EPICURE Stainless Steel Built In Barbecue Griddle Grill
Product Information: Epicure Stainless Steel Built-in
Barbecue
The Epicure Stainless Steel Built-in Barbecue is a high-quality
electric appliance designed for cooking and grilling food. It is
manufactured by Southern Stainless Pty Ltd and operates on 120V
power supply. The model number of this barbecue is SSDIE-2-120V.
The appliance comes fully assembled and includes a stainless steel
flange, brass hose tail for drainage purposes, and a fat gutter for
easy cleaning.
Important Safety Precautions
- Read all instructions prior to operation.
- Ensure the barbecue is installed correctly and in accordance
with local standards. - Use the appliance only for cooking/grilling food and avoid any
other unsuitable use.
Installation Instructions
- Remove the appliance from the packaging and dispose of all
transit protection materials. - Ensure all packing and plastic has been removed from the
barbecue. - Mount the barbecue into a bench top cut-out with a minimum
set-back of 90mm from the front, back, and sides of the
cabinet. - Apply a silicone bead around the outside edge of the barbecue
between the stainless steel flange and the bench top
(optional). - Connect a 12mm inside diameter flexible hose (not supplied) to
the brass hose tail for drainage purposes. - Have a qualified electrician hardwire the power supply using
the two 240V, 1600W, 6.5 amp elements connected to a single power
supply. - Place the fat gutter into position between the elements for
easy cleaning.
EPICURE
STAINLESS STEEL BUILT-IN BARBECUE
120V
Instruction Manual
Epicure 120V
SSDIE-2-120V
IT IS IMPORTANT THAT YOU READ THIS DOCUMENT BEFORE ATTEMPTING TO USE YOUR COOKOUTTM EPICURE BARBECUE
OPS-FRM-05.4
Epicure Instruction Manual
MODEL NUMBERS
Revised: 2023-02-08
Type: Epicure 120V
Model Number: SSDIE-2-120V
Record the serial number of your appliance here for future reference: __________________________________________
(The serial number is located on the outside of the packaging and on the appliance)
READ THESE INSTRUCTIONS BEFORE USE
This manual is an integral part of the appliance. It must be kept in its entirety in an accessible place for the working life of the appliance. This manual and all information contained within must be read carefully and understood before using the appliance. Installation must be carried out by qualified person in accordance with local standards. The appliance has been designed for cooking/grilling of food. Any other use is considered unsuitable.
2
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
TABLE OF CONTENTS
Revised: 2023-02-08
MODEL NUMBERS …………………………………………………………………………………………………………………………..2 READ THESE INSTRUCTIONS BEFORE USE ……………………………………………………………………………..2 IMPORTANT SAFETY PRECAUTIONS …………………………………………………………………………………………4 INSTALLATION ………………………………………………………………………………………………………………………………..5
Assembling your barbecue ……………………………………………………………………………………………………….5 Installing your barbecue……………………………………………………………………………………………………………5 OPERATING INSTRUCTIONS ………………………………………………………………………………………………………..8 MAINTENANCE …………………………………………………………………………………………………………………………….. 10 How to clean your barbecue ………………………………………………………………………………………………….10
External cleaning………………………………………………………………………………………………………………….10 Cleaning the barbecue plate………………………………………………………………………………………………11 WARNING ……………………………………………………………………………………………………………………………………….12 Electrical specification…………………………………………………………………………………………………………….12 SERVICING ……………………………………………………………………………………………………………………………………..12 CONTACT US ………………………………………………………………………………………………………………………………….13
3
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
Revised: 2023-02-08
IMPORTANT SAFETY PRECAUTIONS
When using this electric appliance, please observe the following safety requirements:
1. Read all instructions prior to operation. 2. The barbecue should be installed into a benchtop cut-out as specified in the installation
instructions, and it must be installed by a suitably qualified person. 3. Do not touch hot surfaces; allow to cool before handling. 4. To protect against electric shock, avoid contact between the plug and fluids. 5. Unplug the appliance when not in use. 6. Children must always be closely supervised near the appliance. 7. Exercise caution with loose fitting clothing when operating this appliance. 8. The appliance must not be used unsupervised by any person with diminished capability. 9. Do not use if the plug or power cord is damaged. 10. Do not modify the appliance or use unapproved attachments. 11. The appliance is not intended to be operated by means of an external timer or separate
remote-control system. 12. Do not leave the appliance unattended during cooking or when heating oil. 13. Do not use this appliance for anything other than its intended use. 14. Do not use or store flammable materials near this appliance. 15. Do not place articles on or against this appliance. 16. Do not use aerosols in the vicinity of this appliance while it is in operation. 17. Do not use a steam cleaner on this appliance. 18. Do not use water to extinguish a fire use a dry chemical fire extinguisher. 19. In the case of malfunction, discontinue use and contact the manufacturer. 20. Repairs must only be carried out by the manufacturer or a qualified service person.
4
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
INSTALLATION
Revised: 2023-02-08
Assembling your barbecue 1. Your CookoutTM Epicure barbecue is fully assembled and ready to be installed.
2. Remove the appliance from the box and dispose of all transit protection material, including plastic, cardboard and polystyrene foam, appropriately.
3. Read thoroughly all information provided in this instruction manual.
Installing your barbecue 1. Ensure all packing and plastic has been removed.
2. Your barbecue is designed to be mounted into a bench top which should be cut out to suit the following:
3. A minimum set-back of 90mm is required from the front, back and sides of the cabinet into which the barbecue is being installed.
4. Apply a silicone bead around the outside edge of the barbecue between the stainless steel flange and the bench top, if desired.
5. There is a brass hose tail (pictured on the following page) underneath the barbecue on the right hand side to suit a 12mm inside diameter flexible hose (hose not supplied). This is for drainage purposes – run a suitable length of hose from the brass hose tail to the required location.
5
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
Revised: 2023-02-08
6. The power supply is to be hardwired in by a qualified electrician. There are two 240V, 1600W, 6.5 amp elements connected to a single power supply.
7. Place the fat gutter into position between the elements as shown below:
6
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
8. Insert the hotplates using the plate lifter tool as shown:
Revised: 2023-02-08
9. Installation of your CookoutTM Epicure barbecue is now complete.
7
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
OPERATING INSTRUCTIONS
Revised: 2023-02-08
1. Check the power supply is turned on. 2. Ensure there is no flammable material on the barbecue plate. 3. Choose the desired side for cooking (left or right hand cooking zone)
8
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
Revised: 2023-02-08
4. Turn the temperature control clockwise so the control knob indicator aligns with the high temperature indicator.
5. Allow between 5 and 10 minutes for the barbecue plate to reach full temperature.
6. Place your food on the plate and start cooking. When cooking large amounts of food or thick meat cuts, leave the temperature on high until the meat is seared then assess the rate of cooking and turn the temperature down if required.
7. When you have finished cooking, turn the temperature control anti-clockwise to the OFF position.
DO NOT LEAVE THE HOT PLATE ON HIGH FOR MORE THAN 10 MINUTES IF FOOD IS NOT BEING COOKED.
9
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
MAINTENANCE
Revised: 2023-02-08
How to clean your barbecue The outer body of your Epicure barbecue is manufactured from quality 316 marine grade stainless steel, and the plate is cast iron with a glass enamel finish. As its name suggests, `stainless’ steel stains less than steel but it must be cleaned regularly. If the barbecue has not been cleaned for long periods, you may notice a brown discolouration starting to form on the stainless steel surfaces this is called tea-staining and it can be prevented by following this cleaning guide.
External cleaning
1. The exterior surfaces should be cleaned or wiped down regularly to prevent tea-staining and to prolong the high finish of the stainless steel.
2. If tea-staining occurs it should be attended to in the early stages as it will be much easier to remove. If left, it will gradually get worse until it turns into rust.
3. Washing the exterior of the barbecue using a wet cloth and warm soapy water will help to remove general contamination found in the air such as dust, dirt and salt. Do not hose the barbecue or pour water directly over the controls.
4. When applied to the external surfaces, silicone-based polishes are ideal to help the stainless steel form a protective layer to prevent tea-staining and rusting. Apply and work the polish with a soft cloth then remove the polish with a second, clean, soft cloth. Do not use silicone based products on the cooking surface.
5. Do not use scouring pads or steel wool on the stainless steel body, surround or control panel as it will damage the stainless steel surface, leaving it prone to rusting.
10
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
Epicure Instruction Manual
Revised: 2023-02-08
Cleaning the barbecue plate
1. The plate can be removed for easy cleaning using the supplied plate lifting tool as pictured below:
2. After cooking, the surface should be carefully wiped with paper towel or a damp cloth. Alternatively, the hot plate can be removed using the plate lifter once the barbecue has cooled. It can then be washed with warm soapy water.
3. Do not use scouring pads or steel wool on the hot plate surface. 4. Please note the barbecue plate is not dishwasher safe.
FAILURE TO PROPERLY MAINTAIN YOUR BARBECUE WILL VOID WARRANTY
INSTRUCTIONAL VIDEOS
Please visit our You Tube channel for information and ideas: Cookout Barbecues https://www.youtube.com/results?search_query=cookout+barbecues
11
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
WARNING
Epicure Instruction Manual
Revised: 2023-02-08
· Conduct a visual inspection for damage prior to each use look for damaged plugs or cords, debris and signs of impact.
· If the barbecue does not appear to be working properly, seek help from a suitably qualified service person.
· This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
· Children should be supervised to ensure they do not play with the appliance. · Charcoal or similar combustible fuels must not be used with this barbecue. · Power to the appliance should be supplied through a residual current device (RCD)
having a rated residual operating current not exceeding 30mA. · The power lead should be unplugged when the barbecue is not in use.
Electrical specification
SERVICING
This barbecue must only be serviced by a suitably qualified person. If you have any questions regarding the operation or maintenance of this appliance, please contact the manufacturer.
12
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
OPS-FRM-05.4
CONTACT US
Epicure Instruction Manual
Revised: 2023-02-08
Your CookoutTM Epicure barbecue is proudly manufactured in Australia on the Gold Coast by Southern Stainless Pty Ltd. Please contact us if you have any questions relating to the installation, operation or maintenance of this appliance.
13
Southern Stainless Pty Ltd – Artisans in Metal – Uncontrolled when printed
