Home EV Charger
Product Information:
The Home EV Charging Installation is a product designed to
facilitate the charging of electric vehicles at home. It is
recommended by Audi for customers to hire licensed electricians who
are trained, certified, and insured to install a NEMA 14-50 outlet
on a 240 volt, 50 amp circuit for AC Level 2 home charging. The
installation must comply with local electrical and building
codes.
The product includes the following features:
- NEMA 14-50 outlet
- 240 volt, 50 amp circuit
- AC Level 2 charging
Product Usage Instructions:
- What you will need:
- A trusted local licensed electrician who is properly trained,
certified, and insured. - NEMA 14-50 outlet specifications.
The location of your vehicle’s charge port may vary based on the
model. When installing the outlet, consider the charger mounting
and cable length. Plug in your charge cable based on the
orientation of the outlet’s ground pin.
Recommended Installation: Ground on top
Optional Installation: Ground on bottom
Discover Qmerit for additional support.
Additional Support:
If you need further assistance or have any questions, please
contact Qmerit for additional support.
Home EV Charging Installation
Quick Start Guide
For the best EV ownership experience, Audi recommends customers reach out to trusted local licensed electricians that are properly trained, certified, and insured to install a NEMA 14-50 outlet on a 240 volt, 50 amp circuit for AC Level 2 home charging. Installation must comply with local electrical and building codes. The overview below may be provided directly to your certified installer.
01
What you will need
NEMA 14-50 Specifications
Circuit Breaker …………………….. 50 Amp Voltage …………………………….. Single Phase, 208-240 Volt, 60 Hertz Outlet Type ………………………… High quality, Industrial Grade NEMA 14-50 receptacle Conductors ………………………… 6 AWG recommended, Copper wires only (Upsized wiring for installations over 150 feet) Weather Protection ……………… Install NEMA 3R (or higher) weather resistant enclosure Ventilation ………………………… Not required Service Disconnect ……………….. Not required Ground Fault Circuit Interrupter . Not required
02 How & Where to Install
The location of your vehicle’s charge port will vary based on model. Outlet placement should take charger mounting and cable length into consideration.
Based on the orientation of the outlet’s ground pin, you can plug in your charge cable accordingly.
Recommended Installation: Ground on top
Optional Installation: Ground on bottom
Home EV Charging Installation
Quick Start Guide
03 At-Home Vehicle Charging Made Easy
Discover Qmerit
*
Additional Support
Customer Support (800) 822-2834 MondayFriday, 10am7pm (ET)
