Supereq S1 Hybrid Active Noise Cancelling Headphones User Manual

1. Please fix the issue with the headphones’ insufficient power. The charging module will be impacted by an unstable charging current, which could result in the module entering the protection mode after charging (it cannot be turned on)
2. To complete the factory reset, please insert the 3.5mm audio wire from the headphone accessory into the headphone 3.5mm connector. Once more, you can use the headphones.
3. We hope you can contact our official customer service email if your issue cannot be resolved.

We have installed over-voltage protection for the headset in order to prevent fire or burning the charging IC when charging. The headset will immediately enter the overvoltage protection status and stop charging if you use a charger that is more powerful than SV. Use of the original 5V charging plug is advised.

You can hear your surroundings with bionic hearing thanks to novel ambient sound technology. With these soundproof headphones, you may easily interact with others without taking off your ANC headphones because the music is muted and speech is amplified by microphones.

Possibly because you activated ambient mode. Bionic hearing works on the basis of a novel ambient sound technology that enables you to hear your surroundings. These soundproof headphones have mics that decrease the music and amplify conversation so you can easily converse with people.

1. In an area without obstructions, a Bluetooth headphone’s effective range is 10 meters. For instance, the headphone signal will be reduced by going through a wall when utilized indoors.
2. Bluetooth headphones are susceptible to signal instability in high-traffic areas like airports, railway stations, subways, bus stops, retail malls, and places with a lot of signal sources like signal lights and monitors.

You must hold down the shutdown button for 5–6 seconds after turning on the headphones. The headset has entered pairing mode when the signal lights start to alternately and quickly flash. You can’t enter the pairing mode if you push the shutdown button for too little time.

You must hold down the shutdown button for 5–6 seconds after turning on the headphones. The headset has entered pairing mode when the signal lights start to alternately and quickly flash. You can’t enter the pairing mode if you push the shutdown button for too little time.

The S2 is an on-ear headset, whereas the S1 is an over-the-ear (circumaural) headphone (supra-aural). Additionally, the S1 offers a transparency mode and longer battery life.

The SuperEQ S1 can connect to many phones simultaneously, that much is true.

Numerous Points of Contact (Max: Two Devices) Verify that the over-ear headphones have been successfully connected to the first Bluetooth device. Turn off Bluetooth on the primary device. Open the Bluetooth on the second device, search for the “SuperEQ S1,” and choose it to pair with yours.

But unlike conventional active noise-cancelling headphone designs, which either place the microphones inside or outside the earcups, hybrid noise-cancelling headphones feature both.

Hybrid noise-cancellation techniques include hybrid noise-cancellation, which uses microphones to detect and then eliminate background noise. Being outside, the microphones tend to block out a wider range of frequencies and perform better with typically louder sounds.

1. To turn on the headphones, press and hold the Bluetooth button for three seconds.
2. To turn off the headphones, press and hold the Bluetooth button for 5 seconds.

Yes, noise-canceling headphones generally shield your ears from external noise, both actively and passively. PNC headphones save your hearing by sealing your ears from harsh outside noises, especially fleeting noises like gunshots or explosions.

The Sony WH-1000XM4, which employs hybrid ANC technology, is the most effective ANC headphone currently on the market. With a noise reduction of up to -30 dB, it provides the best noise cancellation. The Sony WH-1000XM3, Bose QuietComfort 35, Bose 700, Wilkins PX Wireless & Apple AirPods Max, and Bowers & Wilkins are additional potent noise-canceling headphones.

However, sleep is not often intended for noise-cancelling headphones. In reality, most of them are too bulky to allow you to sleep comfortably because padding improves the seal and noise reduction. You can’t just choose any noise-canceling headphones for sleeping because of this.

Increased sound pressure: Active noise-cancelling headphones can exert persistent pressure on your eardrum, giving you a headache or perhaps making you feel nauseous or confused.

Video