In Common With Gemma Sconce Backplate Instruction Manual

Gemma Sconce Backplate

Product Information:

The Gemma Sconce is a stylish and modern light fixture that can
be easily installed in your home. It comes with all the necessary
components and tools required for installation. The sconce includes
a backplate, mounting bracket, canopy, mounting screws, Wago clips,
set screws, base screw, tool, G9 LED bulb, diffuser, and Gemma
shade. The light fixture is designed to provide a warm and inviting
ambiance to any room.

Product Usage Instructions:

1. Before starting the installation process, ensure that you have
   received all the components mentioned in the user manual. If
   anything is missing, contact us for assistance.
2. Turn off the electrical power source at the main fuse box or
   circuit panel to avoid any electrical shock risk.
3. Mount the backplate (Part A) to the junction box using a
   Phillips head screwdriver. Tighten the mounting screws (Part D) to
   secure the backplate. Ensure that the wires from the junction box
   remain accessible.
4. Use the Wago clips (Part E) to connect the fixture’s wires to
   the corresponding wires from the junction box. The white wire is
   neutral, the black wire is live, and the green/yellow wire is
   ground. One ground wire should be attached to the backplate (Part
   C), while the other ground wire should come from the junction box.
   If needed, use a wire stripper to remove 3/8 of the insulation from
   each wire before inserting them into the Wago clips.
5. Align the canopy (Part B) with the backplate (Part A) and
   attach them together using the provided set screws (Part F).
6. Slide the Gemma shade (Part K) carefully over the socket.
7. Secure the shade (Part K) into place using the washer and
   provided tool (Part H).
8. Insert the included G9 LED bulb (Part I) into the socket.
9. Thread the diffuser (Part J) over the bulb.
10. Turn on the power at the main fuse box or circuit panel that
    was previously turned off during installation.

Follow these instructions carefully to ensure a successful
installation of your Gemma Sconce. If you have any further
questions or need assistance, please don’t hesitate to contact
us.

Gemma Sconce, Backplate
How to Install Your New Light Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
Tools you will need that aren’t included: standard wire stripper, Phillips head screwdriver.
CAUTION Electrical shock risk. Turn off electrical power at the main fuse box or circuit panel before beginning installation, servicing the light, or installing accessories. We recommend working with a qualified electrician familiar with the type of work you’d like done.
ATTENTION Risque de choc électrique. Coupez l’alimentation électrique au niveau de la boîte à fusibles principale ou du panneau de circuits avant de commencer l’installation, l’entretien de la lumière ou l’installation d’accessoires. Nous vous recommandons de travailler avec un électricien qualifié familier avec le type de travail que vous souhaitez effectuer.

Contents

Part A Backplate

Part B Mounting Bracket

Part C Canopy + L Bracket

Part D Mounting Screws (x2)

Part E Wago Clips (x3)

Part F

Part G

Part H

Set Screws (x2) Base Screw (x2) Tool + Washer

Part I G9 LED Bulb

Part J Diffuser

Part K Gemma Shade

Assembly Guide

1 of 4

incommonwith.com

Gemma Sconce, Backplate

Step 1: Turn off electrical power at the main fuse box or circuit panel before beginning installation.

Step 2: Mount the backplate (A) to the junction box using a phillips head screwdriver to tighten the mounting screws (E). Make sure that the wires from the juntion boz are still accessible.

A D

!

Step 3: Use the wago clips (E) to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be attached to the backplate (C), the other ground wire should come from the junction box. If needed use a wire stripper to remove 3/8″ of the insulation from each wire before inserting them into the corresponding wago clip.

Step 4: Align canopy (B) with backplate (A), attach using the provided set screws (F)
F

E A
C C

Assembly Guide

2 of 4

incommonwith.com

Gemma Sconce, Backplate

Step 5: Carefully slide the Gemma shade (K) over the socket.

Step 6: Secure the shade (K) into place using the washer and provided tool (H).

H K

Step 7: Push included bulb (I) into socket. I

K
Step 8: Thread the diffuser (J) over the bulb. Turn the power back on at the main fuse box or circuit panel you disabled before installation.
J

Assembly Guide

3 of 4

incommonwith.com

References

• In Common With