BLE-BLHFS Blindhem Foot
Product Information
The Blindhem Foot (BLe-BLhFS) is a specialized sewing foot
designed for creating invisible hems on a serger. It can also be
used for quick stitching along fabric edges. The foot is compatible
with machines that have a right needle and an engaged UNLOCKED
upper knife. It is designed to work with a 2-thread thread tension,
a stitch width of 4.5 mm, and a stitch length of 3.5.
Product Usage Instructions
- For hemming, fold the fabric as shown in the diagram.
- Place the garment with the wrong side up under the presser
foot. - Before starting the serging process, check the needle dropping
position. Ensure that the needle just catches the fold of the
fabric. - Once the needle dropping position is determined, set the
adjustable guide on the foot to the fold edge of the fabric. - To adjust the adjustable guide, loosen the screw on top of the
foot, move the plate right or left, and then retighten the
screw.
Blindhem Foot
(BLe-BLhFS)
instructions
Looking for a quick, easy way to make your hems invisible? This foot was designed specifically for easily stitching a blindhem on a serger. You can also use this foot for quick stitching along fabric edges.
Machine SettingS
Needle:
Right needle
Sewing foot:
Blindhem Foot
Upper knife:
Engaged “UNLOCKED”
Thread tension: Set for 2-thread
Stitch width:
4.5 mm
Stitch length:
3.5
inStructionS: 1. For hemming, fold fabric as shown in diagram. 2. Place garment with wrong side up under the presserfoot.
Before you begin serging, check the needle dropping position. Theneedle should just catch the fold of the fabric. 3. Once the needle dropping position has been determined, set the adjustable guide on the foot to the fold edge of the fabric. Move the adjustable guide by loosening the screw on top of the foot, adjusting the plate right or left and retightening the screw.
