Atlas Electric Trial Bike
Product Information: EVELO Atlas
EVELO Atlas is a high-quality electric bicycle designed for
comfortable and efficient commuting. With its powerful motor and
long-lasting battery, it provides a smooth and enjoyable riding
experience. The bike features a sturdy frame, front suspension, and
a range of convenient accessories, making it suitable for various
terrains and weather conditions.
Key Features:
- Powerful motor for effortless riding
- Long-lasting battery for extended range
- Sturdy frame and front suspension for comfortable rides
- Front fender and headlight for improved visibility
- Easy assembly with detailed instructions
Product Usage Instructions
- Unboxing Your EVELO:
- Begin by cutting the banding and opening the box. Be cautious
of the sharp staples. - If you are unable to lift the bike, lay the box on its side and
slide the bicycle out. - Carefully remove all packing material from the bike, avoiding
the use of sharp objects to protect the paint. - Find the tools and user guides in the small black Evelo box.
The pedals will be in a small cardboard box. - Lower the kickstand to keep the bike upright during
assembly.
- Begin by cutting the banding and opening the box. Be cautious
- Assembly of EVELO Atlas 2 – Install Fender and Headlight:
- Remove the screw in the Front Fork.
- Remove the spacer.
- Thread the headlight and spacer onto the screw.
- Attach the headlight and fender assembly to the fork.
- Assembly of EVELO Atlas 3 – Install Front Wheel:
- Remove the bolts from each side of the fork and attach lower
fender support struts. - Remove the thru-axle from the fork by flipping the lever open
and rotating it counterclockwise. There is a nut on one side and a
lever on the other. - If present, remove the brake pad spacer from between the brake
pads.
- Remove the bolts from each side of the fork and attach lower
- Assembly of EVELO Atlas 4 – Install Front Wheel:
- Put the front wheel into place.
- Slide the black axle into place and tighten the nut on the
opposite side. - Close the lever tightly, ensuring it leaves an imprint on your
hand after closing. - Make sure the lever is pointing straight up towards the
handlebars to prevent the wheel from coming loose while
riding.
- Assembly of EVELO Atlas 5 – Install Handlebars:
- Rotate the fork so that the cables aren’t wrapped around the
frame and the arch is facing forward. Both brake calipers should be
on the left-hand side of the bike. - Loosen the stem clamp bolts, rotate the stem to point forward,
and tighten the bolts. - Remove the 4 screws on top of the stem faceplate.
- Place the handlebars in the cradle and align them with the
center. - Replace the cover and the 4 screws on top of the
handlebars.
- Rotate the fork so that the cables aren’t wrapped around the
- Assembly of EVELO Atlas 6 – Install Pedals:
- Screw the pedals into the crank arms securely using a 15 mm
wrench. Each pedal is marked with an “L” or an “R” for
reference. - Note that the pedals are threaded differently. The right pedal
screws in clockwise, and the left pedal screws in
counterclockwise.
- Screw the pedals into the crank arms securely using a 15 mm
- Assembly of EVELO Atlas 7 – Use of Battery:
- Two copies of the key are attached to the handlebars.
- Use the key to unlock the battery, which will release
downward. - Handle the heavy battery with care. When reinstalling, push it
firmly into place. - Power up the bike, and you’re ready to ride!
- Assembly of EVELO Atlas 8 – Serial Number Location:
To register your bike on our website, record the serial number
located on the headtube above the front fork. - Assembly of EVELO Atlas 9 – Additional Information:
For more detailed information, refer to your User Guide. If you
have any questions, our team is always ready to assist you.
Assembly of EVELO Atlas
The focus of this document is to assist with the assembly of your new EVELO Atlas. The scope is intentionally narrow The “User Guide” that was included with your bike covers a much broader spectrum of topics: fit adjustments, battery care, controls etc.
Our Team is here to help 7 days a week [email protected] | 877-991-7272 Feel free to reach out!
Watch the Assembly Instructions Video
Unboxing Your EVELO
1 Begin unboxing the bike by cutting the banding then opening the box. Use caution regarding the staples as they can be very sharp. Remove the small boxes.
2 Laying the box on its side and sliding the bicycle out of the box is a great technique if you are unable to lift the bike.
3 Carefully remove all packing material from bike, avoid using sharp objects as to protect the paint.
4 Tools and User Guides will be in the small black Evelo box. The pedals will be in a small cardboard box.
3 Lower kickstand to keep bike upright
during assembly.
ASSEMBLY OF EVELO ATLAS 2
Install Fender and Headlight
1 Remove the screw in the Front Fork.
2 Remove Spacer.
3 Thread Headlight and Spacer onto screw.
4 Attach Headlight and Fender assembly to fork.
ASSEMBLY OF EVELO ATLAS 3
Install Front Wheel 1 Remove bolts from each side of fork and attach lower fender support struts. 2 Remove thru-axle from fork by flipping lever open and rotating counter clockwise.
There is a nut on one side, a lever on the other.
3 Remove brake pad spacer from in between brake pads – it may be tight but simply pulls out. If this piece is not in place, skip this step. ASSEMBLY OF EVELO ATLAS 4
Install Front Wheel
4 Put Front Wheel into Place
5 Slide black axle into place, tightening the nut on the opposite side.
6 Close the lever, it should be tight enough to leave an imprint on your hand after closing.
7 Make sure the lever is pointing straight up towards the handlebars. Installing the axle incorrectly can result in the wheel coming loose while riding.
ASSEMBLY OF EVELO ATLAS 5
Install Handlebars
Rotate Fork:r otate the steering assembly so that the cables aren’t wrapped around the frame and
1 the arch is facing forward. Both brake calipers should be on the left hand side of the bike. Loosen the stem clamp bolts, rotate the stem so it points forward and tighten the bolts.
1 Remove the 4 screws on top of the stem faceplate.
2 Place Handlebars in cradle and align with center.
3 Replace cover and the 4 screws on top of handlebars.
ASSEMBLY OF EVELO ATLAS 6
Install Pedals 1 Screw pedals into crank arms securely. Installation of the pedals requires a 15 mm wrench.
There is an L and an R stamped into the end of each pedal for reference.
2 It is important to note that the pedals are threaded differently. The right pedal screws in clockwise and the left pedal screws in counter-clockwise.
ASSEMBLY OF EVELO ATLAS 7
Use of Battery
1 Two copies of the key come attached to the handlebars.
2 Use the key to unlock the battery, the battery releases downward.
3 The battery is heavy, please be careful. When reinstalling, push the battery into place firmly.
5 Power up the bike and you’re ready to ride!
ASSEMBLY OF EVELO ATLAS 8
Serial Number Location
To register your bike on our website, you will need to record the serial number. It is located on the headtube of your bike, just above the front fork.
ASSEMBLY OF EVELO ATLAS 9
There is considerable additional information in your “User Guide”. Of course, if you ever have questions, our team is ready to help!
Our Team is here to help 7 days a week! [email protected] | 877-991-7272
Feel Free to reach out!
