi wireless standard are recommended.
WARRANTY DETAILS
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
EFM® warrants that its products are free from defects in materials or workmanship for up to 5 years from the date of purchase. EFM® will repair or replace any product which is defective in materials or workmanship at no charge to the customer (for parts or labour). The customer is responsible for any transportation costs.
This warranty only applies to EFM® products purchased by you, and does not extend to or cover damage caused by the incorrect use or installation of the EFM® product, through your modification of the EFM® product, cosmetic damage, general wear and tear, or damage caused by accident. This warranty does not apply to any consequential loss or damages which may be incurred through your use of the EFM® product, including but not limited to damage of any nature caused to any products used in conjunction with the EFM® product.
To claim under the warranty, you need to return the faulty EFM® product to the place of purchase (at your expense) with a valid proof of purchase. If you are not able to return the product to the place of purchase, you can contact:
EFM Customer Service Department
PO BOX 684, Belmont WA 6104
P:1300 069 336 (1300 0 MYEFM)
E: [email protected]
Important: For the avoidance of any doubt, this 5 Year Warranty applies to your purchased EFM® product only, and not to any device to which the EFM® product is affixed or used in conjunction with. Whilst we stand by our products, EFM® will not be liable for any damages of any nature caused to any such device from incorrect use of the product. For more information visit myefm.com.
REPLACEMENT WARRANTY REGISTRATION INSTRUCTIONS:
- Register your product along with your proof of purchase (receipt) within 14 days at www.myefm.com/register.
- If you have any issues with your registered product during the warranty period, complete the Warranty Claim form, including any images of the fault, at www.myefm.com/warranty.
- We will review your claim and, if approved, please send your faulty product back to us (at your cost) Upon receipt your free replacement product will be sent to you free of charge anywhere within Australia.
Please Note: Only products registered within 14 days of purchase with a valid receipt are eligible for the EFM Registered Warranty Program.
This program covers EFM products only, not devices and/or device parts. The 5 Year free replacement warranty is limited to 1 replacement per verified proof of purchase registration.


















