092014 Tori Gold Floor Lamp
Product Information: 092014 TORI FLOOR LAMP
This Tori Floor Lamp is designed for indoor use only. It comes
with a polarized plug, where one plug blade is wider than the
other. The lamp should not be modified in any way, including the
plug or power cord. The recommended bulb wattage should not be
exceeded, and only the specified type of bulb should be used. It is
important to keep flammable materials away from the bulb. The
product should not be opened or the wiring altered. When using an
extension cord, follow the precautions provided with the power
cord.
Unpacking
When unpacking the product, care should be taken to locate all
parts included before disposing of packing materials.
Assembly, Care, and Troubleshooting
No tools are required for the assembly of this lamp. A light
bulb is not included and needs to be purchased separately. The
parts included in the package are as follows:
- A. Shade Finial
- B. Shade
- C. Harp
- D. Lamp base
To assemble the lamp:
- Unpack all parts carefully from the carton.
- Put Harp (C) onto the iron lamp body (D).
- Place Shade (B) onto Harp (C).
- Secure with Finial (A).
To care for and clean your lamp:
- Use a soft dry cloth to clean the lamp.
- Do not use cleaners, scouring pads, or any abrasive
materials. - Before changing the bulb, unplug the lamp and allow the bulb to
cool.
Troubleshooting
If you encounter any issues with the lamp, refer to the
following troubleshooting guide:
| Problem | Possible Cause | Correct by |
|---|---|---|
| Bulb does not light | Bulb is burnt out or damaged | Replace bulb |
| Power to lamp is off | Confirm power is on | |
| Lamp is not plugged in | Confirm lamp is plugged in |
If the lamp still does not work after troubleshooting, contact
your local Ethan Allen Design Center for assistance.
Please save these instructions for future reference.
@2016 Ethan Allen Global, Inc.
092014 TORI FLOOR LAMP
ASSEMBLY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY:
This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade
is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOTEXCEED the
recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from
bulb. DO NOT OPEN the product or alter the wiring in any manner. Extension cord: Follow precautions
provide with power cord.
UNPACKING:
Use care when unpacking.Locate ALL PARTS INCLUDED before disposing of packing materials.
ASSEMBLY,CARE,AND TROUBLESHOOTING
Tools Required For Assembly: Tools are not required.
Required: Light bulb is not included.
Parts Included: Refer to Figure1.
A. Shade Finial.
B. Shade.
C. Harp.
D. Lamp base
Assembly Procedure: Refer to Figure1.
1. Unpack all parts from carton carefully.
2. Put Harp (C) onto the iron lamp body (D).
3. Place Shade (B) onto Harp (C)
4. Secure with Finial (A).
Caring for and Cleaning your lamp:
1. To clean, wipe with soft dry cloth.
2. DO NOT USE cleaners, scouring pads, etc.
3. Unplug lamp and allow bulb to cool before changing bulb.
Troubleshooting:
Problem:
Possible cause: Correct by:
Bulb does not light Bulb is burnt out or Replace bulb
damage
Power to lamp is off Confirm power is on
Lamp is not plugged Confirm lamp is
in
plugged in
In the event that the lighting fixture does not work after
Troubleshooting,contact your local Ethan Allen Design Center.
SAVE THESE INSTRUCTIONS
@2016 Ethan Allen Global,Inc.
Page1of 1
