Sen Long East Technology HS005 Wireless Charger
Package Details
- Wireless charger
- Type-c cable
- User manual
Important Tips
- Do not disassemble or modify this product by yourself.
- Keep the charger away from water and other liquids.
- To clean the charger, make sure that no power is plugged in.
- Do not put any metal on the charger, such as coins, keys, bank cards.
Wireless charger instructions
Put the phone in the middle of the wireless charger and the wireless charging light turned on.
Specifications
Name: Wireless Phone Charger Input: 12V/1.67A
Charging output: 5V/1A, 9V/1.2A,12V/1.67A Power: 5W, 7.5W, 10W, 15W
Transmission distance: less than 6mm Charging efficiency: about 80%
| LED indicator | Description |
| The light is not bright | Standby |
| The light is bright | Wireless charging is on |
| Flashing lights | The location is not in place or security is activated |
Applicable equipment .
- Built-in wireless charging receiver (Iphone12,Iphonex,iphone8, iphoneX, Samsung S6, etc.)
- Add an extra receiver (iphone7 etc.
Note: These receivers must comply with the WPC QI standard for compatibility.
Care and Cleaning
Wipe the adapter, data cable, and charging stand with a rag or paper towel. Never enter the water.
Troubleshooting
| Problem | Possible causes | What to do |
| No power | The grid is out of power | Change the power socket |
| No power | The power cord plug is not in place | Put the power cord plug in place |
| No power | Adapter or power cord is broken | Replace |
| No power | Charging block circuit is bad | Contact the dealer |
| Flashing light | The appliance is not in place | Put the appliance in place |
Warranty
Thank you for purchasing our product, which has been made to meet high quality standards. The manufacturer’s warranty covers the product for a period of 12 months from the date of purchase against manufacturing faults.
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
