Intasting Kd-2028 Double Wall Electric Kettle User Guide

Intasting KD-2028 Double Wall Electric Kettle

SPECIFICATIONS

Thank you for purchasing the Intasting Cool Touch Electric Tea Kettle. Please read this manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

PACKAGE CONTENTS

• Cool Touch Electric Tea Kettle
• User manual
• Power Base

IMPORTANT SAFETY INFORMATION

IMPORTANT: Please read, understand, and comply with all of the instructions provided in this manual before using the device. Failure to comply with the instructions given in this manual or using

the device not mentioned in this manual may cause serious personal injury or equipment damage.

GENERAL SAFETY

• Do not touch hot surfaces. Use handle. Do not touch the base or metal walls of the kettle during or immediately after operation.
• Do not fill the ketle above the “MAX” line. This may cause water to boil over and may cause scalding
• Closely supervise children near the kettle. Do not allow children to use or play with this kettle.
• Do not immerse the kettle, base, cord, or plug in water or other liquids.
• Unplug the kettle when it is not being used and before cleaning. This will avoid electric shock and prevent moisture from causing a short circuit in the power base while it is plugged in.
• Do not use outdoors.
• Place the kettle on a dry, flat surface. Do not place the kettle on or near heat sources such as stove tops, ovens, radiators, etc.
• Do not turn on the kettle while the lid is open.
• Always make sure the lid is closed while the kettle is operating.
• Do not cover the spout opening while the kettle is operating.
• Only use the kettle as directed in this manual.
• Household use only.

Plug and Cord

• Do not let the cord (or any extension cord) hang over the edge of a table or counter.
• Do not allow the cord to touch hot surfaces.
• This kettle uses a short power-supply cord to reduce the risk of entangling or tripping. Use extension cords with care.

GETTING TO KNOW YOUR COOL TOUCH ELECTRIC TEA KETTLE

USING YOUR COOL TOUCH ELECTRIC

Before First Use Please do water test

CAUTION!

Do not use the kettle if it is damaged. Contact Customer Support to replace your kettle.
Perform the Water Test before using your kettle to make sure it’s working properly. Do not drink the water that is boiled during this initial test.

1. Remove all parts from the package and carefully inspect each part.
2. Completely unravel the power cable and place the power base on a flat, level surface.
3. Press the Lid Release Button to open the lid. [Figure l]
4. Fill the kettle with water to the “MAX” line, then close the lid. [Figure 1.2] Place the kettle onto the power base. Plug in.
5. Press the On/Off Switch. The blue indicator light will turn on. [Figure 1.3]
6. The kettle will automatically turn off once it has finished boiling the water. Allow it to cool for at least 5 minutes, then pour out the water.

Use your Cool touch electric kettle –Boiling Water

Do not boil other liquids in this kettle. This kettle should only be used for boiling water.

1. Press the Lid Release Button to open the lid.
2. Fill the kettle to the desired level. Do not fill above the “MAX” line. [Figure 2.1]
3. Close the lid and place the kettle onto the power base. Plug in. [Figure 2.2]
4. Press the On/Off Switch. The orange indicator light will turn on. [Figure 2.3]
5. The kettle will automatically turn off once it has finished boiling the water.

CARE AND MAINTENANCE

Descaling the Kettle

You should descale the kettle at least once a week if you use it frequently. Descaling removes any mineral deposits that have built up inside the kettle. Always descale the kettle after it has been stored for long periods of time and before storing it.

1. Fill the kettle with l cup of distilled vinegar or lemon juice and 2 cups of water (l:2 ratio).
2. Boil the mixture, then let it soak in the kettle for 2 hours.
3. Pour out the solution, then wipe the lime scale away with a cloth or non- abrasive sponge.
4. Rinse the kettle with clean water, and dry with a soft cloth.
5. Repeat as needed.

WARRANTY

Offacy provides a Two-year product warranty from the date of purchase for all our products.
We will take care of all quality-related issues with a REPLACEMENT or FULL REFUND including any return shipping costs. If your product is defective and under warranty, please contact us at Email: [email protected]
Please carefully follow our warranty process to minimize any delays:

1. Note the product model name. It can be found on a sticker located underneath or on the back of the product
2. Provide order number for a purchase made through Amazon.
   Typical turn around time to address Warranty claims is l O business days, depending on your geographical location and type of damage or Warranty claim.

This warranty does not apply to the following:

• Damage due to abuse, accident, alteration, misuse, tampering, or vandalism.
• Improper or inadequate maintenance.
• Damage in return transit.
• Unsupervised use by children under 18 years of age.

Offacy and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

ALL EXPRESSED AND IMPLIED WARRANTIES,  INCLUDING THE WARRANTY OF  MERCHANTABILITY, ARE LIMITED TO THE  PERIOD OF THE LIMITED WARRANTY.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

CUSTOMER SUPPORT

Any issues or questions regarding your new product, please feel free to contact us.

Email: [email protected]

Phone: +1833 721 2799 (US) Mon-Fri 9 am 5 pm (PST)

Please have your order number ready before contacting Customer Support

FAQs

How little is enough? On most days, I want to boil 16 ounces, or 0.4 litres. Does this endanger the kettle?

0.5L is recommended as the minimum volume for heating water.

Does the warmer base of the kettle separate from it?

The warming base is separate from the kettle.

Do these two levels exist in this electric kettle? Now that the water has boiled, how hot is it outside? Is it hot?

This electric kettle’s outer layer is insulated with BPA-free plastic, while the inner layer is fully constructed of stainless steel. The outer kettle’s temperature falls below 45° after the water has boiled, which is still far below the temperature at which one would be scorched but only slightly greater than that of the body.

Anybody notice any water spots on the kettle’s base?

Since the internal volume, or “bottle,” is entirely composed of drawn stainless steel, I don’t think it is theoretically possible. I did, however, confirm my. It’s awfully dry. I’ve previously left water there. Perhaps some of that inside “bottle” tore off during manufacturing. If so, you need to replace it and give it back.

Can the Intasting KD-2028 electric kettle stay heated all day long?

Except if you press the warming button.

Can I keep water in my electric kettle, an Intasting KD-2028, over night?

Make sure to drain all of the water from an appliance when not in use. The apparatus is harmed by limescale buildup caused by water storage in the kettle. Limescale buildup can be prevented and the kettle’s lifespan will be increased by emptying it.

Does using a kettle to boil water use a lot of electricity?

Kettles exist in a number of types and brands, just like other appliances, and each one is built differently and consumes energy at a different rate. A normal kettle produces 2 to 3 kilowatts of power (kw).

How quickly can water be heated in an Intasting KD-2028 electric kettle?

When compared to the gas burner’s little more than 412 minutes and our microwave’s 6 minutes and 45 seconds, the electric kettles took between 4 and 512 minutes to reach boiling point.

What is the Intasting KD-2028 electric kettle’s safety feature?

Most electric water heaters have a switch that automatically turns them off when the water reaches boiling temperature. The switch should always be in working order, according to homeowners. Failure to do so will increase the possibility of spillage and electrical lines heated up to their boiling point.

How long can you use an electric kettle from Intasting KD-2028?

The average lifespan of a high-quality electric kettle is 4 to 5 years. 2. A change in the flavour of the water: It’s time to acquire a new electric kettle if the freshly boiled water tastes metallic or if its colour is changing.

What components make up the electric kettle by Intasting KD-2028?

Electrical components of a tea kettle include the heating element, a thermostat that turns the kettle off automatically if it boils dry, an on/off switch and its accessories, a connector that joins the element to the cord, and the socket.

How can you tell when an electric kettle, the Intasting KD-2028, is finished?

All contemporary electric kettles have an automated shut-off feature that stops the heating operation when the water boils.

How hot can an electric kettle from Intasting KD-2028 get?

Most more expensive electric kettles feature temperature settings that go from roughly 100 degrees Fahrenheit up to boiling; some have preset temperatures, while others show the water’s actual temperature rising by 1, 5, or 10 degrees Fahrenheit stages.

How is the deposit on the Intasting KD-2028 electric kettle removed?

Once the kettle is 3/4 full, add either water and one lemon or equal parts water and vinegar (household vinegar is fine). Allow it to soak for an hour. Warm the kettle (three times for lemon, once for vinegar) After allowing it to cool, thoroughly rinse it.

VIDEO