Skullcandy IndyEvo / Indy XT Evo User Manual

Skullcandy IndyEvo / Indy XT Evo User Manual

User Guide

Auto Pair Mode

Pairing mode

Auto Power ON

Auto Power OFF

Charge Earbuds

Charge Case

Pairing Mode

Off mode

Pair New Device

“Indy Evo”

Power – ON

Left side 01 and Right side 02

Power – OFF

Left side 01 and Right side 02

Play Pause

Track Forward

Track Back

Volume Up

Right Side 02

Volume Down

Right Side 01

Answer/End

Left side 01 and Right side 02

Activate Voice Assistant

Left side 01 and Right side 02

Clear Paired Device

Reset Device

Left side 01 and Right side 02 “Off mode”

Download The Tile App

Pair Tile

3 EQ Modes

Change equalizer modes

Music, Movies, and Podcast

Ambient Mode

Question Visit: www.skullcandy.com

Description

Speaker Driver: 6mm,
Impedance: 32 Ohms, THD <3%@1KHz,
Voltage Regulation: 5V, 500mA, Bluetooth® 5.0,
Frequency Band: 2402MHz — 2480MHz,
Maximum Power: 10mw,
Weight: 63.5g.

Maximum operating temperature 45 °C.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

ISED Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1 )This device may not cause interference.
(2)This device must accept any interference, including interference that may cause undesired operation of the device.

ISED SAR Compliance Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body.

Americas

Skullcandy, Inc.
6301 N Landmark Dr. Park City, UT 84098 U.S.A.
Skullcandy.com

Canada

Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver BC V6A 1A4 Canada
Skullcandy.ca

Europe

Skullcandy Europe BV
Postbus 425
5500AK Veldhoven Nederland
Skuncandy.eu

Mexico

Skullcandy Mexico S de RL de CV
Atistoteles 218
Polanco IV Seccion, Miguel Hidalgo
11550, Mexico City, Mexico
Skulicandy.m

Japan

Skullcandy Japan
150-0001
Skullcandy.jp

Contains Li-ion battery. Battery must be recycled or disposed of properly.

Hardware Version: V1.4
Software Version: V3.0