Anker 555 Portable Power Station User Manual

555 Portable Power Station

Anker 555 Portable Power Station (PowerHouse 1024Wh)

Product Information:

Product Usage Instructions:

Recharging Your Product:

• DC Recharging (200W Max): Recharge your power station by
  connecting to a wall outlet with the 200W AC adapter.
• Solar Panel Recharging (200W Max): Recharge your power station
  by connecting up to 2 100W solar panels in parallel with a solar
  charging cable and an XT60-DC7909 connector.
• USB-C Recharging (100W): Recharge your power station by
  connecting it to a charger via the USB-C port.

Powering Your Devices:

• AC Charging: Press the AC button and connect your devices to
  the AC output ports.
• USB Charging: Connect your devices to the USB ports.
• Car Socket Charging: Press the button on the car socket,
  connect your devices, and start charging.

Power Saving Mode:

Switching on the power saving mode prevents wasting power by
automatically turning off the Power Station once all your devices
are fully charged. Switching off the power saving mode will enable
stable charging over an extended period, such as for timelapse
photography or for sleeping with a CPAP machine.

LCD Screen Guide:

• Press the button to turn on the LCD screen.
• High-Temperature Alert: Indicates if the power station is
  operating at a high temperature.
• Remaining Battery: Shows the remaining battery percentage.
• Time to Recharge / Remaining Battery in Hours: Displays the
  estimated time required to recharge or the remaining battery life
  in hours.
• Current Input Power: Shows the current input power.
• Current Output Power: Displays the current output power.

Troubleshooting:

• AC Charging Failure: If AC charging is unavailable, it’s
  possible that the connected devices exceed 1000W. Try unplugging
  one or more of the connected devices to see if this resolves the
  issue.
• Resetting your Power Station: If your power station isn’t
  working correctly, insert a paper clip or pin into the reset hole
  for 1 second for a factory reset. If the Power Station still
  doesn’t work, please contact [email protected].

FAQ:

Q: Why does the power station’s battery drain even when
no devices are connected?

A: When the AC or Car Socket control button is turned on, even
if no devices are being charged, there will still be a certain
amount of no-load power consumption. To avoid this, make sure the
AC and Car Socket charging buttons are off or turn on the power
saving mode when you’re not using the Power Station.

Charge Fast, Live More
Anker 555 Portable Power Station (PowerHouse 1024Wh)
USER MANUAL

I
What’s in the Box

,r_

~c

~

~J:1

g ~

(@

)

~NKER

‘.

./

~

A

Anker 555 Portable Power Station (PowerHouse 1024Wh)

c:OIIIII iJ4 Car Charging Cable

c::::::J:c:Olllll:Jlllll::u@==~~ XT60 to DC7909 Connector

Overview

Solar Charging Cable

User Manual

200W AC adapter

e ; ” – =· r

= = = = t,,..NKER = = = = =

(

0

~

0

.!,

0

0

0

0

Output Ports:
0 Car Socket

Input Ports:

0 DC Input Port

~

8 USB Ports

0 AC Output Ports
–
01

Recharging Your Product
DC recharging (200W Max)
Recharge your power station by connecting to a wall outlet with the 200W AC adapter.

O=============O

0

0

Solar panel recharging (200W Max) Recharge your power station by connecting up to 2 100W solar panels in parallel with a solar charging cable and an XT60-DC7909 connector.

0

0

0

USB- C recharging (1 00W) Recharge your power station by connecting it to a charger via the USB-C port.

g :tt::i4:

==~e-;;;;tJ—-_-___ f!!f’ ct:=J======M~®~·

0_- _ _-_-__,(D

=====ANKER=====

_,,,’.·When your portable power station only has 1% battery remaining, the Remaining Battery indicators will
flicker to remind you to recharge the product.
02

Powering Your Devices
AC charging Press the AC button and connect you r devices to the AC output ports.
[[]] [[]] [[]] 0 0 0
[[]] [[]] [[]] POWER SAVING ( [ )
on I off
USB charging Connect your devices to the USB ports.

8 I I I I 100W 60W

60W

·IQ

‘ICI

-~

(§) (§)

Car socket charging Press the button on the car socket. connect your devices, and start charging.
C9″———–o 0
on I off
03

Power Saving Mode
Switching on the power saving mode prevents wasting power by automatically turning off the Power Station once all your devices are fully charged. Switching off the power saving mode will enable stable charging over an extended period, such as for timelapse photography or for sleeping with a CPAP machine.

CD POWER SAVING / –

-( D ,——- 0 n

PoweRsAv,NG

0- ) ~—- off

POWER SAVING

Light
Ambient light
Press the button once to turn on the ambient light. Press one more time to turn it off.

SOS mode Press and hold the button for 2 seconds to turn on SOS mode.

sos
0 25

04

LCD Screen Guide

·);>:·!

$Q (3

~

‘(:r ©”

1-inn ILILI %

+2J8888w

ln[)8888w 888 (9

lM lem,&,lan1en1HHr”s

oO “”‘1AY
LCD Screen Button Press the button to turn on the LCD screen.

8 l~)
Power Saving Mode
@ -:9:-fil
High-Temperature Alert
8 *~ · When this icon shows. stop using the product and leave 1t to cool down until the icon disappears.
Low-Temperature Alert · When this icon shows. stop using the product until the icon disappears.
0c >
USB-C Output/ Input Port

0~
USB-A Output Port

@~

Car Charging

A ~

60Hz

:Jr !j SOHz

AC Charging and Voltage Frequency

Press the AC output port on/off button for 2 seconds to switch the frequency.

01 %

Remaining Battery

g if: I'( g

Rechar1· Hrs

~

;;I ~

Re.mammgHrs

Time to Recharge / Remain ing Battery in Hours

Ow ~

in ~

Current Input Power

t) ·8 Dw

Current Output Power

05

Trouble Shooting
AC charging failure
If AC charging is unavailable, it’s possible that the connected devices exceed 1000W. Try unplugging one or more of the connected devices to see if this resolves the issue.
Resetting your Power Station
If your power station isn’t working correctly, insert a paper clip or pin into the reset hole for 1 second for a factory reset. If the Power Station still doesn’t work, please contact [email protected].

0

0

Reset – — – – – – – – – – – ~

FAQ
01: Why does the power station’s battery drain even when no devices are connected? When the AC or Car Socket control button is turned on, even if no devices are being charged, there w ill still be a certain amount of no-load power consumption . To avoid this, make sure the AC and Car Socket charging buttons are off or turn on the power saving mode when you’re not using the Power Station.
02: What’s the max power output of the AC output ports? The AC output ports can deliver a maximum of 1000W to connected devices.
03: Can I recharge the product while charging connected devices? Yes.
04: Can this product power a CPAP machine? Yes, but make sure to turn off the power saving mode first.
05: What kind of solar charger can charge this product? Any 11 – 28V solar charger with an DC7909 connector.

06

Specifications
Cell Capacity DC Input Solar Panel Input Car Charger Output AC Output USB-A Output USB-C Output/ Input (1 DOW) USB-C Output (60W) Discharging Temperature Charging Temperature Size Net Weight Gross Weight

1024 Wh 200W Max 11-28V ::: 10A(200W Max) 12V ::: 1DA 11 0V 9.09A, 50Hz/60Hz, 1000W Max 5V ::: 2.4A (2.4A Max Per Port) 5V::: 3A/9V ::: 3A/15V ::: 3A/20V ::: 3A/20V::: 5A (1 DOW Max) 5V ::: 3A/9V ::: 3A/15V::: 3A/20V ::: 3A (60W Max) -4°F-104°F / -20°C-40°C 32°F-1 04°F / 0°C-40°C 13.8 x 11.6 x 7.4 inch/ 350 x 295 x 188 mm 13.1 kg/28.9 lb 16.1 kg/35.5 lb

Attention
:X@ Not permitted on aircraft.

IMPORTANT SAFETY INSTRUCTIONS
WARNING – When using th is product. basic precautions should always be followed, including the following: Read all t he instructions before using the product. · To reduce the risk of injury, close supervision Is necessary when the product is used near children. · Do not put fingers or hands into the product. · Do not expose the product to rain or snow. · Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire,
electric shock. or injury to persons. · To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting
the product. · Do not use the product in excess of its output rating . Overload outputs above rating may result in a risk of fire
or injury to persons. · Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behavior resulting in fire, explosion or risk of injury. · Do not operate the product with a damaged cord or plug, or a damaged output cable. · Do not disassemble the product. Take it to a qualified service person when service or repair is required.
Incorrect reassembly may result in a risk of fire or electric shock. · Do not expose to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause
explosion. · To reduce the risk of electric shock, unplug the power pack form the outlet before attempting any instructed
servicing. · Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure
07

that the safety of the product is maintained. · When charging a device, the product may feel wa rm, this is a normal operating condition and should not be
cause for concern. · When charging the internal battery, work in a well ventilated area and do not restrict ventilation in any way. · Do not clean the product with harmful chemicals or detergents. · Misuse, dropping or excessive force may cause product damage. · When disposing of secondary cells or batteries. keep cells or batteries of different electrochemical systems
separate from each other. · Do not use or store the power station in direct sunlight for a long period, such as in a car, cargo bed, or any
other place where it will be exposed to high temperatures. Doing so may cause the product to malfunction, deteriorate, or generate heat.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. · Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an
explosion; · Leaving a battery in an extremely high temperature environment can result in an explosion or leakage of
flammable liquid or gas; · A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or
gas; · Unplug the AC power cable to disconnect from line voltage.
Storage and Maintenance instructions 1. Please store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the
product in a humid environment. 2. To preserve battery lifespan, please discharge the battery to 30% and recharge it to 60% every three months. 3. For safety, please do not store the product in an environment with a temperature higher than 113°F or lower
than 14°F for an extended period of time. 4. Please keep the product laid flat during use, when charging, and during storage.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . (4) Consult the dealer or an experienced radio/ TV technician for help.
The following importer is the responsible party. Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1-800-988-7973 IC Statement This device complies with Industry Canada license-lCES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le present appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioclectnque subi, meme si le brouillage est susceptible d’en compromettre le fonct1onnement.
OB

This digital apparatus complies with CAN ICES-003(8) / NMB-003(8). Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A1760 is in compliance with Directives 2014/35/EU & 2014/30/EU & 2011 /65/EU. The full text of the EU declaration of conformity is avai lable at the following internet address: https:/ /www.anker.com GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A1760 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is ava ilable at the following internet address: https:/ /www.anker.com . Anker Innovations Limited Room 1318- 19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong The following importer is the responsible party (contract for EU and UK matters) Anker Innovations Deutschland GmbH Georg-Muche- Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford , Hertfordshire, WD17 1HP, United Kingdom
09

Customer Service
5-Year Limited Warranty
®
Lifetime Technical Support
[email protected] [email protected] (For Middle East and Africa Only)
~
(US)+1 (800)988 7973 Mon-Fri 6:15AM – 5:00PM(PT) (UK) +44 (0) 1604 936200 Mon-Sat 6:00-19:00; Sun 6:00-14:00 (DE) +49(0)69 9579 7960 Mon-Fri 8:00 – 16:00 (Middle East & Africa) +971 42428633 Mon-Thu 9:00 – 17:30; Fri 8:00 – 12:00 (UAE) +971 8000320817 Mon-Thu 9:00 – 17:30; Fri 8:00 – 12:00 (KSA)+966 8008500030 Mon-Thu 8:00 – 16:30; Fri 7:00 – 11 :DO (Kuwait) +965 22069086 Mon-Thu 8:00 – 16:30; Fri 7:00 – 11 :00 (Egypt) +20 8000000826 Mon-Thu 7:00 – 15:30; Fri 6:00 – 10:00 (AU) +61 3 8331 4800 Mon-Fri 8:30 – 17:00 (AEST) (TR) +90 (850) 460 14 14 Mon-Fri 9:00 – 18:00 (RU) +8 (800) 511-86-23 Mon-Fri 9:00 -18:00 (MSK)
( cp~) +86 400 0550 036 /sJ ~/sJli 9:00 – 18:00
( 8*}0344557823-IFB 9:00-17:00/$*$~~~<
(~ l +82 02-1670-7098 ~ – -§ 1o:oo – 17: oo
10

For FAQs and more information, please visit:
anker.com/support

0 0

@anker_official @Anker Deutsch land @AnkerOfficial

@ a n k e rj p

@Anker Japan

@Anker_JP

@Anker

Product Number: A1760 51005003353 V02

References

• download - Anker US
• Anker | Live Charged. - Anker US