Baby Lock Blcs-clf Serger Clear Foot Instructions

BLCS-CLF Serger Clear Foot

Product Information:

Product Name: Baby Lock Serger Accessories – Clear Foot

Model Number: BLCS-CLF

Manufacturer: Baby Lock

Usage: This clear foot accessory is designed to provide better
visibility when attaching ribbons and lace, or for guiding
lightweight decorative stitching. It is especially useful when
working with thick fabrics or when precise positioning is
required.

Product Usage Instructions:

  1. Attach the Clear Foot securely to the Baby Lock Serger.
  2. When threading for cover stitch is complete, ensure that the
    loose threads initially interlock on the fabric. This is crucial
    when sewing the chain or cover stitches.
  3. Place the fabric under the Clear Foot, aligning it properly for
    stitching.
  4. Start the serger and allow it to feed the fabric evenly without
    pushing or pulling. The Clear Foot provides a clear view of the
    stitching area, ensuring accurate and precise results.

Note: For optimal performance, always refer to the user manual
provided by Baby Lock. If you require further assistance, contact
Baby Lock customer support at 800-422-2952 or visit their website
at www.babylock.com.

Baby Lock
Serger Accessories
Clear Foot
(BLCS-CLF)
Instructions
Use the clear foot for better visibility when attaching ribbons and lace, or for guiding lightweight decorative stitching.
When cover stitch threading is complete, the loose threads should initially interlock on fabric. This is most important when sewing the chain or cover stitches.
PREPARING THE MACHINE -(Any stitching application can be used). Select one and check the instruction book for length and width setting for specific stitch selection. 1. Cut all threads to 4 inches (10cm) in length. 2. Place fabric under the presser foot directly below the needles. 3. Lower the presser foot. 4. Turn the handwheel toward you to form 2 or 3 stitches. 5. Start to sew slowly. 6. After the first few stitches, stop and cut excess threads. 7. Start the next seam at the toe of the presser foot. 8. You only need to raise and lower the presser foot when working
with thick fabrics or when precise positioning is required.
Note: Be careful not to push or pull the fabric. The BLCS will feed it evenly without help.

LNIS-BLCSCLF

800-422-2952

www.babylock.com

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals