Ibe Fsm750 French Stick Moulder Instruction Manual (+ PDF)

Contents hide

FSM750 French Stick Moulder

Product Information: Product Name: French Stick Moulder FSM750
Model Number: FSM750 Manufacturer: International Bakery Equipment
Pty Ltd (I.B.E.) Address: 20 Brewer Street, Clontarf, QLD 4019,
Australia Phone: 1300 099 011 or +61 7 3889 5700 Email:
[email protected] Website: www.allaboutbakery.com.au
Product Usage Instructions: 1. General Information: – The user
manual contains important information regarding the installation,
operation, and maintenance of the French Stick Moulder FSM750. –
Contact details for International Bakery Equipment Pty Ltd (I.B.E.)
are provided for any inquiries or assistance. – This manual is
protected by copyright and cannot be reproduced without prior
written permission from International Bakery Equipment Pty Ltd. –
The information provided in the manual is in accordance with the
technical and safety specifications of the machine. – The
manufacturer reserves the right to make technical modifications or
improvements without prior notice. 2. Transport and Installation: –
Follow the instructions provided for safe transport and
installation of the French Stick Moulder FSM750. – Ensure proper
testing and safeguards are in place before operating the machine.
3. Machine Operation: – Familiarize yourself with the intended
operation of the French Stick Moulder FSM750 as described in the
manual. – Understand the control components and their functions. –
Follow the instructions for operating the sheeter. 4. Cleaning
& Maintenance: – Proper cleaning procedures are outlined in the
manual to ensure hygienic operation of the machine. – Regular
maintenance is required to keep the French Stick Moulder FSM750 in
optimal condition. – A spare parts list, exploded parts drawings,
and electrical diagrams are provided for reference. 5. Warranty
Terms and Conditions: – The warranty coverage is subject to the
final decision of I.B.E. Pty Ltd. – The covered parts include those
specified in the warranty terms, while certain parts may have
immediate claim requirements. – Refer to the manual for detailed
information on what is covered and what is not covered under the
warranty. For more information and detailed instructions, please
refer to the complete user manual available on the official
website: [All About Bakery](www.allaboutbakery.com.au)

View Fullscreen

Instruction Manual for French Stick Moulder FSM750
INSTRUCTION MANUAL

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
FRENCH STICK MOULDER

MODEL: FSM750

Contents
1. General Information:
1- Documentation supplied 2- Contact details 3- Use of this manual 4- Intellectual property rights 5- Warranty terms and conditions 6- Machine specifications 7- Machine identification details 8- Main components of the machine 9- Safeguards

2. Transport and Installation:
1- Transport 2- Installation 3- Testing & Safeguards

3. Machine Operation:
1- Intended operation 2- Control components 3- Sheeter operation

4. Cleaning & Maintenance:

1- Cleaning 2- Maintenance 3- Spare parts list

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
4- Exploded parts drawings 5- Electrical diagrams

1. General Information:
1.1 Documentation supplied
· Instruction manual · Spare parts list · Wiring diagrams

1.2 Contact Details
International Bakery Equipment Pty Ltd (I.B.E.)
Address:
20 Brewer Street CLONTARF QLD 4019 Australia
Phone:
1300 099 011 or +61 7 3889 5700
E-Mail:
[email protected]
Web:
www.allaboutbakery.com.au

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
1.3 Use of this Manual
Please read carefully the information supplied in this manual before installing, operating or carrying out maintenance on this machine. This manual must be kept in good condition and stored where it can be easily found when required.
1.4 Intellectual Property Rights
This manual contains copyright information. All rights are reserved. No part of this manual can be reproduced or photocopied without prior written permission of International Bakery Equipment Pty Ltd. Permission to use this documentation has only been given to the customer who this manual has been supplied as part of the machine’s equipment and only for the purpose of installation, operation and maintenance of the machine to which the manual refers.
International Bakery Equipment Pty Ltd declares that the information contained herein is in accordance with the technical and safety specifications of the machine to which the manual refers. International Bakery Equipment Pty Ltd will not be held responsible for direct or indirect damage or injury to people or objects resulting from the misuse of this documentation or the machine for which it has been intended.
The manufacturer reserves the right to introduce technical modifications or improvements both to the documentation and to the machines without prior notice. The information contained herein refers in particular to the machine specified in section 1.7 “Machine identification details “.

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750

1.5 Warranty Terms and Conditions

· Warranty becomes effective from date of delivery.
· Warranty claims may be made by telephone, letter, email or fax. However all verbal claims must be confirmed in writing. I.B.E. Pty Ltd Reserves the right to require return of all claimed defective parts.
· I.B.E. Pty Ltd will ship the part(s) in an expeditious manner as requested.
· Mechanical and Electrical parts are warranted for a period of 12 months from date of delivery.
· During the first 12 months, I.B.E. Pty Ltd will reimburse the Authorized Agent or Purchaser for the cost of reasonable labour during normal working hours, 8.00a.m. 5.00p.m., to remove the failed part(s) and install the replacement(s). After 12 months all charges will be the Purchasers responsibility.
· After the initial 12 months warranty, any replacement parts are warranted for 3 months excluding labour.
· This Warranty may not be changed or modified and is not subject to any other Warranty expressed or implied by any other Agent, Dealer or Distributor unless approved in writing by I.B.E. Pty Ltd in advance of any claim being filed. This Warranty gives you specific legal rights which vary from State to State.

Note:
I.B.E. Pty Ltd reserves the right to make the final decision on all Warranty coverage questions. The decision of the Company is final.

What is covered under this Warranty:
· Parts that fail due to defects in material workmanship. · Parts that fail due to faulty assembly by I.B.E. Pty Ltd · Parts that fail due to improper set-up by I.B.E. Pty Ltd
What is not covered under this Warranty:
· Parts that fail due to improper usage or overloading of the machine. · Parts that fail due to lack of maintenance. · Parts that fail due to abuse, misuse or modification.

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
· Mixer attachments – Bowl, whisk, beater and/or hook. · Normal wear parts, such as, Conveyor belts, `v’ belts, `o’ rings and scraper and slicer
blades. The Warranty on these parts is, they will be in satisfactory operating condition at time of delivery and initial start-up. Claims in such parts must be made immediately.
· Loss of time, potential revenue and/or profits.
· Personal injury or property damage resulting from the operation of the machine.

1.6 Specifications

Crate Dimensions:
Length (cm) 126.5

Width (cm) 89

Machine Specifications

Height (cm) 105

Weight (Kg) 250

Model

Motor H.P.

Dimensions L WH cm cm cm

Weight Kg (Net)

FSM750 1 970 820 1570 210

Power Supply Details:
Three Phase, 10amp 4-pin plug top (supplied)

Note:
The Manufacturer will not be Liable for electrical defects, breakdowns or malfunctioning of the machine for the non compliance with the power supply stated.

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
1.7 Machine Identification Details
Type: French Stick Moulder Model: FSM750
Position of Serial Number Identification Plate (Fig 1.1)

Serial number Identification
plate

Fig 1.1

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750

Note:
When requesting spare parts please state the serial number found on the serial number identification plate.

1.8 Main Machine Components

In-feed roller gap Control

Forming belt

Moulding Pressure control

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
Emergency Stop Switch On/Start
Button Dough in-feed
chute

Out feed chute
Out Feed Table

Fig1.2 Main Machine Components

1.9 Safeguards

This machine has been fitted with safeguards to ensure safe operation of this machine, in accordance please ensure the following;

· Do not place foreign objects on or under the belts.

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
· Ensure training in the safe operation of this machine is carried out with all operators. · Do not wear loose clothing, ties, chains, or watches that could get caught into the
moving parts of the machine. · Ensure safeguards are in operable order before using the machine on a daily basis. · Tampering with the safety devices creates hazards for the machine operator, for which
International Bakery Equipment Pty Ltd or its agents will not be liable.
Note:
In the event that one or more of the safe guards do not operate or fail contact your supplier immediately. DO NOT OPERATE THE MACHINE.
Tampering with or modifying the machine will void warranty.
Emergency Stop Button. The machine is equipped with a red emergency stop button located on the left panel of the machine and allows the operator to stop the machine in case of emergency see Fig 1.2
Limit switched in-feed chute. The in-feed chute of the machine is fitted with a limit switch, when the in-feed chute is pressed down the machine will stop immediately; the green start button must be pressed for the machine to operate again. (Fig 1.3)

Fig1.3 In-feed chute in operating position

2. Transport and Installation:

2.1 Transport
The instructions given in this section must be carefully followed when transporting the machine. This operation may include but is not limited to the following:

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
· Storage of the machine · Installation of the machine · The machine comes supplied in a secure packing crate which needs to be handled with
care to protect the machine. · When being transported the machine crate should be secure to the transporting veichcle
using approved tie down straps to avoid the machine tipping over. · The machine should not be placed on top of other items during transport. · When lifting the machine ensure all persons are at a safe distance. · The forklift operator is to hold the appropriate qualifications. · Do not climb on or place body under machine crate when it is being lifted from the
ground or transport veichcle. · When lifting the machine crate ensure forks are spread to the maximum width of the
crate and the crate is against the cradle of the forklift.

2.2 Installation

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
· Ensure transport crate and all protective packaging is removed. · Carefully clean the machine using a damp clean cloth, removing dust on all surfaces. · When the machine has been unpacked, check the condition of the machine. Any visible
damage indicates that the machine has been dropped or hit by something during transport. This could lead to malfunctioning. If damage has occurred during transport it should be attributed to the carrier and International Bakery Equipment Pty Ltd or its agent should be informed immediately of the situation. · Locate the moulder on a flat surface in a convenient position of the production area where the operation of the machine is safe and accessible and lock the castors. · Before making the electrical connections check the specifications found in section 1.6 of this manual and ensure they match those of your electrical service. · Make certain the electrical supply is correct and the correct breaker is in place to ensure protection from a short circuit. · A qualified person should correct electrical connection if required. · Train all operators in the safe operation of this machine.
2.3 Testing the safeguards
Before starting the machine, the safety devices should be checked according to the following procedure:
· Correct operation of the in-feed chute limit switch (Fig 1.3, page.9); While the machine is operating press down on the front of the in-feed chute, the machine should stop immediately.
· Correct operation of the emergency stop button (Fig 1.2, page.8); While the machine is operating, press the emergency stop button, the machine should stop immediately.

3. Machine Operation:

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
3.1 Intended Operation
This machine has been designed and manufactured for the final moulding of dough pieces for bread baguettes’, French sticks, long rolls etc with the use of two rollers to express the air from the dough piece, pressure belts to form the dough into a cylinder and moulding belts to give the desired length of the final product and to seal the seam.
This machine has been designed and built to operate indoors.

3.2 Control Components

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
d. c.

a.
Fig 3.1 FSM-750 Control Components

Location Description

Operation Performed

On Switch When the green switch is pressed the power is turned on. a

Emergency When pressed it stops the machine completely.

stop

Button

In-feed gap Control wheel

Adjusts the space between the in-feed rollers depending on the size of the dough piece, this should be adjusted with the machine

running.

Moulding pressure

Adjusts the space between the moulding belts depending on the final length of the dough piece desired, this should be adjusted

Control wheel with the machine running.

3.3 French Stick Moulder Operation

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
These operating procedures are to be used as a guide, as every bakeries dough consistency is different.
These steps should be used to set up the FSM750 to your specific product and by keeping records of the settings it will assist in the day to day operation of this machine, be aware though you may still need to fine tune the settings that you record as your dough can change i.e. longer than normal bench rest, or a slacker dough.
· Set the in-feed gap control knob (c) to suit the dough piece. · If the dough piece tears the rollers are to close, open rollers further until dough piece
does not tear.
· If the dough piece is too lose and the finished baked product has air holes in it the rollers need to be brought in closer.
· Dough piece should be firm once through the rollers. · The pressure belt which lies on the top of the top moulding belt assists in forming the
dough into the final shape prior to the dough piece dropping and going between the moulding belts.
· Bottom dial opens and closes the gap between the moulding belts. · These belts determine the final length of the product and helps seal the seam of the
product.
· If your product is too long open the gap wider. · If your product is too short the gap should be brought in closer.

4. Cleaning &Maintanance:

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
4.1 Cleaning
· Always turn power off at the wall and unplug machine prior to cleaning or maintenance.
· This machine should be cleaned at the end of every day, to prevent a build up of dough crumb and flour dust.
· Fold down upper cover. · Clean any hard dough crumb from pressing rollers with a plastic scraper flour dust
can be removed with a brush · Wipe over with a damp cloth ( not dripping wet) · While cover is off the machine it can be dusted off with a brush and wiped over with a
damp cloth. · Body of the machine can be dusted off and wiped over with a damp cloth. · Replace upper cover. · While cleaning the machine check for any wear on belts. · If the machine starts operating strangely (different sound, belt slipping) during normal
operation please contact a qualified technician as soon as possible
Note:
Do not use water jets or hoses to clean this machine as excess water can damage the machine, and the safe operation of the electrical components.

4.2 Maintenance

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750
It is recommended that this machine should be serviced once every 12 months by a qualified technician to maintain hassle free operation.
If in the event the machine does not operate correctly it is recommended that you contact your supplier to ensure a qualified technician services the machine for you.
It is not advisable to attempt any repairs without prior knowledge of the mechanical or electrical systems used in the manufacture of this machine, use only qualified technicians.
Note:
Any attempt to modify this machine in any way will result in the warranty being voided.
Tampering with the mechanical or electrical systems in this machine will void warranty.

4.3 Spare Parts List

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750

No.

Description

050 Right machine wall

07 Left machine wall

105 Roller

110 Roller

130 Roller

140 Roller

185 Bearing Fixing Plate

190 Bearing housing

200 Bearing housing

205

Fixing holder of adjusting rack

208

Cover for fixing holder of adjusting rack

210 Eccentric wheel

225

Adjusting rack for moulding plate

235 Rotary adjusting shaft

240

Fixing shaft of machine body

245

Fixing shaft of machine body

250 Idle wheel holder

252 Idle wheel

253 Idle wheel rack

255 Link rack

256 Link rack

258 Link

260 Link

262 Link

4.4 Exploded Parts Drawing

No.

Description

263 Link 265 Cover of adjusting plate 278 Belt pulley 280 Belt pulley of motor 300 Sprocket 305 Sprocket 310 Sprocket 315 Sprocket 320 Sprocket 325 Sprocket

335 Worm gear

338 Worm

340

Fixing holder of adjusting rod

355 Fixing holder of rotary shaft

360 Rotary shaft

365 Rotary shaft
410 Extension spring 455 Round rod 460 Washer for adjusting knob BL1 Belt BL2 Belt M-1 Motor B-1 Bearing SW1 Switch

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750

www.allaboutbakery.com.au

Instruction Manual for French Stick Moulder FSM750

4.5 Electrical Wiring Diagrams