Sunmax Rt-50 Hand Push Automatic Washing Machine User Guide (+ PDF)

Contents hide

1 RT-50 Hand Push Automatic Washing Machine

2 Product Information:

2.1 Frame Components:

2.2 Control Panel Components:

2.3 Water Suction Motor Components:

2.4 Floating Head Components:

2.5 Additional Components:

3 Product Usage Instructions:

3.1 Documents / Resources

RT-50 Hand Push Automatic Washing Machine

Product Information:

The product consists of various components that make up the
frame, control panel, water suction motor, and floating head. Each
component has a unique serial number and description.

Frame Components:

Base Plate – Quantity: 1
Wheels – Quantity: 2
Spacer – Quantity: 2
Bearing – Quantity: 4
Shaft Cover Bolt – Quantity: 2
Casters – Quantity: 2
Washer – Quantity: 2
Nut – Quantity: 4
Screw – Quantity: 8
Spring – Quantity: 4

Control Panel Components:

Control Cabinet Bolt – Quantity: 1
Key Switch Assembly – Quantity: 6

Water Suction Motor Components:

Elbow – Quantity: 2
Connecting Bracket – Quantity: 1
Connectors – Quantity: 4
Gasket – Quantity: 1
Water Suction Motor Nut – Quantity: 1
Hose Casing – Quantity: 4

Floating Head Components:

Top Cover – Quantity: 1
Seal Ring – Quantity: 1
Matching Grid – Quantity: 1
Screw – Quantity: 3
Filter Gasket – Quantity: 1
Cover – Quantity: 1
Floating Head Bucket – Quantity: 1
Hose – Quantity: 1
Hose Sleeve – Quantity: 1
Casing – Quantity: 1

Additional Components:

Silencer – Quantity: 1
Sponge Core – Quantity: 2
Bolt – Quantity: 1

Product Usage Instructions:

Assemble the frame components in the following order:
1. Attach the Base Plate to the Wheels using the Spacer and
  Bearing.
2. Secure the Shaft Cover with Bolts.
3. Attach the Casters using Washers, Nuts, and Screws.
4. Install the Springs and Bolts as needed.
Mount the Control Panel components:
1. Secure the Control Cabinet Bolt.
2. Attach the Key Switch Assembly to the designated
  locations.
Connect the Water Suction Motor components:
1. Connect the Elbow and Connecting Bracket.
2. Install the Connectors, Gasket, Water Suction Motor, Nut, and
  Hose.
3. Secure the Casing.
Assemble the Floating Head components:
1. Attach the Top Cover, Seal Ring, Matching Grid, and
  Screws.
2. Install the Filter Gasket, Cover, Floating Head Bucket, Hose,
  Hose Sleeve, and Casing.
Additional Components:
1. Attach the Silencer, Sponge Core, Bolt, and Bolts as
  needed.