12028 M9N GPS Module
Product Information
- Product Name: Holybro M9N GPS
- SKU12027: Holybro M9N GPS with JST GHR1.25mm 10 pin cable
- SKU12028: Holybro M9N GPS for Pix32 with Molex1.25mm 6pin &
4pin &3pin cable - SKU12029: Holybro M9N 2nd GPS with JST GHR1.25mm 6pin
cable - Dimensions: Please refer to the user manual for detailed
dimensions
Product Usage Instructions
- SKU12027: This GPS module is designed to be
used with Pixhawk Series 10pin GPS Module or GPS1 input port.
Connect the JST GH 10Pin connector to the corresponding port on
your Pixhawk device. - SKU12028: This GPS module is specifically
designed for Pix32. It features Molex1.25mm connectors for Pix32
Switch, GPS, and I2C input ports. Connect the appropriate
Molex1.25mm connectors to the corresponding ports on your Pix32
device. - SKU12029: This is a secondary GPS module that
can be used with Pixhawk Series 6pin UART & I2C or GPS2 input
port. Connect the JST GH 6Pin connector to the secondary GPS port
on your Pixhawk device.
Please refer to the user manual for detailed instructions on
installation and configuration of the Holybro M9N GPS module.
#12027 #12028 #12029
M9N GPS
Descriptions The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 38400 5Hz Features and Specifications: – Ublox Neo-M9N module – Industry leading 167 dBm navigation sensitivity – Cold starts: 26s – LNA MAX2659ELT+ – 25 x 25 x 4 mm ceramic patch antenna – Rechargeable Farah capacitance – Low noise 3.3V regulator – Current consumption: less than 150mA @ 5V – Fix indicator LEDs – Protective case – 26cm cable included – Diameter 50mm total size, 32 grams with case.
Pin Map SKU12027 Holybro M9N GPS (JST GHR1.25mm 10 pin cable): This JST GH 10Pin connector can be use d on Pixhawk Series 10pin”GPS Module” or “GPS1” input port.
SKU12028 Holybro M9N GPS for Pix32 (Molex1.25mm 6pin & 4pin &3pin cable): These Molex1.25mm 6pin & 4pin &3pin connectors are for Pix32 “Switch”, “GPS”, and “I2C” input ports.
SKU12029 Holybro M9N 2nd GPS(JST GHR1.25m m 6pin cable) This JST GH 6Pin connector can be used on Pixhawk Series 6pin”UART & I2C”or ” GPS2″ input port as secondary GPS.
Page | 2
www.holybro.com
Dimensions
Package Included: M9N GPS Module *1 `X’ type folding pedestal mount *1 Carbon rod 70mm & 140mm *1
DIMENSIONS IN MILLIMETERS
Holybro is a registered trademark of Holybro, registered in the U.S. and other countries. ©Copyright 2018 Holybro. All Rights Reserved.
Page | 3
www.holybro.com
Holybro - Build your drone from here
