TH-SF0189 Tribesigns Fanny 3 Light
Product Information
The Wall Light SKU# TH-SF0189 is a fixture that can be installed
on a wall to provide lighting. It has been rated for up to 60-watt
maximum TYPE A bulbs or 13-watt compact fluorescent light bulbs or
9-watt LED bulbs. The product is safety listed for dry locations
and may be dimmed with a standard incandescent dimmer. The package
includes a junction box, single mounting bracket, canopy screws,
fixture, fixture wires, leading wires, glass screws, socket, bulb,
mounting plastic, and machine screw.
Usage Instructions
Before starting the installation of the light fixture, turn off
the electrical power. Ensure that wiring supplies are as required
by local electrical code. The product must be installed in
accordance with the applicable installation code by a person
familiar with the construction and operation of the product and the
hazards involved. Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have resulted during
shipping. If there is a defect in the wire, do not attempt
installation.
To clean the fixture, turn off the power, wait for it to cool,
and wipe the fixture with a clean, soft cloth. Never spray cleaner
directly onto the fixture.
When assembling the fixture, follow the steps provided in the
instruction manual:
- Attach the junction box to the wall.
- Attach the single mounting bracket to the junction box using
the mounting screws (D and C). - Attach the machine screw (P) to the center hole of the mounting
bracket. - Connect the fixture wires (G) to the supply wires (B) using UL
listed wire nuts. - Attach the canopy screws (E) to the canopy and then attach the
canopy to the mounting bracket using the glass screws (J). - Insert the bulb (L) into the socket (K).
- Attach the glass (M) to the fixture.
- Mount the fixture to the wall using the mounting plastic (N)
and wall screws (Q).
If you encounter any problems with the fixture, refer to the
troubleshooting section of the instruction manual:
| Problem | Possible Cause | Solution |
|---|---|---|
| The bulb will not light. | The power is OFF. | Ensure the power supply is ON. |
| There is a faulty wire connection. | Check the wiring. | Contact a qualified electrician. |
| The fuse blows or circuit breaker trips when the light is turned ON. | The circuit breaker is OFF. There are crossed wires or the power wire is grounding out. | Ensure the circuit breaker is in the ON position. Check the wire connections. Contact a qualified electrician. |
Assembly Instructions Wall Light SKU# TH-SF0189
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
SAFETY PRECAUTIONS:
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE. 2. WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE. 3. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
4. TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: Product may not look exactly as shown in figures. CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
This fixture has been rated for up to 60-watt maximum TYPE A bulbs or 13-watt compact fluorescent light bulbs or 9-watt LED bulbs . To avoid the risk of fire, do not exceed the recommended wattage. This product is safety listed for dry locations. This product may be dimmed with a standard incandescent dimmer.
Assembly Steps:
1. N
Q
2. D,C
A
3. P
N
4. G,H
B
5. F,E
C
6. L
K
7. M
F
8. J
F
WHITE SUPPLY WIRE
BLACK SUPPLY WIRE
WHITE OR IDENTIFIED FIXTURE WIRE UL LISTED WIRE NUTS
PLAIN OR BLACK FIXTURE WIRE
ALAMBRE DEL SUMINSTRO BLANCO
ALAMBRE DEL SUMINSTRO NEGRO
ALAMBRE BLANCO O IDENTIFICADO DE LA LAMPARA
CONECTADOR UL CALIFICADO ALAMBRE NEGRO O NEUTRO DE LA LAMPARA
BARE, OR GREEN GROUND WIRE FROM SUPPLY
BARE, OR GREEN FIXTURE GROUND
WIRE
OR BARE, OR GREEN GROUND WIRE
FROM SUPPLY
GREEN GROUND SCREW
ALAMBRE DE TIERRA
VERDE O NEUTRO DEL SUMINISTRO
ALAMBRE DE TIERRA VERDE O NEUTRO DE LA LAMPARA
O ALAMBRE DE TIERRA
VERDE O NEUTRO DEL SUMINISTRO
TORNILLO DE TIERRA VERDE
Trouble Shooting
Problem
Possible Cause
Solution
The bulb will not light.
The power is OFF.
Ensure the power supply is ON.
There is a faulty wire connection. Check the wiring.
The fuse blows or circuit breaker trips when the light is turned ON.
The circuit breaker is OFF.
There are crossed wires or the power wire is grounding out.
Ensure the circuit breaker is in the ON position.
Check the wire connections. Contact a qualified electrician.
Part Included
Code
Part description
A Junction Box
C Single Mounting Bracket
E Canopy Screws
F Fixfure
G Fixfure Wires
H Leading Wires
J Glass Screws
K Socket
L Bulb
M Glass
N Mounting plastic
P Machine screw
Q Wall
QTY 0 1 4 1 3 0 9 3 0 3 2 2 0
Hardware included
B Wire Nuts
4
D Mounting Screws
3
