OD-A2032W LED Landscape Lighting Deck Lights
Product Information:
- Product Name: LED Landscape Lighting – Deck Lights
- Model: OD-A2032W
- Operating Voltage Range: 9V-15V AC/DC
- Application: Outdoor lighting for decks
Product Usage Instructions:
- Ensure that the installation is carried out by a qualified
electrician. - Read all installation instructions provided in the attached
instruction sheet. - Install the step light in accordance with the National Electric
Code (NEC) and local code specifications. - Keep the fixture away from combustibles.
- Turn off or unplug the fixture before changing the lamp.
- Do not touch the lamp directly when changing it after
servicing. - When using multiple luminaires, ensure that the total load does
not exceed the transformer rating. - Do not operate the LED Deck Light if it is fitted with a
missing or damaged shield. - Ensure that all luminaires are installed at least 10 feet
(3.05m) away from a pool, spa, or fountain. - Use a soft cloth to handle the lamp and avoid touching it
directly with your hands to prevent damage from oil on the
skin. - Always use UL, cUL, and CSA recognized wire connectors for
connections. - Avoid using extension cords on power units.
- Avoid touching hot lens, guard, or enclosure.
Components:
- Lights
- Installation Instruction
- Mounting Screws
- Fixture Cap
- Plastic Anchors (optional)
- Screws
- Drill Template (FIG. B)
Contact Information:
Ortech Industries
Email: [email protected]
Website: www.ortechindustries.ca
Locations:
- 13376 Comber Way, Surrey BC V3W 5V9
- 205 Summerlea Rd, Brampton, ON L6T 4E5
Contact Numbers:
Toll-Free: 1-888-543-6473
Toll-Free (alternate): 1-888-541-6474
LED Landscape Lighting — Deck Lights
MODEL OD-A2032W
Instruction Manual
WARNING
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.
1. Read all installation instructions before installing the fixture and keep the attached instruction sheet.
2. This step light is intended for installation in accordance with the National Electric Code (NEC) and local code specifications.
3. The operating voltage range is 9V-15V AC/DC.
Application Notice
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, READ THE INSTRUCTIONS BELOW:
1.
Keep away from combustibles. Turn OFF / unplug to change lamp. DO NOT touch the lamp and replace after
servicing
2.
When using multiple luminaires, load is not to exceed the total watts of trasformer rating
3.
DO NOT operate the LED Deck Light fitted with a missing or damaged shield
4.
Install all luminaires 10 feet (3.05m) or more from a pool, spa, or fountain
5.
DO NOT touch the lamp directly at any time. Use a soft cloth. Oil from skin may damage the lamp
6.
ALWAYS use UL, cUL, and CSA recognized wire connectors for connections
7.
DO NOT use extension cords on power units
8.
DO NOT touch hot lens, guard, or enclosure
CAUTION
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician.
COMPONENTS
Please make sure the following items are included when opening the box:
INSTALLATION
Lights
Installation Instruction
Mounting Screws
1. Turn off the power supply. 2. Open the fixture by twisting the cap counterclockwise, then pulling the cap away from the fixture. The first time it may be difficult. 3. Determine the desired location for each fixture, if desired, drill the wireway hole at this time. Hold the fixture in correct d irection (lead the wire through the wireway hole if necessary), secure with screws. When installing on surfaces like brick or concrete walls, plastic anchors are required. Mark the location of the holes with the template in FIG.B and drill the holes for the plastic anchors with an appropriate drill bit for the material you are drilling into. Place the plastic anchors in the holes. If desired, drill the wireway hole at this time. Put fixture with gasket at back to the location, (lead the wire through the wireway hole if necessary) screw the 2 screws into the anchors through the holes on the fixture, securing the fixture. 4. Strip the 2 leads from the fixture pigtail wire. Connect the leads from the fixture to the main low voltage supply cable leads. 5. Put back the cap and fix it by twisting clockwise.
UP
Fixture
Cap
[email protected] www.ortechindustries.ca
Plastic Anchors (optional)
Screws
FIG . B Drill Template
FIG . A Installation on Posts / Walls (most common use)
13376 Comber Way Surrey BC V3W 5V9
205 Summerlea Rd Brampton, ON L6T 4E5
1-888-543-6473 1-888-541-6474
Led Lighting, Electrical and Hvac Supplier Ortech Industries
