Otterbox Obftc-0094-a Wireless Charging Pad User Guide

Otterbox Obftc-0094-a Wireless Charging Pad User Guide

Quick Start Guide
OtterBox Charging Pad
OBFTC-0094-A, 78-80537, 78-80563,
78-80632, and 78-80633

Unpacking

OtterBox OBFTC 0094 A Wireless Charging Pad - Box

Components

OtterBox OBFTC 0094 A Wireless Charging Pad - Component

① USB-C Port
② Charging Pad

Charging your device

OtterBox OBFTC 0094 A Wireless Charging Pad - ChargingOtterBox OBFTC 0094 A Wireless Charging Pad - Charging 1

Specification

Input5V/3A 9V/2.22A 12V/1.67A
Output5Wireless 15W (Max)
Size Dimensions56.0×56.0x5.6mm
Weight61.0g
TemperatureOperating Temp: 0°C- +35°C Storage Temp.: -20°C- +70°C

Manufacturer:
Company Name: DONGGUAN KETAIHONG ELECTRONICS CO., LTD
Address: Second Industrial Zone, Shujiu Village, Changping Town, 523569 Dongguan, Guangdong, PEOPLE’S REPUBLIC OF CHINA

Contact

OtterBox OBFTC 0094 A Wireless Charging Pad - QR Code

For more information, please visit: https://www.otterbox.com

Attention

OtterBox OBFTC 0094 A Wireless Charging Pad - AttentionDo not expose products to excessive heat (e.g. from storage in direct sunlight, fire, or the like).
Do not try to take the product apart. It may cause serious damage
Do not drop or knock the product on hard surfaces.
Do not use chemicals or detergents to clean the product.
 Use the original cable or certified cables.

WARNING — Do not hang any type of accessory or accessory bracket from the plug

Warranty

FCC Statement
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

ISED Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement
This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the radiator & your body.

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals