Inr Twin Tall Cabinet Instructions (+ PDF)

Contents hide

SAFETY REGULATIONS

	Goggles are recommended to protect your eyes.
	We recommend that two persons are present at the installation.
	Use safety shoes during installation.
	Note! Always set the furniture down on a soft foundation, since edges and corners are very delicate.

Screw fastenings should be made in concrete or other solid structure (a), wooden studs, wooden noggings (b), or in structures that have been tested and approved for fastenings, for example, sheet construction (c). Requirements for sealing apply in wet zones 1 and 2. See examples of construction at säkervatten.se. Sealing materials must be ﬁ fixed to the underlying layer and must be waterproof, mold-resistant, and age-resistant.

TOOLS

INSTALLATION

MAINTENANCE ADVICE

To learn more, please visit inr.se
If in doubt regarding your choice of cleaning method, test ﬁrst on a small, inconspicuous area.
Lacquered wooden surfaces
Cupboard doors, drawers, and frames can be cleaned with a slightly damp cloth and mild detergent. Avoid the use of furniture polish, scourers, abrasive cleaning agents, ammonia, or other strong solvents. Water and splashes should be wiped off immediately with a dry cloth.
Glass and metal surfaces
For mirrors and glass surfaces, use nonabrasive glass polish and a cloth. For metal surfaces, use a slightly damp cloth and a mild detergent solution.
WARRANTY
See inr.se
RECYCLING
Metal, wood, and glass are separated and recycled separately.

INR Norge
Fjordgaten 13 A
3125 Tønsberg
Norge
Tel +47 33 33 02 00
[email protected]
www.inr.no