MBF8005GR Commercial Refrigerator
Product Information
The Top Mount Reach-Ins are refrigeration units available in six
different models: single-door freezer, two-door freezer, three-door
freezer, single-door refrigerator, two-door refrigerator, and
three-door refrigerator. Each model has a unique model code and
operates on a power source of 220-240 V with a rating frequency of
50 Hz. The input power for each model ranges from 1520 to 1800
watts, with a rated current of 7.4 amps. The temperature range for
the units is -22 to 17 degrees Celsius. The refrigerant used is
R290, and the amount used is 150 grams. The dimensions of the units
vary depending on the model, but they are all top mount reach-ins
with a volume ranging from 600 to 1400 liters.
The cabinet is designed to operate within specific ambient
temperature and humidity levels, which can be found on the product
description label. The product is classified under climate class 4
or 5, and these levels should never be exceeded to ensure proper
operation of the unit.
In case of water overflow from the re-evaporation tray on the
back of an upright cabinet, it is necessary to connect a drain hose
(Inner diameter 10 mm) to the tray. The hose should lead to the
floor or drain in the floor. There is a quick connector on the
drain pan where the user can connect the drain hose.
The upright cabinets are designed to allow up to 72 door
openings per day according to EN16825. If the use of the door
exceeds this level, it is necessary to connect the drain pipe(s) to
an external drain.
Product Usage Instructions
1. Place the Top Mount Reach-In unit on a level surface within
the specified ambient temperature and humidity levels.
2. Connect the unit to a power source of 220-240 V with a rating
frequency of 50 Hz.
3. Adjust the temperature to the desired range (-22 to 17
degrees Celsius) using the temperature controls located on the
unit.
4. If water overflow occurs from the re-evaporation tray on the
back of the unit, connect a drain hose (Inner diameter 10 mm) to
the tray. The hose should lead to the floor or drain in the floor.
Use the quick connector on the drain pan to connect the drain
hose.
5. If the use of the door exceeds 72 openings per day, connect
the drain pipe(s) to an external drain.
6. Clean and maintain the unit regularly according to the
manufacturer’s instructions.
Top Mount Reach-Ins
Product Description Model code Power source (V) Rating frequency(Hz) Inpurt power(w) Rated current(A) Temperature range () Refrigerant Amount(g) Dimension (mm) Volume (L)
Single-door freezer Two-door freezer Three-door freezer Single-door refrigerator Two-door refrigerator Three-door refrigerator
MBF8001GR 220~240 MBF8002GR 220~240 MBF8003GR 220~240 MBF8004GR 220~240 MBF8005GR 220~240 MBF8006GR 220~240
50 670 3.0 -22-17 R290 120 730×845×2065 600
50 980 4.5 -22-17 R290 150 1314×845×2065 1200
50
-22-17 R290 150
1800
1520 7.4
1976×845×2065
50 220 1.1 -2+8 R600a 110 730×845×2065 600
50 350 1.8 -2+8 R600a 140 1314×845×2065 1200
50 450 2 .5 -2+8 R290 150 1976×845×2065 1800
NOTES :If the technical data has any changes, we will not notify you any longer.
The cabinet is designed to run within specific ambient temperature and humidity levels. These are set out in the climate class system. These levels are never to be exceeded. The climate class for this product can be found on the product description label.
Climate Class
Ambient Temperatures and Humidity
4
+30°C with 55% RH
5
+40°C with 40% RH
In case of water overflow from the re-evaporation tray on the back of an upright cabinet the user must connect a drain hose (Inner diameter 10 mm) to the tray. The hose shall lead to the floor/drain in the floor.There is quick connector on the drain pan where the user can connect drain hose.
PRELIMINARY DEFROST WATER CHECK
The upright cabinets are constructed to allow up to 72 door openings per day according to EN16825. If the use of the door is excessive of this level it is necessary to connect the drain pipe(s) to an external drain.
W0811755 version number 20211216
