Everbilt 90682 Closet Rod Support Bracket User Guide

90682 Closet Rod Support Bracket

Product Information

The Closet Rod Support Bracket (2PK) is a chrome add-on that
comes with two brackets. The item number is 1007-782-452 and the
model number is 90682. The product is designed to support closet
rods and can hold up to 6 rods or more, with a maximum length of 18
inches. The installation of the closet rod brackets should be done
before any decorative shelf covers are installed on the shelf.

Warranty

The product comes with a 2-year warranty from the date of
purchase, guaranteeing that it is free of defects in materials and
workmanship. If the product is defective, customers can call
1-800-305-1726 or return it to the store from which it was
purchased for a replacement. The warranty does not cover normal
wear and tear.

Warning

Customers should be aware that this product contains chemicals,
including lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more
information, customers can visit www.P65Wamings.ca.gov

Product Usage Instructions

  1. Before installing any decorative shelf covers, install the
    Closet Rod Support Brackets onto the shelf.
  2. Place the Closet Rod Support Brackets at the desired location
    on the shelf.
  3. Attach the Closet Rod Support Brackets to the shelf using
    screws or other hardware appropriate for the shelf material.
  4. Insert the closet rod into the brackets and adjust it to the
    desired height.
  5. Repeat for additional closet rods, ensuring that each rod is
    properly supported by the brackets.

Use and Care Guide

Item # 1007-782-452 Model # 90682

Closet Rod Support Bracket (2PK)- Chrome-Add-On

K

Closet Rod Support Bracket x 2

Installation
´ Count 6 rods or more from one side of the wire shelf and install closet rod brackets as shown. Maximum spacing between closet rod brackets is 18 in. for this system (see Fig. 1).
´ Put the closet rod support bracket (K) at an angle as shown and place the back part onto the horizontal rod (B) (see Fig. 2).
´ Pull down the closet rod support bracket (K) and snap onto the shelf’s front rod (C) (see Fig. 2 and Fig. 3).

6 rods or more

21

Rod C

Rod B

Max 18 in. K

Fig. 1

K
3

K Fig. 2

NOTE: Closet rod brackets need to be installed BEFORE any decorative shelf covers are installed on shelf.

Fig. 3

Warranty
This product is guaranteed to be free of defects in materials and workmanship for 2 years from the date of purchase. If this product is defective, call 1-800-305-1726 or return the product to the store from which it was purchased for a replacement. Guarantee does not include normal wear and tear.

HOMEDEPOT.com Please contact 1-800-305-1726 for further assistance.

WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Wamings.ca.gov

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals