90676 1-Tier Plastic and Steel Closet Organization Shelving Unit Shoe Rack
Product Information
The 24 in. White / Gray / Birch Shoe Rack (2PK) – Add-On is a
shoe rack add-on kit that can be added to your existing vertical
rails. The kit includes two 24 in. x 16 in. wire shelves, four 16
in. shoe shelf brackets, two shoe shelf bracket clips, and two
decor shoe shelf covers. The product is available in three
different colors: white, gray, and birch.
The product is easy to install and comes with all the necessary
parts and instructions. The wire shelf is designed to hold shoes
securely, and the decor shoe shelf cover provides a finished look
to the rack.
The product comes with a 2-year warranty against defects in
materials and workmanship.
Product Usage Instructions
- Remove the protective film on the decor shoe shelf cover before
installation. - Install the shoe shelf brackets (B) on your existing vertical
rails. Pay attention to the installed site of left and right
vertical rails. - Place the wire shelf (A) on the installed brackets (B),
ensuring the rear horizontal rod sits under the back hooks of the
brackets (B). - Install the clips (E) over wire shelf (A) and onto brackets (B)
as shown in the diagram. - Put the decor shoe shelf cover (C) on the lip of wire shelf
(A), then install it as shown. - Install the end caps (D) on the decor shoe shelf cover
(C).
Note: If you install more than 2 PCS of decor shoe shelf covers,
it is not necessary to put the end caps between them.
If the product is defective, call 1-800-305-1726 or return the
product to the store from which it was purchased for a
replacement.
WARNING: This product can expose you to chemicals, including
lead, which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information go
to www.P65Wamings.ca.gov
Use and Care Guide
Item #1007-775-853 / 1007-782-020 / 1007-782-059 Model #90676 / 90678 / 90680
24 in. White / Gray / Birch Shoe Rack (2PK) – Add-On
A
B
C
Installation
PARTS LIST
Part
Description
Quantity
E
A
24 in. x 16 in. Wire Shelf
2
B
16 in. Shoe Shelf Bracket
4
C
24 in. Décor Shoe Shelf Cover
2
D Décor Shoe Shelf Cover End Cap Set (both ends) 2
D
E
Shoe Shelf Bracket Clip
8
NOTE: Please remove protective film on the decor shoe shelf cover before installation.
1 Install shoe shelf brackets (B) on your existing vertical rails. Pay attention to the installed site of left and right vertical rails.
2 Place the wire shelf (A) on the installed brackets (B), ensuring the rear horizontal rod sits under the back hooks of the brackets (B).
3 Install the clips (E) over wire shelf (A) and onto brackets (B) as shown below.
24 in. (60.9 cm)
Center-to-center spacing
Left
Right
B
1
1
2
2
A B
A
Right
Left E
B
NOTE: The bracket has two angles as 69°and 80.5°. Pick the angle you want and make sure all of brackets have the same angle.
Example of finished installation
4 Put the decor shoe shelf cover (C) on the lip of wire shelf (A), then install as shown.
C A
5 Install the end caps (D) on the decor shoe shelf cover (C). D Right
Example of finished installation
BE
Lip
Put end caps on this part first.
D Left
C
NOTE: If you install more than 2 PCS of decor shoe shelf covers, it is not necessary to put the end caps between them.
Warranty
This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.
HOMEDEPOT.com Please contact 1-800-305-1726 for further assistance.
WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov
The Home Depot
